I've no idea. It's like a puzzle. :DQuote:
Originally Posted by cZip
Printable View
I've no idea. It's like a puzzle. :DQuote:
Originally Posted by cZip
I tried to compile your firmware but it cannot find the 'addver' command. This is neither available in the custom firmware tree nor on my system (Debian GNU/Linux testing).
Could you please tell me what 'addver' is?
Thank you,
Werner
This program should be in the ASUS GPL sources. Is it missing?
I'm attaching it just in case.
Firmware v.1.9.2.7 CR1 [Oleg]
I have got a problem with my wireless connection.
It gets disconnected every short while.
The wireless computer got a static ip.
This is som of the output from the syslog.
Dec 22 17:00:21 udhcpc[127]: Sending renew...
Dec 22 17:00:21 udhcpc[127]: Lease of 10.0.0.2 obtained, lease time 7200
Dec 22 17:00:22 dnsmasq[71]: read /etc/hosts - 5 addresses
Dec 22 17:00:22 dnsmasq[71]: read /etc/ethers - 4 addresses
Dec 22 17:00:22 dnsmasq[71]: reading /tmp/resolv.conf
Dec 22 17:00:22 dnsmasq[71]: using nameserver 10.0.0.138#53
Dec 22 17:00:22 dhcp client: renew IP : 10.0.0.2 from 10.0.0.138
Dec 22 16:05:28 dnsmasq[71]: DHCPREQUEST(br0) 192.168.1.5 xx:xx:xx:xx:xx:xx
Dec 22 16:05:28 dnsmasq[71]: DHCPACK(br0) 192.168.1.5 xx:xx:xx:xx:xx:xx blade
Dec 22 16:05:38 dnsmasq[71]: DHCPREQUEST(br0) 192.168.1.5 xx:xx:xx:xx:xx:xx
Dec 22 16:05:38 dnsmasq[71]: DHCPACK(br0) 192.168.1.5 xx:xx:xx:xx:xx:xx blade
Dec 22 16:05:41 dnsmasq[71]: DHCPREQUEST(br0) 192.168.1.5 xx:xx:xx:xx:xx:xx
Dec 22 16:06:13 dnsmasq[71]: DHCPDISCOVER(br0) 192.168.1.5 xx:xx:xx:xx:xx:xx
Dec 22 16:06:13 dnsmasq[71]: DHCPOFFER(br0) 192.168.1.5 xx:xx:xx:xx:xx:xx
This keeps repeating it selfs.
Any clues what's wrong ?
Nothing wrong with wl500g. It just issues IP address in request for it.Quote:
Originally Posted by Phantome
Probably windows wireless problems, wpa or something...
:rolleyes: Sorry about that, something is disturbing the signal, changed the channel and everything is ok for now. Even the speed changed from 150kbyte/s to 2500kbyte/s :)
Thank you very much! It is in the 1817 GPL sources, but it is missing in 1927.Quote:
Originally Posted by Oleg
Werner
Hello
I now that this is a silly question, but I've just updated from ASUS 1.9.2.7 to
Firmware v.1.9.2.7 CR1 [Oleg]
and which username and password should I use to telnet the router ?
thanx
same as used by webinterface.
the webinterface as no user... only password
That means that you didn't upgrade to 1.9.2.7 properly.Quote:
Originally Posted by cardoso
Push the reset button on the back of the router for at least 10 seconds while power is applied. That resets your router to its default factory settings. After that you'll have logon with default username/password and reconfigure your router. Then your router is correctly upgraded.
You can login to telnet with the same username/password as the webinterface.
I'm also suggesting to reset to defaults. Empty user name indicates, that you've upgraded from older (pre 1.8.x.x firmware) and has not reseted to defaults. This could cause problems, due to the fact, that firmware is seriously changed and some of the options supported earlier could cause problems with new firmware. BTW, it's still possible to telnet to your router - firmware defaults to root if username is empty.
Hello people!!
Add Portugal to the Time Zone! :(
Portugal are like (GMT) England !
thks for this forum :)
Merry Christmas and good programing!
on 1.9.2.7-1 (2004-12-17) not work WPA in WDS
on 1.8.1.7-3 (2004-11-15) work fine
You need to specify WPA mode, which you are trying to use. There was already reported, that TKIP+AES does not work. Unfortunatly, this code could not be fixed, due to the fact that it's binary only, so I'm suggesting you to use 1.8.1.7-3 or 1.8.1.9.Quote:
Originally Posted by Viper_Rus