I've tried the new 1.8.1.3 firmware on my asus wl300g, with exact the same settings, and now it works at normal speeds (I can get up to 2 mbyte/second).
I could not get the ethernet bridge option to...
Type: Posts; User: Aldert1
I've tried the new 1.8.1.3 firmware on my asus wl300g, with exact the same settings, and now it works at normal speeds (I can get up to 2 mbyte/second).
I could not get the ethernet bridge option to...
hmm I did not know that, thanks. There's no workaround for that? perhaps putting the WL300g in client mode or something?
Hi all,
I've setup my WL500g and WL300g to do WDS with eachother (hybrid mode, 128 bit WEP) but it seems rather slow, average connection speed is around 200 kbyte/second when I send something over...
just login with admin/admin via ftp. it should work.
set or get the txpwr:
go to http://ipadressofwl300g/Main_AdmStatus_Content.asp
login
type wl txpwr and press refresh (don't hit enter)
It seems that I made a booboo. After fixing the speed issue (switching off autosensing etc) I still had problems.. here's why:
I left the dhcp client running on my SMC adsl modem (in bridge modus)...
see my last message at http://wl500g.info/showthread.php?t=437
I'm also sending it back. I don't want to be bothered with crappy hardware
edit: I made a booboo, I'm not sending it back afterall,...
I still see the problem with the 1.6 version, although less severe (I even have the problem when I put a simple 10mbit hub between the SMC adsl modem and the asus wl-500g, so it's also not the...
It looks like I'm talking to myself ;)
The problem does not occur with the 1.6 firmware from the Asus website, it just keeps chugging along, even if I try to open 900 connections or something. I...
I think I've found the main issue, when something makes a number of connections very quickly, the wan port dies, and then starts working again after 20-40 seconds.
Starting emule is a sure way to...
I've analysed the connection drops and it only happens when there is some traffic on the line. Attached is a picture.
Y axis is the duration of the connection drop (in seconds) and x axis is the...
Yes but you are using ppoe, my smc adsl modem is running in bridge mode. (My adsl connection is not ppoe based but ATM based )
I will put a hub between the connection of the ADSL modem and the...
Hi All,
My Asus WL-500g has a similar problem like the issue previously described in the "wan port dies" thread. After X amount of traffic (or sometimes, just because it feels like it) my Asus...
This is the last update for now, I've added telnetd support (without password)
download at http://server.zomeronline.net/wl300g
Aldert
ps.
I've recompressed all the pictures for the web...
I've built a 1.7.5.6 firmware with ftp server support.
download here:
standard version:
http://server.zomeronline.net/wl300g/ftpserver_WL300g_1.7.5.6_en.trx
and an 84 mW version:...
title says it all. modified the firmware to always output 84 mW.
You might need extra cooling for this.. I've heard about overheated accesspoints.
http://server.zomeronline.net/wl300g/
Your mileage may vary
it works for me but I don't know if it works for you
http://www.faqs.org/docs/jargon/Y/YMMV.html
Hi all,
I compiled the latest firmware for the wl-300g from the sources available on the ASUS site (I didn't make any changes)
The image can be downloaded here:...