Oleg,
If you finally decide to leave ipv6 in the firmware, may I suggest that you incorporate the small change that I made.
http://wl500g.info/showthread.php?t=471&highlight=ipv6
With it I...
Type: Posts; User: arch
Oleg,
If you finally decide to leave ipv6 in the firmware, may I suggest that you incorporate the small change that I made.
http://wl500g.info/showthread.php?t=471&highlight=ipv6
With it I...
I also use the ipv6 in your firmware (for which a million thanks).
I have a native ipv6 account with my isp here in France, and the wl500gx is a reasonable (that is, affordable) way to make the...
Does the audio work in both directions? I carried out a similar experiment a couple of years ago, and the audio worked only in one direction. In particular, I had the Palantir server on my Linux box...
I suspect that there is, but I just have not looked into it. There are certainly many discussions here about going the other way, i.e,, audio to the wl500. Sorry I cannot help you.
I suggest that you contact the Palantir site www.fastpath.it I suspect that you will be told 2.7 will fix the problems.
As I was told about a year ago, there are two issues. One, something has...
The audio problem with Palantir 2.6 is well known. The creator of Palantir is working on version 2.7 which, hopefully, will solve the problem. In particular, a goal is to have two-way audio plus...
Although it is true that ipv6 on the wl500g's has a few bugs, one can connect natively to an ISP through a bridging modem using pppoe and pppd. See my remarks elsewhere on this site.
I also...
I could not see it in the picture: can each antenna be unscrewed so that a high-gain antenna can be connected?
I now have a native ipv6 connection through my wl500gx router.
In the "Additional pppd options" window of IP Config-WAN&LAN in the internet interface I entered
ipv6 , ipv6cp-use-persisten
...
I uploaded the modified firmware, and it seems to be working. I say "seems" because I have used it for just a couple of days.
Looking at the output of dmesg immediately after reboot shows the...
I have recompiled 1.9.2.7-7e with every #HAVE_INET6=y changed to HAVE_INET=y. I lack the courage to upload it into my wl500gx because I am afraid that it might be too big. How can I tell?
Here...
When I tried to enter some standard ipv6 things in "Additional pppd options" of the internet interface the wl500gx would no longer connect to internet. This was even the case when I entered the...
I now know a bit more about ipv6 neighbor solicitation in systems using wl500gx’s and wl500gP’s. I will refer here to my system setup which I described a couple of messages ago.
First consider...
My careful editing got garbled after submission.
On the wired Ethernet LAN are a PC running Windows XP, a wl500gP acting as a wireless access point, and a PC running Linux.
Wirelessly...
My conclusion is that a wl500gx running Oleg's firmware does not handle an ICMPv6 Neighbor Solicitation correctly. Another, peripheral conclusion is that my Fedora Core 4 box does not handle...
Has anyone cross-compiled dhcpv6 for the wl500gx? An ipkg package would be wonderful, but google tells me that there is none.
I am trying to use a wl500gx with Oleg's firmware to connect natively...
Can the wl500gx with the latest firmware operate as an IPv4/IPv6 dual stack machine? Thanks in advance.
Thanks for the reply.
I have seen smixer discussed here in the forum, but it seemed that it was something extra that I would have to install. So I was first trying to understand the audio support...
HOW CAN i ACCESS THE MIXERS IN MY WL500GX AT /dev/sound/mixer AND /dev/sound/mixer1? I have tried a number of things and searched this site, but I have not found the trick. I need to know this to...
I forgot to say that my packet sniffer shows that the video frame rate is far higher than the audio frame rate. This is objective evidence that the cpu spends most of its time on video, just as one...
I have run several tests of Palantir whose results may be of interest. I wanted to see how Palantir functioned when I was NOT using a wl500gx. That way I hoped to tease out how wl500gx affects...
I have run
killall waveserver
killall waveservermain
The video of Palantir 2.6 works well, I get a frame rate between 3 and 4 fps. Using the top command I see that Palantir video is using about 95% of the cpu time.
However, there is a serious...
I finally was able to connect to Palantir 2.6 from the WAN side. The problem was my fault: I don't know enough about Linux yet. After reading some more in my brand new Linux books I saw my silly...
I have set the IP address wl500gx to 192.168.1.247. Part of the output of "nvram show" is as follows:
usb_webremote_x=0
lan_gateway_t=192.168.1.247
qos_maxbw_x=
That is, the lan gateway...