OK, I'm getting tired of all this... If I can't make this work, I'll just have to send the APs back to the supplier...
New test setup:
AP1 (((about 12 m))) AP2 (((about 50 cm))) PC ...
Type: Posts; User: einarmr
OK, I'm getting tired of all this... If I can't make this work, I'll just have to send the APs back to the supplier...
New test setup:
AP1 (((about 12 m))) AP2 (((about 50 cm))) PC ...
It's not supposed to be a mesh network, but a tree network. If you configure the APs to connect in rings or meshes, this might lead to loops in the network if the APs do not implement the Spanning...
OK, after some more testing:
When I try with only two APs, it works reliably now. Both using WPA and without encryption. I enter both APs MAC addresses in both APs Bridge settings.
For...
Both are in Hybrid mode. I'm using WPA/TKIP/PSK.
I've tried that, but it doesn't make any difference.
I suspect that there is a problem using WPA with WDS. I'll test this setup with WEP or...
You are right. Test setup:
AP1 (with wired Ethernet): 10.14.54.243
AP2 (no wire): 10.14.54.141
PC: 10.14.54.140
Physical setup:
PC <----(about 1 meter)---> AP2 <--(about 10...
Hello!
Obviously, I would like to extend the range of my WL-300g.
I have radio power set to 19, the Asus recommended default. How far up can I safely increase this setting?
What kind of...
Hi!
I have bought eight WL-300g APs, and I'm planning to distribute them throughout an office building and use WDS (with only one of the APs connected to the wired Ethernet).
I use the devices...