Search:

Type: Posts; User: expert_vision

Search: Search took 0.01 seconds; generated 20 minute(s) ago.

  1. Sticky: As long as it outputs the same voltage (5 V) and...

    As long as it outputs the same voltage (5 V) and more or at least 2.5 A, its a good replacement.
    You could try the one that outputs 5V with 2.0 A as long as you don't use any USB devices. Even if 2...
  2. Sticky: Yes, sdram_init=0x0013 should enable 16-bit mode...

    Yes, sdram_init=0x0013 should enable 16-bit mode (instead of 32) with 10 columns, those disabling the second chip U4 and detect 64MB. In fact that's what I used to enable 64MB ram on my WL-500gP V2...
  3. Sticky: Here (http://oleg.wl500g.info/sdram.html) is an...

    Here is an explanation of what those commands do.
    I myself upgraded wl-500gP V2 to 64 RAM (one chip) and everything was fine.

    From what I understand after issuing those commands you will be able...
  4. Sticky: I don't think an startup script will make any...

    I don't think an startup script will make any difference since the nvram value is used during early CFE loading, you have to reboot to apply changes .. I think.
    The flash chip is repartitioned in...
  5. Replies
    282
    Views
    155,101

    Sticky: Where are /usr/local/sbin/post-* files located in...

    Where are /usr/local/sbin/post-* files located in rt-n releases ?

    Edit:Never mind, I figured it out .. I mean it is the same, I made a typo in #!/bin/sh and was misled by results .. silly.
  6. This will solve only the initial error message,...

    This will solve only the initial error message, but then installation will fail .. I don't remember exactly where, but after you choose some options and click next installation hangs. Anyway I solved...
  7. Sticky: I'm not an expert, but I think is because of the...

    I'm not an expert, but I think is because of the RAM .. if there is no RAM, there is no CPU, and if is no CPU there is nothing .. no response. When I first upgraded my RAM, router didn't start .. all...
  8. Sticky: Nope .. LAN1 is completely dead.I have a...

    Nope .. LAN1 is completely dead.I have a dual-boot system (XP-can't remember last time I used it until now :p,win 7) and both give no response on LAN1 (ping,telnet,ssh), but LAN2 works fine. Weird...
  9. Sticky: Not Bricked

    Well, my router is not bricked at all. Just when I was ready to prepare for using a JTAG cable I stumbled across this link about serial connector. Gave it a try and noticed that router was working...
  10. Sticky: WL-500gP V2 kinda bricked

    Setup:
    WL-500gP V2
    Firmware:WL500gpv2-1.9.2.7-d-r3328

    Behavior:
    -when I power the router, LEDs shows activity, power LED goes steady on, wifi LED shows very little activity (usually showed more...
  11. Replies
    2
    Views
    2,609

    I was trying to avoid opt 1 (linux noob), but opt...

    I was trying to avoid opt 1 (linux noob), but opt 2 looks much better :D
    Thanks
  12. Replies
    2
    Views
    2,609

    How to modify Read-only file system

    I want to change /usr/ppp/uni/dial file, but I can't because is protected by OS (WL500gPV2 1.9.2.7-d-r2710).So, how can I modify it ?
  13. Replies
    152
    Views
    127,880

    I know it is in the how-to, but since I used...

    I know it is in the how-to, but since I used lighttpd before without epoll, I thought it wasn't mandatory, and apparently that changed in the new version.
    And hey .. thanks for still supporting this...
  14. php-fcgi incompatibility

    ADOS is not compatible with php-fcgi 5.2.17-1 or the new version has bugs. I had to replace /opt/bin/php-fcgi with the one in this archive mentioned in here, which is version 5.2.6-1. And now it...
  15. Replies
    152
    Views
    127,880

    Got it

    No .. it didn't start even with the config file.
    Anyway I looked in the error.log and found this

    2011-06-11 23:40:14: (log.c.166) server started
    2011-06-11 23:40:14:...
  16. Replies
    152
    Views
    127,880

    lighttpd won't start

    I installed lighttpd and whenever I start it, immediately closes without any warnings. If I type lighttpd without any option :

    [admin@WL-00221561958C root]$ lighttpd
    2011-06-11 22:55:25:...
  17. Thread: Raid1

    by expert_vision
    Replies
    10
    Views
    9,557

    Create RAID 0

    I have a WL500gPV2 with Oleg Firmware - WL500gpv2-1.9.2.7-d-r2710
    I installed MDADM and now I need to load modules md and raid0.
    I downloaded modules from here.

    But now if I try to load them I...
  18. Replies
    5
    Views
    2,709

    Pointer

    I hope no one gets upset that I revive a 3 years old thread, but I found this useful.

    I installed bash and managed to use arrays, but I need something like a pointer for this code:

    for i in...
  19. Replies
    3
    Views
    4,762

    Did you figure it out ? I have the same problem...

    Did you figure it out ? I have the same problem ...
Results 1 to 19 of 19