for SSH take a look at www.macsat.com and the tutorials.. (http://www.macsat.com/JustSSHGuide.php)
Type: Posts; User: JohnSK
for SSH take a look at www.macsat.com and the tutorials.. (http://www.macsat.com/JustSSHGuide.php)
Use WPA PSK with AES and some nice 63 random PSK, the Broadcom CPU has support for this type of encryption in HW.. as for slowdowns, using 2 WL-500Gx I see no difference in speeds.
Two WL-500Gx, 1km link, 80% LOS
TX power on first WL-500gx = 14mW (using 15 dB antenna,1m pigtail)
TX power on second WL-500gx = 8 mW (using a 22dB antenna,5m pigtail)
Max throughput: 2,5MB/s...
hello ppl
is it possible to get information on the number of transferred packets via wireless and/or ethernet ports on the WL-500G (deluxe) ? If yes, please advise how...
Thanx a lot!
john
Just noticed one problem... the AP sometime resets to defaults :( This seems to have been fixed in the official 1.9.3.6 FW from ASUS (1. Fix: reset to default problem). Is there any way to fix it in...
Why don't you just look for the proper name when you telnet to the AP?
cd /dev/XXX ....
ls
this should be enough for you to find proper device name..
Thanx, but I am using both WL-500gx in AP mode.. I am asking because it seems that after using eMule and exiting it the LAN and AIR LED's keep blinking for some hours and then all of a sudden stop....
working fine so far.. could you perhaps implement a setting to allow the max number of TCP connections and also timeout for these connections? (i.e for ppl who use eMule or other p2p tools..)
hello again,
can someone tell me how to limit the maximum number of connections the WL-500g deluxe tracks and also how to set a timeout for these connections? On the WRT54G I used the following:
...
have you tried...
http://koppel.cz/cdmawifi/ ?
mozno pomoze...
john
hi ppl
I was wondering what speeds are ppl getting when transferring between two WL-500gx. With my 1km link I get around 1,5-2,5 MB/s when doing FTP transfers which seems VERY good compared to what...
That's what I needed to know ... thanx a lot :)
One more question -- is there a page which lists added features in Oleg's FW over the official FW? Also, is Oleg's a command line only or does it have a web interface? Thanxx
hi ppl
this is for those running their WL-500G's in bridge mode. I wanted my AP's (one as AP, other as AP Bridge) to synchronise with the NTP servers, yet there was no option when running in AP...
This official FW works very nice.. no dropouts, client works with WPA, nice speed (1,5km link @ 2MB/s average)
Thanx a lot.. :cool: I was cautios because it seems that DD-WRT v.23 bricked the AP beyond any repair -- so everyone else beware if you wish to try DD-WRT.
hi ppl, me again. I bought a new AP (the old one I bricked is still non working) and this time I will try Oleg's FW instead of DD-WRT. My big question is:
Will Oleg's FW work properly on ASUS...
Thanx for help.. I used this forum because forums dealing with DD-WRT are 99% LinkSys only. I will have to look into the problem again, the whole AP is dead as it doesent respond to resetting, nor...
hi everyone,
I received my Asus WL-500G Deluxe today and I flashed DD-WRT v.23, build date 27/10/05, ASUS binary. Everything went OK, after first reboot the firmware loaded up no problem.
But...