Oh darn, I lost my admin password using the 1.9.2.7-9-USB-1.71 firmware. Resetting the router with the reset button does not make the password admin/admin. What to do?
Oh darn, I lost my admin password using the 1.9.2.7-9-USB-1.71 firmware. Resetting the router with the reset button does not make the password admin/admin. What to do?
Try 3x30 method. 1 press and hold reset button for at least 30 sec, 2 unplug the device for at least 30 sec (still holding reset button), 3 plug in the power cord still holding reset button and still at least 30 sec. After this your password should resety to default. Remember you do this still holding down the reset button.
Hi,
Anyone using a Huawei E1750 modem and Koppel image? I've tried to follow the info on Koppel forum, but it just won't work. There's not much help to get on their English forum. :( How can I for instance see that ZeroCd works as expected (where are the logs)?
Regards
Iceman71
Hi,
is it possible to use a E220 attached wl500gp as a remote server?
I want to login, transfer files etc from remote location.
It's probaly up to the provider and public IP address handling?
I'm happily awaiting your expert answers. Thanks.
Yes, it is possible, but it depends to your provider.
When you get an IP from your provider according RFC 1918 http://en.wikipedia.org/wiki/Private_network
or better http://tools.ietf.org/html/rfc1918 it is not possible to get any remote access.
As long as you get a regular IP-address (and not a private one) you can use for instance a dyndns account and remote access.
A very easy way to transfer files is WinSCP.
Have fun
Thanks Newbiefan,
I was able to ping me over the internet.
Can you you please give me a hint whether to use the Oleg implemented dynDNS feature or an available .ipk package?
I am using wl500gp 1.9.2.7-10 Firmware operating as Access Point (dynDNS possible?). I will load WL500gp-1.9.2.7-10-USB-1.71.trx SW for the E220 stick Right?
Thanks again for your support!
You are welcome anytime!
1.) When you are able to ping your ip over the internet: please ensure that you ping really your router and not the gateway of your mobile provider. In case you are not sure, just let me know.
2.) DynDNS: When you use your router as Gateway, you can use build in DynDNS. When using your Asus as Access-point, I would suggest to use DynDNS of your Modem/Router and forward the needed ports to your Asus. This avoids extra installations of optware-ipkg.
3.) Firmware: Of course you can use Koppel USB-1.71 FW and I can confirm that it works stable. But the FW is now a bit outdated, the newest (and merged) FW is here: http://code.google.com/p/wl500g/
Here you can choose between "d" branch with kernel 2.4.37 and "rtn" branch with 2.6.22 Kernel. Hence, I suggest to use the newest FW with 2.6 Kernel. The modem part is well implemented and easy to configure. Further, you can use the same optware (ipkg) repository from here:http://ipkg.nslu2-linux.org/feeds/op.../cross/stable/
4.) And I suggest to install according Wengis howto
If something is unclear, just ask.
Have fun
Newbiefan
1) Ping of IP is ok, because once E220 modem diconnected I get ping timeout.
2) Asus used as AccessPoint with E220 I guess I need inadyn package for dynDNS to work?
3) If I understand correctly I may easily upgrade (currently 2.4 kernel) via Web-Interface my Asus wl500gp to the latest Oleg kernel2.6 FW supporting guided E220 implementation ( APN etc. input via Web-Interface?). Right?
Thanks so much.
Dear Newbiefan,
my original idea is to have DSL WAN and mobile WAN (E220) as backup with wl500gp especially for remote service.
* New FW kernel2.6 is applied, modem E220 data entered.
* have wl500gp working as Access point - no DDNS asus menue available! only in router/gateway mode possible? shall I use inadyn.ipk package?
* how do I connect the E220 to the internet? I tried the Connect button in the asus menue, but no change. Is there an easy way to view/check the assigned mobile IP address?
Please see my settings for USB Network Devices - 3G Modem E220
Is there anything missing or wrong?
Set as WAN Connection Type by default - not checked
Zero CD Configuration - Auto
Rem.: file /usr/local/etc/usb_modeswitch.conf does not exist
Modem type: - ...HSDPA
Username: - ppp@A1plus.at
Password: - ppp
APN: - A1.net
Dial Number (usually *99***1# or *99#): - *99#
Call on Demand No
Idle time before disconnect (sec): 60
MTU 1492
MRU 1492
Autodetect device No
View connected modems
USB device location ID:
Data port:
User interface port:
USB device Vendor ID (0xabcd):
USB device Product ID (0xef01):
USB device serial speed (usually 921600): 921600
Device initial script: at+cgdcont=1,"IP","A1.net"
Additional AT commands:
Additional pppd options:
Failure event script name:
Max number of reconnections (0 for unlimit): 0
Many thanks again for your support!
LOL, well - due to the fact that you are an austrian guy - I'll suggest to support you here: http://www.wl500g.info/showthread.php?t=12583
I bet, it's much easier for us - LOL
My Provider is BOB (for mobile) and I use E200+WL500gP.
can I use huawei E-173 modem on asus wl500w?:) If yes, then tell my how?:) Sorry for my bad english
Use the newest firmware from here: http://code.google.com/p/wl500g/
Then I suggest to follow a linux-guideline for your modem, just ask google.
I'm sorry, I do not own a Huawei E173 Modem, therefore I'm not able to guide you....
hi
i reloaded the firmware 1.9.2.7-10-USB-1.71 on my old Asus WL-500gx, found that my unlocked vodafone USB K3715 which is the OEM of Huawei E180.
Try to choose E220, E630, E169, all of them get out of luck and with this error.
In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
is there anyway to fix? thanks
the usb device log
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.20 ehci_hcd
S: Product=PCI device 1106:3104
S: SerialNumber=01:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1001 Rev= 0.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=120
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=100
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
I would suggest to use the newest available Firmware:
Use the newest firmware from here: http://code.google.com/p/wl500g/
Then I suggest to follow a linux-guideline for your modem, just ask google.
I'm sorry, I do not own a Huawei E180 Modem, therefore I'm not able to guide you....
But the most important is to disable the password request at startup (with windows) of the modem.
Have fun
newbiefan