Prestigio external usb hdd
Prestigio Don't works
Code:
Host scsi0: usb-storage
Vendor: Prestigio
Product: USB Storage HDD
Serial Number: 7DF88FFFFFFF
Protocol: Transparent SCSI
Transport: Bulk
GUID: 152d233900007df88fffffff
Attached: Yes
Port: 1
Bus: 01:03.2-1
Transcend StoreJet 2.5 works well
Works well
Box: Transcend StoreJet 2.5 (SATA)
Code:
Host scsi1: usb-storage
Vendor: JMicron
Product: StoreJet Transcend
Serial Number: 0D0708925FFF
Protocol: Transparent SCSI
Transport: Bulk
GUID: 152d232900000d0708925fff
Attached: Yes
Port: 1.1
Bus: 01:03.2-1.1
Code:
P: Vendor=152d ProdID=2329 Rev= 0.00
S: Manufacturer=JMicron
S: Product=StoreJet Transcend
Asus WL-500G Premium v2 + Samsung Strory Station 1Tb
WORKING!
Code:
Host scsi0: usb-storage
Vendor: JMicron
Product: Samsung STORY Station
Serial Number: 0000002CE09310500532
Protocol: Transparent SCSI
Transport: Bulk
GUID: 04e85f05002ce09310500532
Attached: Yes
Port: 1.1
Bus: 00:03.1-1.1
Thnks ;) But i'm not understand HowTo find VendorID&ProductID, there is a lot of code :eek:
Code:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.20 ehci_hcd
S: Product=PCI device 14e4:471a
S: SerialNumber=00:03.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0424 ProdID=2502 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04e8 ProdID=5f05 Rev= 0.00
S: Manufacturer=JMicron
S: Product=Samsung STORY Station
S: SerialNumber=0000002CE09310500532
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=b8003000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Stoppin your hard drive motor on latest firmware.
Hy , i have a question for you guys:
How can i stop my HDD from spinning when i don't need it ?
I read this post: http://wl500g.info/showthread.php?t=7836&page=5 and i tryied xander solution:
Quote:
Here's the possible solution:
1. Download
http://oleg.wl500g.info/bin/scsi-stop - this binary is able to spin-down your disk immediately after execution.
2. Place it somewhere on your router (you should be able to reach it via PATH environment variable) and make it executable.
3. You can use the script I've written which works in background and spins down disk after some period of inactivity:
http://wl500g.info/showpost.php?p=47135&postcount=10
I use it this way (I named the script scsi-stop.sh):
Code:
./scsi-stop.sh /dev/scsi/host0/bus0/target0/lun0/disc &It automatically writes some log messages to scsi-stop.log.
It works for me. You can change it as you wish.
but seems that my hdd doesn't work through scsi mode because i get:
Code:
/dev/scsi/host0/bus0/target0/lun0/disc: No such file or directory
and when i try the path that i think is correct ( newbie, i know )
Code:
[admin@RouterASSUS work]$ scsi-stop /dev/discs/disca/disc
i get:
Code:
/dev/discs/disca/disc is not a SCSI block device
I have latest 1.9.2.7-rtn-r3497 firmware from http://wl500g.googlecode.com/, and installed by wengi tutorial from: http://wl500g.info/showthread.php?t=10307 (with disca changes of course)
Can anybody help ? Thank you !