Is it still needed to recompile firmware to make use of both serial ports of the asus wl500g deluxe with the new firmware? I only found a 5 year old thread about recompiling the kernel, but I have...
Type: Posts; User: mistraller
Is it still needed to recompile firmware to make use of both serial ports of the asus wl500g deluxe with the new firmware? I only found a 5 year old thread about recompiling the kernel, but I have...
I'm selling my wl500gx routers, because I'm migrating to other hardware. But I have still some memory chips messing around here, which will fit for the Deluxe router! So, if you're interested in...
First deluxe is upgraded to 64MB!
First test was not good, there was no output on serial port. I looked again, and there was one tiny connection between 2 pins.
That did the trick!
Router...
Finally, I found hardware, AND time to do this upgrade. At the moment I'm practicing myself with desoldering/soldering the chips. I use the method as described earlier, with wick and a 40W soldering...
All 4 usb ports are in use, and GPIO is free to use. I don't want to add an USB hub, if gpio ports are available.
Maybe not the easiest solution, but the most interesting for me, because i want to...
I would like to use GPIO lines for monitoring some signals, and to power an external led.
I have no clue however, how this should be done. I've read something about the diag driver on OpenWRT, but...
Bash will work for sure.
ipkg install bash will do the trick.
If you change your passwd file, you can set bash as default shell.
Keep in mind that bash will be installed into opt, which will be...
Yes, it's easy, I use some array's in SolGet, my solar monitoring script.
For instance, i have a file where some values are saved. I get them into an array with cat:
array1=(`cat $file`)
...
I used gparted several times to resize for my wl500g partitions, works as a charm! I also cloned my disk for a second asus with gparted.
Take care if you split partitions before your main ext3...
Can you tell me how to upgrade from the former version? I upgraded par2cmdline, but how about patching sadnzbd?
I had a similar problem with my solar monitoring project. (No sun=> no reaction from inverter => waiting until sun comes up...grrr)
I solved it using:
"Some time consuming command"
PID=$!...
nvram zijn je settings van de router. (Van de webinterface etc)
Check
nvram show | more
Nee, het feit dat de ftp server bereikbaar is heeft niets te maken met het feit of de service draait.
Iets verwijderen doe je met ipkg remove packagename
die libiconv.so miste ik hier ook.
Ter info: httpd is de configpagina van je router zelf. Die draait op poort 80.
Als je nu zowel intern als extern zonder een poortnummer wil werken, dan moet je...
hmm da's dus gewoon de originele. Er is een verbeterde uclibc tov die in de oleg firmware zit. In een andere repository wordt gebruik gemaakt van deze uclibc. Als je daar dan een package uit hebt...
welke repository gebruik je om je packages te installeren? Maw, wat is je inhoud van /opt/etc/ipkg.conf?
Xinetd hoort gewoon actief te blijven. Alleen de services die eronder hangen niet, maar die zie je ook niet al proces.
Webserver heeft een eigen proces, die hangt niet onder xinetd.
xinetd...
I have a HP deskjet 840c, copy text to /dev/usb/lp0 works for me here.
Ik bedoelde eigenlijk de output van ps ipv top maar goed.
Ik draai mijn router in AP mode, dus ik heb geen firewall. Nooit geconfigureerd ook, dus daar kan ik je niet mee helpen. Ik neem echter aan...
what about
echo "test" >> /dev/usb/lp0
Ik ken filezilla niet, maar ik ben nog geen ftp proggies tegengekomen waarbij je de poort moet opgeven. Poort 21 is immers zooo standaard.
Heb je dat :21 al eens weggelaten?
Maar nogmaals, zonder...
Beetje karige hoeveelheid info zo he.
Draait je router als accesspoint? Anders gaat het zeker niet zonder meer werken.
Het wemelt op dit forum echter van de HOWTO's dus met een beetje zoeken...
If you switch from wl500 repository to oleg repository you should install uclibc-opt, because packages can depend on this newer version!
After upgrading you should re-install all packages which...
Indien je thttpd gebruikt kan je eens proberen om de index.html juist weg te doen. Volgens mij genereert thttpd zelf een pagina als je naar een bestaande directory zonder index.html browsed. En dan...
Motion can be configured with webinterface, go to http://router-ipadress:8080
...and true, motion has lots of options to configure. Maybe it helps to search also on other linux forums, there's not...