You were right. I killed Samba and the usage of memory stayed on 33 mb.
Now I only run Samba when needed and start it with Xinetd.
Like this: http://wl500g.info/showpost.php?p=60936&postcount=7
Printable View
You were right. I killed Samba and the usage of memory stayed on 33 mb.
Now I only run Samba when needed and start it with Xinetd.
Like this: http://wl500g.info/showpost.php?p=60936&postcount=7
Good idea, but transfers might be a bit slower:)
read some explenation here: http://us.generation-nt.com/memory-e...195739711.html
also these pages: http://www.linuxinsight.com/proc_sys_vm_hierarchy.html
especially this one: http://www.linuxinsight.com/proc_sys...op_caches.html
are quite usefull for cleaning the ram :)
Hi guys! It's been almost a year since my last visit but you know... I had a perfect asus WL-500GP v2 with Oleg's fw and I was happy all the time :) Yesterday I've bought an RT-N16 and the problems, unfortunately, begun.
As you all know the Asus FW sucks, so I tried Olegs and ddWRT to test if I get better performance, since I have 1 media centers (cat5), 5 laptops (wifi), 3 smartphones (wifi) and a homeserver (cat55), all connected to de RT-N16.
Strangely I got no wifi neither with oleg's neither with ddwrt unless I put them exclusively on channel 1. I don't get it, how is this happening? Can you help me?
I use open system security with mac address access restriction.
Thank you very much and sorry for my English.
Interesting: (https://dev.openwrt.org/ticket/6580)
"Would be nice. I have not seen any info if bcm4718 is supported by b43, and I don't know if the proprietary Broadcom driver works with newer 2.6 kernels. Currently the 2.6 builds available (dd-wrt, Tomato, stock) use kernel versions around 2.6.22-24 and the proprietary Broadcom driver. OpenWrt trunk currently uses 2.6.3x kernels."
As you can dig from OpenWRT svn, they receive contribution with partial sources of broadcom driver 5.10.56.27 for MIPS.
It use in our firmware requires deep tests, since we hasn't any knowledge about binary part of it. After this, we should try to port Broadcom SDK to newer kernel. It is large task too...
In that case you can try those:
1. Load default settings /reset on the fw you are using.
2. Check if you wifi is working after loading defaults, before you costumize any setting.
3. Try to connect to the router in other computer, and see if the same problem is happening.
Can anyone tell-me if jdownloader (http://jdownloader.org/download/index) work in this router ?
Hello
My old wl500gp(oleg firmware) I can use usb sound stick with build in driver(soundcore.o and audio.o) and play music with madplay.
Now I turn to rt-n16(oleg firmware), but I can't find audio driver. Can I use usb sound stick to play sound on rt-n16?
Thanks,
Great to hear. I've upgraded to the latest version, loaded modules but need to test it out with some player when at home. Thanks.
Is there anyone to help me understand how to make bluetooth work (i.e. how to add/build necessary modules e.g. bluez.ko)?
EDIT: OK, probably not that easy, as I imagined - obviously :) so if you are not aware of easy solution just ignore my question
Very thanks wpte, I loaded latest rt-n16 firmware and modules from your site. :D
I never test this soundcard with pc, but this soundcard work very well with wl-500gp(oleg firmware+soundcore.o+audio.o+madplay+default volume+earphone) and no noise came out.
I played sound on rt-n16 with same environment(different only driver modules).
I tryed low volume, but noise still come out.