Could smdy tell me how can i compile my .c program for wl500gx?
i tried to search, but coldn't find anything.
Printable View
Could smdy tell me how can i compile my .c program for wl500gx?
i tried to search, but coldn't find anything.
I'd also like to build a .c file for my wl-500g and I'm also not sure how to start. But you know that there is a tutorial on how to set up a build environment for the wl-500g(x) at http://www.macsat.com/BuildEnvironment.php? Unfortunatelly, it ends when the interesting part begins and I don't know how to proceed from there.
Maybe by pushing this thread a bit we'll find someone out there who is able to provide some help on this ;-)
The goal of the build environment is to be build ipk packages for the nslu2 and wl500 starting from an opensource software available somewhere on the Net (apache, php, pound, etc...).Quote:
Originally Posted by hejira
If your plan is only to compile and run a few set of .c files you've written, the only things you need is this sub-part of Macsat tutorial (apart of the prerequisites) :Quote:
Originally Posted by hejira
This will install the Asus cross compilation toolchain (a c compiler able to build stuff for broadcom architecture) on your linux machine.Code:mkdir /opt
cd /opt < enter >
wget http://www.asuscom.de/pub/ASUS/wireless/WL-500g-03/GPL_1927.zip < enter >
tar zxf ./GPL_1927.zip < enter >
cp -R /opt/broadcom/opt/brcm /opt < enter >
You will also need Oleg's patched uClibc :
When this two points are done, you're ready to compile your own .c stuff using broadcom c compiler :Code:cd /var/tmp
wget http://oleg.wl500g.info/1.9.2.7-6b/wl500g-1.9.2.7-6b.tar.bz2
tar xjf wl500g-1.9.2.7-6b.tar.bz2
cd wl500g-1.9.2.7-6b
make uClibc
et voila.Code:mipsel-uclibc-gcc -o helloworld helloworld.c
JF
Thanx Very much!
There is no file: http://www.asuscom.de/pub/ASUS/wirel...3/GPL_1927.zip , can somebody sahre it?
GPL source code for firmware version 1.9.5.0, is here:
http://support.asus.de/download/down...Language=en-us
global: http://dlsvr01.asus.com/pub/ASUS/wir...3/GPL_1950.zip
usa: http://dlsvr03.asus.com/pub/ASUS/wir...3/GPL_1950.zip
europe: http://dlsvr02.asus.com/pub/ASUS/wir...3/GPL_1950.zip
beware... it's 170MB...
NOTE: this isn't a zip file... you should rename it to .tar.gz our .tgz and extract it with:
tar -zxvf your_file.tgz
I'll ask you for new tutorial... I dont know how to make it work with new file (some directories are not exist, some are renamed).. Can anybody help me?
1.9.5.0 firmware sources does not contain compiler.
1.9.2.7 does. The actual link is ftp://ftp.asuscom.de/pub/ASUS/wirele...3/GPL_1927.zip
Oleg,
What is your plan for future custom firmware ?
Are you still working on the 1.9.2.7 branch or did you switch to 1.9.5.0 (which seems to support WDS over WPA, my personnal need ;))
JF
JF, I'm now working on 1.9.2.7-6c. Perhaps there would be 1.9.5.0-1 or something, which would be 1.9.2.7 based (but includes 1.9.5.0 fixes), as moving to 1.9.5.0 is a big pain...
JF, actually you should consider switching to OpenWRT, as it has web interface now.
Uhmm... Can you advice a recovery method.. Downloaded it twice, both are damaged +(
Hello,
I'm a new french guy :)
I read these how to (http://www.macsat.com/BuildEnvironment.php) but i the end... it's not working and i don't understand why...
I'm running on a gentoo Box.
