wlan "enable radio" ... problems with telnet ... any chance for ssh server on wlhdd
Hi :-)
I like my wl-hdd ... now (since 1.2.3) it is possible to switch off wlan *very-happy-now*
Or am I wrong? This Option in WL-HH Configure / Wireless / Advanced / Enable Radio? ... this option was added in Firmware V1.2.3 ... after upgrading FW and resetting to fatory defaults, nothing in selected yes neither no ... so I switched to no ... wlan led goes of after restart ... but after more configurations ... it switches on again :-(
but I have trouble to telnet to wl-hdd ...
---------------
linuxnote1:/home/mazi1802 # telnet 192.168.0.100
Trying 192.168.0.100...
telnet: connect to address 192.168.0.100: Connection refused
---------------
- any chance for a ssh server on wl-hdd?
- How to get the nfs server to my wl-hdd working? seen this howto for FW 1.2.8?
Thanks
Martin
Get it working even better?
I have installed firmware 1.2.3.0, added your "Linux Distribution" and init.sh as the startup script. THANKS!!! Everyting is working. I can record flwlessly from my DBOX about 80% of the time, 90% if I turn off "record all audiopids".
Any chance I can reach 100% ? :-),
Ive modified the init-script a little, I dont need Wlan and USB:
Thanks 1000 Times
:)
logos999
#!/bin/sh
ifconfig eth0 down
ifconfig eth2 down
ifconfig eth1 10.0.1.220 netmask 255.0.0.0
cd /tmp/harddisk/part1/conf/bin
# start Samba 3.0.9 daemon
killall -9 nmbd
killall -9 smbd
./nmbd -s /tmp/harddisk/part1/conf/usr/local/samba/lib/smb.conf -D
./smbd -s /tmp/harddisk/part1/conf/usr/local/samba/lib/smb.conf -D
/tmp/harddisk/part1/conf/bin/telnetd -d -l /tmp/harddisk/part1/conf/bin/mysh
mount -o bind /tmp/harddisk/part1/conf/etc/ /etc
# start userspace NFSv3 daemon
mkdir /tmp/harddisk/part1/conf/var/lib
mkdir /tmp/harddisk/part1/conf/var/lib/nfs
cp /tmp/harddisk/part1/conf/etc/exports /tmp/harddisk/part1/conf/var/lib/nfs/etab
./portmap
./mountd
./unfsd
# start FTP daemon
killall -9 stupid-ftpd
#./vsftpd &