Nylon socks server compiled and working
Hi all,
I've compiled the nylon socks server in order to run it on wl500g.
Here is the wiki page : http://wiki.wl500g.info/index.php/PackageNylon
Jean-Fabrice
BTW : as English is not my mother tongue, maybe this wiki page needs gramatical corrections. Sorry.
Can't get nylon to work..
Hi, I'm trying to set up nylon to run on my asus (fw 1.9.2.7-3b) which is located behind a ADSL modem from my ISP.
So downloaded and unpacked the tar on my USB stick. I made a nylon.conf file:
Code:
#Settings
[General]
# number of simultaneous connections allowed
No-Simultaneous-Conn=1
# log connections and other information to syslog? 1: on, 0: off
Log=1
# be verbose on the console? 1: on, 0: off
Verbose=1
# store pid file
PIDfile=/tmp/harddisk/nylon/nylon.pid
# server settings
[Server]
# interface to listen to connections
Binding-Interface=br0
# interface to bind outgoing connections to
Connecting-Interface=eth1
# listening port to bind to
Port=1080
# allowed is processed first, then deny
# allowable connect ips/ranges
Allow-IP=192.168.100.0/24
# denied connect ips/ranges
#Deny-IP=0.0.0.0/0
--------
And run with:
./nylon -c /usr/local/etc/nylon.conf -f -v
On my WinXP client I run FreeCap to forward HTTP to my router port 1080.
The client is on the LAN and the idea is (for testing) to forward from LAN (br0) to WAN (eth1). When I got this up and running I will setup a ssh tunnel.
This results:
Code:
nylon: Client 10.0.0.2 rejected
nylon: (192.168.100.225:3688 <=> my.router:socks) Terminated connection
I then added 10.0.0.0/24 to the allow list and got:
Code:
nylon: Listening on my.router:socks
nylon: connect(): Invalid argument
nylon: Negotiation failed
nylon: (192.168.100.225:3778 <=> my.router:socks) Terminated connection
So what is happening here? Is there something wrong in my config? Or is it my ADSL modem thats messing it all up? Do I have to open up something in iptables?
Any help would be appreciated!
Sjur
Maybe this is not the right place but...
Maybe this is not the right place but...
In fact, to connect from work, I need to go through a first proxy (and firewall that only lets port 80 available).
I would like to know if it is possible to configure MSN or something like that to go through 2 proxies (the first at my work and the other one on the Wl500g@home) !
Thanks for your advices !
Jean-François