I have found my solution:
Had to :
-wget http://oleg.wl500g.info/1.9.2.7-9/modules-1.9.2.7-9.tgz
-tar modules-1.9.2.7-9.tgz
-modprobe works !!!!!!!
My adapter is now attached
I'm using...
Type: Posts; User: ebk71
I have found my solution:
Had to :
-wget http://oleg.wl500g.info/1.9.2.7-9/modules-1.9.2.7-9.tgz
-tar modules-1.9.2.7-9.tgz
-modprobe works !!!!!!!
My adapter is now attached
I'm using...
After installing 6c-pre5 I followed the steps at macsat again for configuring ipkg and samba. After a lot of fiddling I can't find it. The smbd process is started 3 times, but which script could do...
It looks like my problem with long write failures is over:)
I don't have a clue. But maybe this idea? After reconfiguring and having assigned a static ip adress to your pc, use the asus tool for discovering the wlhdd. Maybe this tells something about the...
How did you configure your network settings? You talk about dhcp, did you configure wlhdd to be your dhcp? How are ip settings on your pc? Both must be in the same ip range, something like 192.168.x.x
There's no real step by step manual. Look here:
http://wl500g.info/showthread.php?t=1984&page=3
That will get you started en also look at macsat.com for tutorials about installing samba,ftp etc.
...
Well, samba is for sharing......
Why did you install Oleg's fw? What do you want to do?
For just plain functionality as harddiskspace(sharing) and wireless use, stick with the original fw....
I also mean the drive built in.
Make sure you have enabled samba demo mode and share in the webpage. The you will have acces to
192.168.1.1\share$
Will this be soon?:)
I searched on the forum about this and the one and only who experienced this had probably a full disk.
I had Oleg's latest fw 6b installed and when backing up from xp there were multiple long write...
In your smb.conf must be something like:
[Share]
path = /opt/{name of folder}
writeable = yes
browseable = yes
With ls -al you can see permissions on files/folders and...
Yes, why shouldn't? Just follow the tutorials on macsat.com en start with the tut about ipkg packaging. Then your drive will be mounted, partitioned, formatted etc.
Attention: in samba tut is only...
When you disconnect your usb drive and give the command df, you will probably see also "/dev/discs/disc0/part1" ,with my wlhdd, that's my drive......
Otherwise you have to mount it?
And what...
Having same problem here, same drive,same os.
Other backup software, using oleg's fw. 1.9.2.7-6b.
Before I used Jockyw's fw. , no problems at all.
I partitioned my disk as ext3 filesystem(after...
It seems /opt/etc/samba/smb.conf is not used but instead:
/etc/smb.conf
Can this behaviour be changed or did it go wrong elsewhere?
There's was a wrong line in my post-boot, after changing...
I added smbd -d and nmbd -d to post-boot,
so now samba is running and I can access share$.
But the other shares I made are not shown in explorer.
Under MS windows network, my workgroup, I see my...
After 2 days of trying I need HELP!
(well, in time more over.....) :p
Installed latest Oleg FW 1.9.2.7-6b, works fine, no problem.
But then I got to the macsat tutorials. If it comes to the tut...
I also experienced problems to get FTP running.
But after installing firmware and files from JockyW(look in the forum) setting up FTP was pretty easy.
Make sure rights on your partition and or...
Many thanks for the big response.
I managed to restore firmware. After all, wl-hdd was allready in restore operation(blinking pwr led), and what I explained, pwr led goes off when trying to restore,...
Firmware restoration:
I connect wl-hdd to power, pwr led flashes, start firmware restoration, select 1.2.3.0 or JockyW firmware and click upload. Pwr led stops flashing then only led for network is...
I had firmw. 1.2.3.0 running. Installed JockyW firmw. 1.1.2.8 with files. Until I had to flash, everything was going fine. It stopped when flashing. Now when I turn it on, pwr led flashes and after...
Hi there,
After reading all about wl-hdd in this forum(it's not much :-( and less to find on the rest of the internet or google failed on me), I have some q.
I'm using firmw. 1.2.3.0, running...