Please help on telnet with custom firmware

Hello,

First of all I not too familiar with Linux.

I did the custom firmware upgrade according the instruction and it worked well. My goal was the HDD spin down and it worked.
A week later the main power went out for while. I had to reconfigure the router completly because it forget all the settings. I guess it reloaded the factory default firmware.

When I reset everything it seems work fine except the HDD spin down.

I started to flash the custom SW again. When I try to telnet to move the rc.local etc. I refsused by the system. I get a fault message telling me I can't connect on port 23 (this was a free translation from my local language).

I could not solve this. I did everithing until this step several time in different way. The result is the same.

Please help.

Best regards, Csiga

Try this thread: http://wl500g.info/showthread.php?t=7434

It explains a couple of options.

Hacksaw.

Thanks a lot Hacksaw! I will try.
I read this thread before I just not connect it to my problem.
Best regards, Csiga

I confirme it helped.
Thanks a lot once more.

Best regards, Csiga