Search:

i do not fully understand your configuration, but i think you should bind your route to br0 instead of eth0. i think the bridged interface should do the trick

cu harald

try this package http://www.reimann-trusheim.de/wl700g/openvpn-wl700g_2.0.7-1_mipsel.ipk . It contains the tun.o kernelmodule for asus wl
700g. I compiled the moudule myself and i am using it for...

try tmpuserchgpw instead. this is also used in the fix_passwd.sh scriptt in /opt/etc/init.kc

cu Harald

First off all grab a Linux-tutorial on the net, before you damage your router!
You are logged in as user root. There is nothing else to do

you need to set yout hostname first using /opt/bin/hostname MYHOSTNAME.

the result "(none)" shows there is no hostname set on your system

I have put a line like

/opt/bin/hostname $(cat...

use your asus-cupsd a a raw printer! install your driver (HP ?) on your windows/mac/linux system and install the printer in windows with internet printing (ipp) as your printing device (networked or...

try starting cupsd from the commandline as first test.
if this succeds you should add this to your rc.local
I had only a entry like /opt/sbin/cupsd in my rc.local and no S*cups. these scripts are...

I think your problem is in your printers.conf
printer.o seems to be ( as far as i remember for parport printing ) this module is not present on your router

you need to set your device to...

My Favorites are:

- tun/tap module and openvpn
- newer mt-daapd with a writable configfile and playlistfile
- cups
- perhaps appletalk support in networking (and netatalk, but that could be...

Why don't you use nfs ?
It's more native and faster between two unix systems ( I count OS X as a *nix ), the linux kernel supports it directly and OS X has no Problems using nfs either.

Another...

Using the standard asus tools, you have to add your printer as a windows-printer using the gimp-print drivers. The shares could be mounted using smb or nfs ( I would prefer nfs for Mac OS X, because...

No, it will not work !
Only the modified firmware executes the rc.local file. So if you write your own rc.local it will simply be ignored.

rootprep.sh is as i recall used in the building process....

"All" you need to do is follow the Instructions/Howto at openvpn.net klick here for OpenVPN-Howto
A great help is a complete installation of openvpn on your PC. You can use openvpngui for windows or...

all your thoughts are going boldly nowhere !

The wl700g uses the linux 2.4 softraid feature to build the mirror.

simply type :
cat /proc/mdstat

and you see the raid configurations

i have...

Sorry, i had moved the file :( . You can try again now.
This "Version" includes the needed module tun.o compiled for the wl700g
the module will be placed in /opt/lib/modules.
So you have to insmod...

Sorry for answering after so much time ;)

You have to edit mt-daapd.postinst and change
# !/bin/sh
into
# !/bin/bash
of course you must have bash installed on your System :D

cu
Harald

After having the same Problems (printer not connected, printd gone, ...) i have completly switched to cups, which is ( in my opinion) the best possible solution for *ix, Mac OS X, and windows. there...

i have succesfully installed mt-daapd 0.2.4-2 using the following configuration

web_root /opt/share/mt-daapd/admin-root
port 3689
admin_pw XXXXXXXX
db_dir ...

if a script fails with syntax error on the wl700ge, you usally should use bash to execute it.

try ipkg install bash
and change #!/bin/sh in /opt/etc/init.d/S90sctcs into #!/opt/bin/bash.
This...

Hi!

for your first problem i would suggest you simply use the notation:
\\IP.OF.YOUR.WL700GE\MYSHARE1
if you have your standard share named MYSHARE1

For Mac you have a lot of options.
If you...

Reset your router to default settings (hold reset for more than ~5sec.)

After that you can start from the begining.

just search the forum for usba, there are more people with problem like...

Sorry, I completly missed your post. By now you have already figured it out by yourself :D

Here are my (personal) tips for mac users:

If you would like to connect a printer to the wl700gE, my...

Sorry, but enhanced-ctorrent and the ctorrent from asus are not 100% compatible regarding their commandline arguments. :mad:

I have tried to exchange ctorrent with enhanced-ctorrent, but you need...

i like that approach. But i will move the start of utelnetd inside the if $bypass .. block. This way i only need telnet when something goes wrong.
Most of the time (actually allways since several...

I had the same problem, but reseting the router to its original settings (hold reset for more then 5 seconds) will bring it back alive, this will rewrite __pdc/passwd and set the router to password...