This is expected behavior in all Oleg firmwares.
modprobe intended to use with modules in /opt/lib/modules/... - i.e. external modules, and requires modules.dep for proper work.
insmod search for modules in /lib/modules/... only.
Printable View
after i run almost all Wengi how-to (at least the parts i needed) i enabled the ftp from web-gui.
I'm using WL500gx-1.9.2.7-d-r381.trx latest.
But the performance of the ftp were very poor - through ssh tunnel.
After i disabled the ftp from web-gui i could not see my usb harddisk.
What could be the cause?
Do I need to restore the defaults and run the how-to again?
thanks.
Thanks for your reply llyI have /opt/lib/modules/2.4.37.2/modules.dep and all the modules. This used to work in earlier versions and 'modprobe nfs' still works OK. I can execute 'modprobe audio' after inserting using insmod and I do not get any errors.
Any ideas what may be doing wrong?
Hello,
I'm getting this messages all the time
What's wrong, where's my mistake. I'm using latest version of wl-500 firmware (WL500gp-1.9.2.7-d-r381)Code:svc: bad direction 1681013353, dropping request
I even don't know in which circumstances this happens on you router, how you achieve it, was this works on alternative firmwares, etc. So I can't help without such information.
Either you should explain problem in detail, or only somebody who use NFS/RPC exactly same as you can help.
P.S. NFS is not enabled by default.
1. Very good indeed! :D
2. Yes, you would think that "reboot" would work from Putty but the problem is when is it not :p I've tried "reboot", rebooting from the webinterface etc. but now I've reseted (by removing the electricity cord) and restored the whole shit. But I'll definitively download the latest compiled version and flash and re-do everything when I find the time =)
Thanks a lot for the answers! :cool:
PS. Love the smileys on this forum
Regarding last issue i've posted here, well it's all gone there's no more such error. But now i've noticed something else, that wasn't there.
Code:Jun 27 12:16:03 smbd[222]: [2009/06/27 12:16:03, 0] lib/util_sock.c:read_socket_data(477)
Jun 27 12:16:03 smbd[222]: read_socket_data: recv failure for 4. Error = No route to host
- "error" from your first post means that something send bad RPC request to NFS server on router, nothing more. I can't imagine what program on which host it can be.
- "error" from your next post means either bad record in routing table or lost link to specific host. This is not a firmware bug too.
Glad to hear this, so i'll try to find whatever causes these errors.
P.S. Is there any thread about using NTFS-3G on oleg's firmware?
So i'll stay with ext3. Thanx lly
Just wondering, is it possible to turn on asynchronous io?
or get it compiled for olegs?
since I believe this means it's turned off?
I guess it might optimize disk speeds a lot:)Quote:
cat /proc/slabinfo | grep kio
kiobuf 0 0 64 0 0 1
and ibm says it's available in patches for 2.4:
http://www.ibm.com/developerworks/li...brary/l-async/
there's no aio support in 2.4 vanila kernel, and the latest andrea's patch is from 05-Oct-2003
http://www.kernel.org/pub/linux/kern.../2.4.23aa1.bz2