Search:

I don't think this would enter the scope of what is usually considered "RTC".
You can use any kind of network-time tool, like NTP, rdate, ...

There may be such a limit for the Asus firmware (sounds odd, tho possible).
But I'm using OpenWRT so any limit would just come from the Linux kernel and filesystem. The `ext3' has some limits that...

Don't know about Windows, but from GNU/Linux, it was fairly straightforward. I just took the old drive out, connected it to my desktop, along with the new drive, copied the whole drive "dd...

Thank you. I've adapted the package for Kamikaze so it now runs on my WL-700gE with 2.6.25.20 (and even automatically adapts to either one of wl-hdd and wl-700ge).


bzr clone...

It appears this driver hasn't made it upstream yet. Is it available somewhere other than in Oleg's own sources? E.g. is it available for OpenWRT somewhere?

I just installed a 1TB drive in my WL-700gE and it works like a charm.
Since such large drives are difficult to come by in PATA, I ended up using an adapter (I used a "Sabrent IDE Ultra ATA-100/133...

It seems like a better option might be to fix this problem that the wlan uses the drive. You can set /proc/sys/vm/block_dump to 1 which will cause all disk accesss to be logged via klogd/syslogd;...

[ No thanks for hijacking my thread. ]



You mean the drive doesn't even spin up (otherwise, it's clearly a different problem from mine).



So it *is* spinning, at least when you put it in...

My almost-brand-new WL-700gE is not answering any more and the drive isn't spinning up any more.
I had installed OpenWRT on it and at some point while I was copying a lot of files from an external...

The other posts answered your question, but here are some more numbers:
- hdparm on the IDE drive gives a raw read bandwidth slightly above 20MB/s (for the 160GB drive).
- hdparm on an external...

I'm looking for a tutorial that explains how to install a *.nas firmware (such as ASUS's original or Kfurge's custom version) when the web-interface is not working (any more) and when you don't have...

Oh, great! Thanks.


Yes, I know. But I'd like to replace it with 2 laptop drives: there should be
plenty of space and power, but that will only work if the provided PATA interface supports the...

I'm considering buying one of those WL-700g units to replace my current
wrtsl54gs+usb-drive but am concerned about two things:
1 - how noisy is it? My current setup has no fan, whereas the wl-700g...

Does the WL-500g have an additional USB port inside that could be used with a bit of soldering work to connect a 2.5" drive?
I've seen articles in this forum to do it on the WL-500gx, but I only...

I haven't tried MP4s, but most likely your CPU can't keep up. Check with `top' the CPU use of mpd, most likely it'll pegged pretty close to 100%. Not knowing much about MP4, my guess would be that...

I've upgraded my main router to a WRTSL54GS and am using my WL-500g as an ethernet bridge for my desktop computer.

It mostly works OK: I have put the WL-500g in "AP mode" (as opposed to gateway...

Basically store the read-only /usr somewhere:


mount -o bind / /opt/flash

then mount some read-write directory over /usr:


mount -o bind /opt/usr /usr

Works great, thank you.
The only probem is that the dropbear that comes in the firmware tries to run /usr/libexec/sftp-server but /usr is read-only so I had to do some funny "mount -o bind" fiddling...

I'd like to have my router serve as a kind of file-server that my wife could access from her office.
Has anyone setup something like that already?

I'd like the system to use mostly Free Software...

Has anyonce compiled an sftp-server binary for the WL500g?

I haven't seen such interruptions, while playing MP3 at 160Kb/s or Ogg at 192Kb/s, except one of the times that I was doing a lot of NFS transfers from the WL500g. Do you hear it even when there's...

Thanks. Still, regarding your example: all the brand/product info I got on the eBay page is basically "adapter A07" and if I google for it I can only find a backref to eBay or refs to discussions...

Has anyone managed to use public key authentication with the dropbear daemon?
I've added the .ssh/authorized_keys file and it seems to work since the /tmp/syslog
file says

Mar 9 17:23:51...

Can't find any actual specs for the WL-HDD in this Forum.
I seem to remember there were specs posted here back when the WL-HDD was released, but maybe I dreamt it?

Anyway, so here come the...

I've looked at the thread in this forum and can't seem to find a clean and complete spec.
From what I've read, it seems the unit has 2 USB2 ports and 32MB of RAM.
What about the CPU? Is it much...