1 Attachment(s)
[Howto] Install recent version of Transmission for Oleg firmware
If you've installed the image kindly created by raas directly or indirectly using my tutorial you may have noticed that the Transmission version is quite old by now and the latest one has to be installed differently.
This tutorial helps you in that. In fact it's sufficient to run only a script that does everything for you:
Code:
#!/bin/sh
#written by ecaddict, distributed (conveyed) under GPL version 3 or any later version
BASE="/mnt/protected/Downloaders/Transmission"
CONFD="/opt/etc/transmission"
CONFF="${CONFD}/settings.json"
INITF="/opt/etc/init.d/S60transmission"
EBDIR="`echo ${BASE} | /bin/sed 's#/#\\\\/#g'`"
killall transmission-daemon
ipkg update
ipkg install openssl libcurl libevent zlib transmission
ln -s /opt/share/transmission /mnt/transmission
mkdir -p ${CONFD}
mkdir -p ${BASE}
mkdir -p ${BASE}/done
mkdir -p ${BASE}/work
mkdir -p ${BASE}/source
#check https://trac.transmissionbt.com/wiki/EditConfigFiles for config options
cat > ${CONFF} << __EOF__
{
"alt-speed-enabled": false,
"alt-speed-time-begin": 1080,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": true,
"alt-speed-time-end": 1320,
"alt-speed-up": 100,
"alt-speed-down": 600,
"blocklist-enabled": 1,
"cache-size-mb": 8,
"download-dir": "${EBDIR}\/done",
"incomplete-dir": "${EBDIR}\/work",
"incomplete-dir-enabled": true,
"watch-dir": "${EBDIR}\/source",
"watch-dir-enabled": true,
"encryption": 1,
"max-peers-global": 100,
"peer-port": 65534,
"pex-enabled": 1,
"port-forwarding-enabled": 1,
"rpc-authentication-required": false,
"rpc-password": "",
"rpc-bind-address": "192.168.1.1",
"rpc-port": 9091,
"rpc-url": "/transmission/",
"rpc-username": "",
"rpc-whitelist": "127.0.0.1,192.168.1.*",
"rpc-whitelist-enabled": false,
"speed-limit-down": 1200,
"speed-limit-down-enabled": true,
"speed-limit-up": 200,
"speed-limit-up-enabled": true,
"ratio-limit" : 5,
"ratio-limit-enabled": true
}
__EOF__
cat > ${INITF} << __EOF__
#!/bin/sh
#written by ecaddict, distributed (conveyed) under GPL version 3 or any later version
CONFD=${CONFD}
CONFF=\${CONFD}/settings.json
OPTIONS="-g \${CONFD} -e /opt/var/log/transmission"
NAME=transmission
EXEC=/opt/bin/\${NAME}-daemon
checkcnfg() {
if ! [ -x "\${EXEC}" ]; then
echo \${NAME} "\${EXEC} not found."
exit 1
fi
if ! [ -r "\${CONFF}" ] ; then
echo "\${NAME} cannot find readable config \${CONFF}"
exit 2
fi
}
d_start() {
checkcnfg
export TRANSMISSION_WEB_HOME='/opt/share/transmission/web/'
\${EXEC} \${OPTIONS}
}
d_stop() {
killall transmission-daemon
}
case "\$1" in
start)
echo "Starting \$NAME"
d_start
echo "."
;;
stop)
echo "Stopping \$NAME"
d_stop
echo "."
;;
restart|force-reload)
echo "Restarting \$NAME"
d_stop
sleep 2
d_start
echo "."
;;
*)
echo "Usage: \$0 {start|stop|restart|force-reload}" >&2
exit 3
;;
esac
exit 0
__EOF__
chmod u+x ${INITF}
cd /opt/etc/lighttpd/ && [ ! -f lighttpd.conf.old ] && cp lighttpd.conf lighttpd.conf.old
sed -i 's/^#\(.*"mod_rewrite",\).*/\1/' lighttpd.conf
if [ -z "`sed -n 's/\/transmission\/rpc/&/p' lighttpd.conf`" ]; then
cat >> lighttpd.conf << __EOF__
url.rewrite-once += ( "^/transmission[/]?\$" => "/transmission/web" )
\$HTTP["url"] =~ "^/transmission/rpc" {
proxy.server = (
"" => (
(
"host" => "192.168.1.1",
"port" => 9091
)
)
)
}
__EOF__
fi
/opt/etc/init.d/S80lighttpd restart
/opt/etc/init.d/S60transmission start
ps afx | grep transmission-daemon
So what does it do?
Creates the Transmission config file:
/opt/etc/transmission/settings.json
Creates the starter script:
/opt/etc/init.d/S60transmission
It also creates couple of directories in /mnt/protected/Downloaders/Transmission/ (should they not exist already).
It also has to modify the lighttpd.conf file as it probably does not have the mod_rewrite module enabled and for almost sure it's missing the proxy function for transmission port (9091), which is required if you'd like to access it remotely via lighttpd (like I prefer via https instead of opening 9091 port on the firewall) .
Don't worry, the old version is saved during the first run as /opt/etc/lighttpd/lighttpd.conf.old should anything go wrong.
The script also restarts lighttpd and starts transmission.
If everything goes fine you can access it from LAN via:
http://192.168.1.1:9091
or
https://192.168.1.1/transmission/
or whatever port and transport you use with your web server.
From internet you can access it either via VPN (if you've installed it) the same way or using your public (WAN) IP address and https.
The configuration file contains reasonable parameters (like lowering the bandwidth used during the evening where usually traffic peaks so being nice with others) and watch directory etc.
If you feel, however you can adjust it based on the following link:
https://trac.transmissionbt.com/wiki/EditConfigFiles
or using the GUIs.
If you change the settings.json file directly don't forget to stop Tranmission before saving it as when Transmission exits it overwrites the config file.
While the built in web interface of Transmission is nice it's certainly lacking compared to Transmission remote GUI (not to talk about ruTorrent what I prefer with rtorrent) so you may prefer installing the Transmission remote GUI on your PC/laptop:
http://code.google.com/p/transmisson-remote-gui/
All you need to do is set 192.168.1.1 and 9091 as port in the connection options.
One thing I particularly don't like about transmission that it stores the torrents in the subdirectory of the configuration directory, which is /opt/etc/transmission/torrents
In my view the best would be somewhere in /mnt/protected/Downloaders/Transmission/torrents so you may remove the torrents directory from /opt/etc/transmission/ and add a link instead to /mnt/...
The install script is also uploaded here: Attachment 8276
So if you're really lazy you can install it single line (copy to PuTTY) or whatever terminal client you use:
Code:
cd /tmp && wget -O install.tar.gz "http://wl500g.info/attachment.php?attachmentid=8276&d=1316097791" && tar xvzf install.tar.gz && ./install.sh
After successful install don't forget to remove the old transmissiond with ipkg remove transmissiond as it uses quite much memory and precious CPU time. Comment out also from /opt/etc/crontab the transmission_watchdog via inserting # to the beginning of the line.
