Strange...
I copied the sample out of my own passwd file (I only changed the password-hash into -------) But I can use the user ftp for ftp, but not for ssh.
I'm using ProFTPD, and apparently...
Type: Posts; User: DrChair
Strange...
I copied the sample out of my own passwd file (I only changed the password-hash into -------) But I can use the user ftp for ftp, but not for ssh.
I'm using ProFTPD, and apparently...
replace the shell of the users in /etc/passwd with /sbin/nologin
example:
root:---------------:0:0:root:/usr/local/root:/bin/sh
nobody:x:99:99:nobody:/:/sbin/nologin...
I had a similar problem with streaming big .mkv files to my Xtreamer.
I solved it mostly by switching from SMB to NFS.
(with NFS i can read files at 4,5 MB/s, where SMB doesn't get higher than...
Welke firmware gebruik je ?
Ik had dit in het begin ook met de originele asus firmware, dat wifi enorm traag was. (maar dan op een wl500gP)
Met de oleg firmware was dit opgelost.
hmmm you're right, I didn't completely read that last post.
I only saw insmod: unresolved symbol rpc_wake_up_task and that's exactly the error you get, when you try to load nfs.o without the other 2...
I think I found the problem
nfs.o needs 2 other kernelmodules: sunrpc.o and lockd.o
So first insmod sunrpc, then insmod lockd and finally insmod nfs
now it should work...
From the man-page of thttpd:
BASIC AUTHENTICATION
Basic Authentication is available as an option at compile time. If enabled, it uses a password file in the directory to be protected, called...
don't know if you can call it a fix, but I solved (iirc) a similair problem by downgrading make to version 3.80 on my build pc...
In the other thread I suggested to drop the -o cause you weren't using options, but in this thread you are.
However the syntax for mount is : mount [flags] DEVICE NODE [-o OPT,OPT]
So your...
what command are you using to install your self compiled ipkg, and what's the filename??
The "official" optware repository also has hello_2.3-1_mipsel.ipk, so if your self compiled version has the...
Just a thought: does the directory ./test exist ??
Also the -o is only needed when specifying options, which you aren't doing...
So drop the -o and maybe use an absolute path...
for example:...
It doesn't make any difference...
one USB-stick and one hhd on a 2.0 hub work fine, if I add a second hdd, there's trouble... I'm starting to thing the hub is broken...
cat /proc/bus/usb/devices...
Normally you would name the script ip-up and place it in /etc/ppp
unplug and plug usb hdd again doesn't make any difference...
I flashed r550, and that version does find my harddisks again
(only with one of the 3, it now finds that the usb cable is bad, so I...
r566 is older than r573...
But anyway, i tried that version aswell (downloaded from googlecode), and there I have the same problem.
Just flashed this firmware, but now the router doesn't mount my harddisks anymore.
Also /dev/disks isn't present.
All disks are behind a usb2.0 hub. The strange thing is that the hub gets...
Is /lib writable on Tomato?
Otherwise libpthread wouldn't be that useful.
Cause the twonky binaries search their libraries in /lib
If /lib is readonly, the only way to get twonky to work,...
You are trying to use the wrong version.
You need the version for Asus WL-HDD2.5
echo "/tmp/etc/passwd" >> /tmp/local/.files
vervolgens flashfs save && flashfs commit && flashfs enable && reboot
(alle bestanden genoemd in .files worden in ook flashfs opgeslagen)
ipkg install buildroot
(it's 42 Mb big, so you need swapspace, diskspace and patience ;) )
Also usefull:
ipkg install optware-devel
(it contains the other packages needed for compiling)
If there are no USB disks connected, there is nothing to mount...
So probably post-mount doesn't get called.
try putting it in post-firewall, or post-boot
Oke, for now I assume libusb-1.0 (and compat-libusb) isn't full compatible with the current kernel.
So let's try to find out why the the libusb-0.1 version crashes the router.
If I remove the...
since the libk8055 doesn't work with libusb-compat and doesnt work with libusb-0.1.12 on new oleg, I ported it to libusb1.0.
I tested the ported source on i368 ubuntu -> here it works with...
In the meantime I solved the pthead error, by adding -lpthread to libs in the Makefile.
And I found out, the libk8055 isn't functioning with libusb-compat.
But on old oleg it gives an error,...
I also had that problem after following this tutorial.
I solved it by commenting-out the password line in my.cnf (like it was by default).