Maybe it doesn't work because that's a wl-500g deluxe and the interfaces configuration are slightly different.
I think that the script will have to be modified in order to reflect the interfaces...
Type: Posts; User: njs
Maybe it doesn't work because that's a wl-500g deluxe and the interfaces configuration are slightly different.
I think that the script will have to be modified in order to reflect the interfaces...
er.. sorry.
Please post here the output of the ifconfig and iptables -L -t nat
What is your router model ?
Nuno
Can you post here your interfaces configuration ? (ifconfig) and iptables -L -t nat ?
Regards,
Nuno
My modem is configured with IP: 192.168.2.254 .
Here http://oleg.wl500g.info/#tips you'll find what you need to have the firewall rules to be properly setup whenever PPPoE restarts.
Hope this...
Ok...
I found it out.
Here's the solution:
ifconfig eth1 192.168.2.1 netmask 255.255.255.0
iptables -t nat -I POSTROUTING -o eth1 -d 192.168.2.0/24 -j SNAT --to-source 192.168.2.1
Hi
I think the topic name is self explainable, I have the following configuration:
ISP -> ADSL Billion 711 CE Bridged Mode -> WL-500g PPPoE -> Private Network
The management IP of the modem...
Hi all,
As reported previously by many people, after a short period using eMule or other p2p application the wireless LAN goes down being necessary to reboot the router.
This was happening to me...
I guess it's just for a while... I have a Intel Pro Wireless 3000B and it says disconnect, and after a while it connects again, although I cannot access internet until I reboot my laptop. Sometimes...
I Have exactly the same problem.. The WLAN dies from time to time, mainly when I'm running eMule.
Anyone knows any solution for this problem?
NJS
You don't need to use Windows 98SE for that, Ranish runs from a bootable floppy disk..
Hi :D
I think Asus staff read this forum. And uses the info in it to upgrade their firmware. eheheheh
Did anyone tried uPnP with this firmware ? is it better? (I didn't have the chance to test...
Hi
This is my configuration.
When not using the router, it works OK.. connection is done in 2 or 3 seconds and only happened once to lost connection in incoming voice...
If I use the router, it...
hi
I'm having some problems with the audio in msn...
Sometimes the incoming audio, better saying, the received audio is stopped... The other person gets port unreachable icmp packets, in 90% of...
Maybe this is off-topic, but....
If you have a USB DSL Modem, how can you use it in this router ? :confused:
Probably I missed something.. :)
Thanks.
Nuno
This would be AWESOME !!! :)
Any ideas on how to do it?
Nuno
Well, this is really interesting... :) Security? Sure.. ehehehe.. :rolleyes:
Although, it does not explain why in other routers it works without problems but on this one it doesn't.
I never had...
Hi
I'm having similar problems.
Here the problem is not the audio, because once it is connected I can hear and be heard.
The problem is getting it to connect. Sometimes it works, and takes ages...
And US Robotics also.
But in USR you can go to the web administration and set the port to whatever you want. and in this way the router behaves right.
I had this problem also.
Bye
Hi
Since we are able to play with the firmware, which are the possibilities of having this router using a USB ADSL Modem as WAN access ? It would be very usefull...
Hope to hear from you soon....