These pages should set you on the right path:
http://www.sprayfly.com/wiki/User_Management_Guides
Jono
Type: Posts; User: jonolumb
These pages should set you on the right path:
http://www.sprayfly.com/wiki/User_Management_Guides
Jono
Here are couple of useful guides:
http://www.sprayfly.com/wiki/FTP_Users
http://www.sprayfly.com/wiki/User_Management_Guides
Hope this helps
Jono
There are some in-depth guides on samba to be found here:
http://www.sprayfly.com/wiki/Samba_Guides
Hope that solves your problems. It may be helpful to start from scratch to undo any damage you...
If I have interpreted your question correctly, this guide on my wiki should help.
IPTables guide.
Jono
I use VSFTPD and its great. Never crashes- its rock solid and I've found no bugs at all.
Guide here-
http://www.sprayfly.com/wiki/VSFTP
pretty easy to setup- make sure you have done all the...
/dev/discs/disc0]
If you do a list command there:
ls -ag
you will see the device files:
disc
part1
part2 etc
(part1, 2 will only be there if you have partitioned your disk)
hey there
all that usage looks a bit heavy
ive run thttpd on this and it is really sluggish on even the most basic html pages. Those data rates will probably not be achieved either. I have no...
its back up now :)
Hi there, you quoted http://www.sprayfly.com/wiki/User_talk:Jonolumb
as a source in your OpenVPN guide.
In fact, I was using the talk page to gather together the key elements together for a...
Hi all
One of my readers has recently contributed an OpenVPN guide to my WL-HDD wiki at http://www.sprayfly.com/wiki
The guide goes into a great depth of detail, both in installing the server on...
Hi all
One of my readers has recently contributed an OpenVPN guide to my WL-HDD wiki at http://www.sprayfly.com/wiki
The guide goes into a great depth of detail, both in installing the server on...
Hi there, I write the guides on sprayfly
After installing samba, you also have to install NMBD http://www.sprayfly.com/wiki/NMBD
to make the device "visible" in My Network Places. Otherwise, you...
another user has posted this problem up (although its in Russian which I do not understand!)
http://wl500g.info/showthread.php?t=5326&highlight=unslung
No solution posted as yet!
Jono
Hi there.
I write and host the WL-HDD wiki guides on http://www.sprayfly.com/wiki
A reader has recently noticed that the directory http://ipkg.nslu2-linux.org/feeds/unslung/wl500g which is referred...
Hey, I did not know this either- this could be handy for some users.
I will add it to my guides on my wiki
http://www.sprayfly.com/wiki/Samba_Troubleshooting
Thanks
Jono
Check out this guide on committing changes to flash:
http://www.sprayfly.com/wiki/Committing_to_flash
Jono
i answered then realised the settings I had quoted (for iptables) were the same as yours!
So I deleted my post
Post Firewall can be installed and run from /usr/local/sbin/post-firewall
See this...
Hi there, I am afraid that I know very little about the factory install firmware from asus as the first thing I did when I got my WL-HDD was to upgrade to Oleg's firmware!
Believe it or not, it is...
sorry, I don't know how much you know so don't be patronised by this but have you have tried enabling the FTP port (21) from WAN using Iptables?
There is a guide on how to do this on my wiki:...
For anybody interested, I have created a shell script that automatically installs VSFTPD onto your WL-HDD or Wl-500g.
Documentation is on this guide (my wiki), the script has not yet been tested (I...
These Guides may help you?
http://www.sprayfly.com/wiki/Samba_Guides
When Oleg suggested that the WL500g cannot power the Hard disk sufficiently, me was referring to the fact that some USB hard disks draw all their power from USB.
also, check /opt/etc/init.d/vsftp
check this line is included:
user = admin
change admin if you have changed any usernames on the WL-HDD (it is the username you use to login to the web...
in your /usr/local/sbin/post-boot file, you should have the following:
#!/bin/sh
# wait for /opt to mount
mount /dev/discs/disc0/part1 /opt
i=0
while [ $i -le 30 ]
do
if [ -d /opt/etc ]
then
Hi there ralf
First of all, thanks for your edits on my wiki, there were a couple of mistakes and your input is appreciated!
VSFTP is part of xinetd.d, however, you do have to create a separate...