I know but default power is 9 mw i can speed up to 12mw but i need minimum 40 mw and i need some firmware to do this.
Printable View
I know but default power is 9 mw i can speed up to 12mw but i need minimum 40 mw and i need some firmware to do this.
www.dd-wrt.com
to enable usb in dd-wrt or in the default firmware?
In the dd-wrt i compiled the modules for it so if u need it i can send them to you ;)
For the default firmware, make sure the usb disk /stick has standard partions (i had 1 with 4 partitions and didn't recognised my stick , so i had to make a single partion and was working ok).
dear florin, i'm highly interested in your compiled version. do you need an email / ftp address to send it to or can you give me some coordinates?
btw, two more questions:
- were you able to make downloadmanager work
- what is the max radio power you can set in your firmware? (see http://wl500g.info/showthread.php?t=5319)
edit: that's subjective, how many Mbytes/sec reading/writing to disk?Quote:
Originally Posted by grongl
So only 14Megs? :(Quote:
----------------
MEMINFO
total: used: free: shared: buffers: cached:
Mem: 14651392 13529088 1122304 0 749568 4759552
After runningin the console, theCode:wl txpwr1 -m 150 -o
returnsCode:/usr/sbin/wl txpwr
Web interface still shows 12mw though.Code:pwr in mw 87
pwr in mw after override adj 87
150
In OpenWrt you can set the power output using the nvram variable "pa0maxpwr" ... the wl command for some reason did never do the trick (means no change in signal strength whatever value you set ).
I have try to extract the Image for WL-500g Premium:
# wlextract WL500gp_1.9.6.8_TW.trx
# dd if=WL500gp_1.9.6.8_TW.trx of=kernel.gz skip=28 bs=1 count=765205
the dd is needed because the wlextrace give you a too short file (1 Byte to small)
# mkdir root_fs
# uncramfs root_fs rootfs :D
and create a new cramfs Image:
# mkcramfs root_fs root_fs.cramfs
# cat root_fs.cramfs trailer > root_fs-and-trailer
ok that works fine but when i try to create the trx Image i get this warning:
# trx -o my_firmware_wl500gp.trx kernel.gz root_fs-and-trailer
warning: increasing offset 765233 to 765236 :confused:
and the extract of this new firmware gives a kernel image with 765208 bytes instead of 765204 or 765205
# wlextract my_firmware_wl500gp.trx
# ls -l kernel.gz
-rw-r--r-- 1 root root 765208 May 29 17:59 kernel.gz
Have somebody try this with success???
Tomek
Could anybody port the daemon for the downloadmanager for each WL-500g ?
Would be a very nice feature ...