Hello,
I'm new in this land, but i want to question if someone nows if exist any firmware with CDMA to ASUS WL-500gP, and where I can find it.
Thanks,
JF
Printable View
Hello,
I'm new in this land, but i want to question if someone nows if exist any firmware with CDMA to ASUS WL-500gP, and where I can find it.
Thanks,
JF
Hi, I am using the ASUS WL-500gP ith the firmware I found at this site:
http://koppel.cz/cdmawifi/download/162/
and it works perfectly with my CDMA USB modem.
The firmware is in english, but since the site is in Check and I dont understand
this language it was kind of trial and error.
Bur so far so good.
Mektub
WL500gp-1.9.2.7-7f-pre5-CDMA-1.62.trx work well for me too, but this firmware are secure? I don't want my wl-500gp dead.. :p
And with the problem about the range of 500gP? my 500g have more that twice range that 500gP.
And in the box say it more that 300% range..
This cdma fw have some bugs that it need to be fixed :)
I can't use Dynamic DNS Say:
It seems easy to solve..Code:ddns update: could not resolve ip address for vlan1.
Hello, I want to buy a 3G USB Modem to have internet everywhere but when I am at home I have another computers and I want to share my connection without having one computer turned on to share the internet! I looked for intensively in the Internet and finnaly I found one router called Asus WL-500g deluxe with 2 Usb Ports that works with one ISP from Portugal called ZAPP, so my awnser is if this works with the Vodafone USB 3G Connection Box.
Here you have a photo of it.
http://www.trustedreviews.com/images...ine/3719-2.jpg
Hope you can help me!
Thanks!
Yes, the Asus WL500g Deluxe works with that dongle (I'm assuming you are talking about the Huawei E220 - a.k.a. Vodafone SmartModem). But it doesn't work out of the box, you need to load the usbserial module manually (or in /usr/local/sbin/post-boot) and configure the dialup settings. Other than that it works (don't expect HSDPA speeds though, that won't happen until someone recompiles the usbserial module for the WL500g with the extensions suggested at http://www.junxion.com/opensource/li...usbserial.html - there's another thread I opened on the subject earlier).
Razvan
Try this http://koppel.cz/cdmawifi/download.
That's the one I'm using and it doesn't help much. The USB Serial module is still the same slow one, they're using the acm module for the EVDO modems. I'm in Romania and we have a CDMA 450 EVDO network here so I was able to test. You still need to insert the module manually and you still get slow speeds.
A new release with the last and final firmware of OLEG, and with the bugs I reported fixed.
http://koppel.cz/cdmawifi/download/163/
The changes 1.62 to 1.63:
Quote:
1.63
* priprava uzivatelskych scriptu v /usr/local/sbin
* moznost zadani username/password/apn pro IP Wireless (T-Mobile 4G)
* podpora GPRS/EDGE/UMTS/HSDPA modemů Zadacom 2G a 3G+
* opravy spravy DNS v zalohovanem spojeni
* funkcni DDNS (dyndns) pro vytacena spojeni se zjistovanim skutecne vnejsi ip adresy
* Changes of OLEG:
* Switched to Busybox 1.1.3
* VT6212 USB 2.0 patch (10-15% speedup)
* USB sticks without MBR should be also now mounted
* Storage devices are using async options by default
* WL500g Premium support (MirrorBit Flash support, nvram validation, 32mb enabled) !!! The firmware is totally different from the stock one: no DM, different FTP server and Samba! Do not flash if in doubt - you would miss some features !!!
* Additional pppd options field is now 255 chars long
* PPP now defaults to unlimited number of connection attempts
* PPTP connections now use MTU 1400 by default
* DHCP+PPTP (0.0.0.0 gateway support in the MAN routes, DNS and default gateway options now could be acquired from DHCP too, symbolic PPTP name support, PPTP client now adds route to the server)
* Fixed MAN->LAN firewall issue (be sure to enable WAN to LAN filter and set default action to DROP!)
* Fixed some firewall defaults (WAN->LAN is now enabled and DROPs)
* "Apply to routing table" option is now in effect
* Default gateway is no longer appears in the nameserver list in the AP mode
* SIGALRM is no longer blocked in the post-mount
* Minor bugs...
Hi Mektub,
May i know what CDMA Modem do you use with WL-500gP ?
Thank you ..
The modem comes in a pack when you subscribe to ZAPP, a company that operates in Portugal and several other countries. They call it Z010, but I think it is a 'Qualcomm CDMA Technologies MSM'.
They now deliver another modem called Z020 but I suppose those are internal names from Zapp.
They look like this:
I use the same modem Z010 from Zapp Portugal.
Quote:
--Usb Adaptor--
P: Vendor=05c6 ProdID=3196 Rev= 0.00
S: Manufacturer=Qualcomm, Incorporated
S: Product=Qualcomm CDMA Technologies MSM
-------
Firmware : AA3.3.30 NM20RM3026 ^A
Power state : 85% (battery)
Signal : -0dB
Hybrid mode : CDMA+HDR
---=== Details ===---
Software Version : NM20RM3026A
Compile Date : r 12 20051
Compile Time : :14:29*
Station Class Mark : 0x06
Mobile CAI Revision : 0x5F
Mobile Model : 0x04
Firmware Revision : 0x0102
Slot Cycle Index : 0x00
Demodulator ID : 0x0100
Decoder ID : 0x00
Interleaver ID : 0x6B
Rx Automatic Gain Control : 0x
Tx Automatic Gain Control : 0x
Tx Gain Adjust : 0x
Pilot Strength (Ec/Io) : 0x
Current Sleep Signal : 0x
PN Offset Array :
HDR Connection : ???