Search:

I "just" had to power cycle the router, reboot will not do. Then my usb stick got detected automatic.

You need to ask your provider (your company?) for the STUN-server name/IP. Why not try setting up and play with your own private SIP/VoIP account?

I am using both Sipura SAP 2000 (www.sipura.com) and the PC porgram X-Lite (www.xten.com), connected via wl500g, and it works great on Oleg's "standard" software.

I know that some gear only works...

Tested@
Model: WL-500g
Firmware: WL500g-1.9.2.7-5a-pre2.trx
Hardware: 1.0

Device OK:
Brandname: Apacer
Brandtype: Handy Steno HT202
Memory: 1 GB
USB Interface: USB 2.0 highspeed

Works for me. Thanks for your help.

From WL500g-1.9.2.7-5a-pre1.trx no trick.

Yes and yes. At the end I managed to be unable communicate with the router if I attached the WAN cable!?! So I more or less gave up the post-firewall approach. Then I tried the GUI approach.

The trick:

killall p910nd
p910nd -f /dev/usb/lp0 0
do not do any difference on (my ;) ) WL500g-1.9.2.7-5a-pre1.trx.

Sorry, but WL500g-1.9.2.7-5a-pre1.trx do not work for my, but different than WL500g-1.9.2.7-5.trx. Look like some missing/corrupted/extra chars are sent to the printer. I just do the "Print Test...

For me this works only if I disable the firewall and then not all my unused ports are stelth. Anyone with the same problem?

As a workaround for the missing firewall I created this Virtual Server...

According to the Sipura documentation you can limit the number of ports used for RTP. If you limit the used ports I think you will be able to use the simple WEB-interface for the Upload Policy List...

Anyway, thanks for the trick - and firmware.

That makes me able to print again, great. Can I insert the codelines in post-boot to make it a permanent fix for me?

Yes, RAW port 9100

Already done that - no change, sorry.

Hi Guys,

I got trouble with my USB printer. It just print incomplete jobs. No problems on WL500g-1.9.2.7-4.trx.

From the System Log:

Jan 1 01:00:11 kernel: printer.c: usblp0 Device ID...

I used this forum search facility and searched for "*httpd", then I was up and running. Be aware that the information on this subject is not the right place to start creating your first web-server!
...

I use the FTP-client (and soon a web-site) build-in the WL500g, so I perfere the DDNS client in the WL500g.

I will take a look on the /init/ddnsclient - when I get some spare time. I am open for...

Hi,

Thanks for the tip.

Is there a way to automate the updating, this was actual what I mend by “a fix”?

Anyway
Thanks

Hi,

I am using ddns and got the following message from dyndns.org:

A hostname you have registered with Dynamic Network Services at DynDNS.org, X.X.X, with current IP address X.X.X.X, will...

When I enable the Firewall I am not able to make VPN passthrough work. else OK.

I was not able to configure the filter table and port trigger (lack of patience) to make it work, even that I was...

Yes you can, see http://wl500g.info/showthread.php?s=&threadid=44

(Reported Compatible Hardware, USB Memory Stick)

When browsing this forum remember to show "from the beginning"!

Found at http://www.asus.com.tw/support/download/item.aspx?ModelName=WL-100g&Type=Latest

Description
a. The ASUS WL-100g Cardbus Card utility progrm in English.
b. Utility release...

Newer used it my self, but byond the user manual you can find help here : http://www.timhiggins.com/Sections-article50-page1.php

Let us know about your status.

According to Compaq (ftp://ftp.compaq.com/pub/softpaq/sp23001-23500/SP23107.txt) :

ENHANCEMENTS:
- Broadcom 802.11b, 802.11g driver Version 3.40.25.3
- Support for SoftAP in Windows XP
...