I have these message :
utopia unslung # make
make readline-stage ncurses-stage
make[1]: Entering directory `/opt/unslung'
#make <bar>-stage <baz>-stage
rm -rf /opt/unslung/builds/readline-5.0 /opt/unslung/builds/readline
zcat /opt/unslung/downloads/readline-5.0.tar.gz | tar -C /opt/unslung/builds -xvf -
readline-5.0/
readline-5.0/doc/
[Snip]
readline-5.0/histfile.c
readline-5.0/histsearch.c
#cat | patch -d /opt/unslung/builds/readline-5.0 -p1
mv /opt/unslung/builds/readline-5.0 /opt/unslung/builds/readline
(cd /opt/unslung/builds/readline; \
AR=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-ar AS=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-as LD=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-ld NM=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-nm CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc CPP="/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -E" GCC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc CXX=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-g++ RANLIB=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-ranlib STRIP=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-strip \
CPPFLAGS="-O2 -pipe -I/opt/unslung/staging/opt/include " \
LDFLAGS=" -L/opt/unslung/staging/opt/lib -Wl,-rpath,/opt/lib -Wl,-rpath-link,/opt/unslung/staging/opt/lib " \
./configure \
--build=i386-pc-linux-gnu \
--host=mipsel-linux \
--target=mipsel-linux \
--prefix=/opt \
--disable-nls \
--disable-static \
)
checking build system type... i386-pc-linux-gnu
checking host system type... mipsel-unknown-linux-gnu
Beginning configuration for readline-5.0 for mipsel-unknown-linux-gnu
checking whether make sets $(MAKE)... yes
checking for mipsel-linux-gcc... /opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
checking for C compiler default output... configure: error: C compiler cannot create executables
See `config.log' for more details.
make[1]: *** [/opt/unslung/builds/readline/.configured] Erreur 77
make[1]: Leaving directory `/opt/unslung'
make: *** [/opt/unslung/builds/abook/.configured] Erreur 2
Can somebody help me ?
;)
Oh i completly forget to sayed that i have try these : http://wl500g.info/showpost.php?p=22732&postcount=3 and i have these :
utopia wl500g-1.9.2.7-6b # make uClibc
make -C /var/tmp/uClibc all install CROSS=mipsel-linux-
/bin/sh: mipsel-linux-gcc: command not found
/bin/sh: mipsel-linux-gcc: command not found
make[1]: mipsel-linux-gcc : commande introuvable
make[1]: Entering directory `/var/tmp/uClibc'
rm -f include/asm;
The path '/opt/brcm/hndtools-mipsel-linux/mipsel-linux/include/asm' doesn't exist.
I bet you didn't set KERNEL_SOURCE, TARGET_ARCH or UCLIBC_HAS_MMU
correctly when you configured uClibc. Please fix these settings.
make[1]: *** [headers] Erreur 1
make[1]: Leaving directory `/var/tmp/uClibc'
make: *** [uClibc] Erreur 2
The message are clear but i do exactly what they said in the How to...
In the repertory /opt/brcm/ i have
utopia wl500g-1.9.2.7-6b # ls -R /opt/brcm/hndtools-mipsel-linux/include/
/opt/brcm/hndtools-mipsel-linux/include/:
c++
/opt/brcm/hndtools-mipsel-linux/include/c++:
3.2.3
/opt/brcm/hndtools-mipsel-linux/include/c++/3.2.3:
algorithm cfloat csignal cwchar fstream iterator new stdexcept
backward ciso646 cstdarg cwctype functional limits numeric streambuf
bits climits cstddef cxxabi.h iomanip list ostream string
bitset clocale cstdio deque ios locale queue typeinfo
cassert cmath cstdlib exception iosfwd map set utility
cctype complex cstring exception_defines.h iostream memory sstream valarray
cerrno csetjmp ctime ext istream mipsel-linux stack vector
/opt/brcm/hndtools-mipsel-linux/include/c++/3.2.3/backward:
algobase.h complex.h hash_map.h iostream.h multimap.h queue.h streambuf.h tree.h
algo.h defalloc.h hash_set.h istream.h multiset.h rope.h stream.h vector.h
alloc.h deque.h hashtable.h iterator.h new.h set.h strstream
backward_warning.h fstream.h heap.h list.h ostream.h slist.h strstream.h
bvector.h function.h iomanip.h map.h pair.h stack.h tempbuf.h
Nothing about C or ASM just for c++... :(
Well, DID you have a log at the config.log file? There you should probably be able to see what the error was yourself. I had a similar problem recently where I had bogus CFLAGS parameters that I had to get rid of first.Quote:
Originally Posted by zork
Hi Jean,
I am trying to compile helloworld.c just to learn how it works.
My hardware is WL-500gP V2, I installed Koppel firmware to get my cellular modem connected.
Aus server is temporary down.
As your HowTo is already some years old, please tell me if the GPL sources are still valid version for my router running today Koppel .
If not, what GPL sources should I select and from what place ?
greetings,
Happy New Year
Darius
BTW I will try to compile Linux Dialog for running my basic shell scripts.