Firmware to use wl300g as client
Hi,
I just got a new ap (belkin pre-n) an i want to use my old ASUS WL300g as a client i the wifi network. (Insted of bying a wifi game adaptor). Is there any firmware that supports this on wl300g? Also I wounder if it is possible to use a wl500g firmware or if that would turn my wl300g into a brick?
Have done some more testing now.
Currently using fw WL300g-1.9.2.7-4.trx (Saw that you released WL300g-1.9.2.7-5.trx but have not flashed it yet).
I was able to do the following:
1. Open system is working - Router joins the "MyWifiNet" automaticly on boot.
2. WEP 64bit is working - Router joins the "MyWifiNet" automaticly on boot.
3. WEP 128bit is working - Router joins the "MyWifiNet" automaticly on boot.
4. WPA-PSK partualy working - Router logg is saying connecting to MyWifiNet on boot but nerver succeds in joining after boot. If i telnet to the router an write the following command
Code:
wl join "MyWifiNet" imode bss amode wpapsk
it joins correctly and everything works fine. I can do with this but my girlfriend is not telnet friendly so I need to fix this. She keeps nagging. I never shutoff the router an it only seems to need a reboot when I'm not at home. Any suggestions?
this is my set up
[xbox] <-x-> <[ASUSWL300G]> <<<wifi>>> <[BelkinPRE-N]> <---> {internet}