Wollte da auch noch was dazu schreiben weil viele sagten ihr FTP Upload funktionierte nach dem Updatet nicht mehr.
Ich hatte das problem auch aber ohne Olegs Firmware das lag an dem letzten...
Type: Posts; User: Twisterchen
Wollte da auch noch was dazu schreiben weil viele sagten ihr FTP Upload funktionierte nach dem Updatet nicht mehr.
Ich hatte das problem auch aber ohne Olegs Firmware das lag an dem letzten...
Hallo
Nein Nein keine 2 Router nur 1 ner der is im Keller und im 2 Stock steht ein PC mit PCI Karte und der hat ab und zu probleme kommt auch oft aufs wetter drauf an
na ich werde das ganze...
Hallo
na die USB Anschlüsse sind es bei mir nicht die sind für mich unwichtig mir gings eigentlich nur darum wegen der höheren Sendeleistung ( besseren ) na ich werd das wohl noch eine weile...
Hallo
Na brauchen hmm is so ne frage wie ich schon beschrieben habe ist im 2 Stock bei mir manchmal die Verbindung unterbrochen und drum würde ich es gerne etwas erhöhen nur ist halt die Frage ob...
Hallo
ja im Webinterface kann mann nur 84 einstellen aber in über Telnet kann ich auch mehr einstellen und dann erhöht sich auch der mw wert nur ist halt jetzt die Frage ob das überhaupt was...
Hallo
Sagt mal mach ich irgend etwas falsch ?
Oder hat hier wirklich keiner eine Antwort auf meine Fragen.
Gruss
Twisterchen
Hallo
Sagt mal mach ich irgend etwas falsch ?
Oder hat hier wirklich keiner eine Antwort auf meine Fragen.
Gruss
Twisterchen
Hallo mal ne frage zu der Sendeleistung:
wenn ich da jetzt statt 84 - 94 eingebe kann da was im gerät kapput gehen ?
wl txpwr1 -o -m 94
Vielen Dank
Brandmeir Gerhard
Habt ihr mir keine Infos zu meiner Frage ?
Vielen Dank Brandmeir Gerhard :)
Hallo
Also ich habe eine WL500g router mit Version 1.9.2.7-7b und bin Superzufrieden
Nur im 2 Stock verlässt in manchmal die Kraft nun möchte ich wissen obs zu dem Router von Netgear WPN 824...
Hello
I hafe the same problem with zero size of Settings.cfg it is 0 Byte too at me.
and another what i see in the log
Jan 1 01:00:22 pppd[58]: Warning - secret file /tmp/ppp/pap-secrets...
i have no problem to connect do t-online / Germany
i connected
ok my problem is
i have only set idle timer to 300 sec but my router does not disconnect after 300 sec
no Tx selected i dont understand it for what i need this
but my connecting does not...
ok
the idle timer not work right ?
ok no problem i have a flatrate but for people he doesn 't have a Flatrate it s a big problem
comes a Update from OLIG ?
i understand it when i check Tx...
Hello
can any one say me for what Tx only stand
i think my router 500g dous not terminate the conecting to isp with idle time 300
what must i do
Thanks
Twisterchen
yes i can connect to \\192.168.100.50\share
but how i can configure smb.conf change Useres and Passworts ........
Thanks Twisterchen
[twister@Twisterchen root]$ mount
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)...
Sorry my mistace my router not in AP mode he is in Home Gateway not AP
Twisterchen
[twister@Twisterchen root]$ cat /proc/sys/kernel/hostname
Twisterchen
[twister@Twisterchen root]$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.100.50 Twisterchen my.router...
No idea any one
Gives no Tool to Configure a smb.conf
and how i can upload to my router ?
Thanks
Twisterchen
command back after I the host names of rout had changed could I connecten only as can I my smb.conf configure now
it gives perhaps which like Webmin over samba to configure
Thanks ...
my router does work it in AP mode and 192.168.100.50 is the adress from my WL500g router
\\192.168.100.50\share it come the same nothing
but i say again I must configure not first my...
Hi
ok when i do this enter \\192.168.100.50\share$\
then come nothing but i think i must configure my smb.conf but how i can
with windows Telnet or what
Thanks for Help
Twisterchen
PS:
in the evening after the work i test it and then i response
Thanks
Twisterchen
OK
What must i do to
must i connect with telnet and then configure or what must i do
configure /etc/smb.conf with hand or can i configure with a webinterface
Thanks for Help