Firmware v3.0.2.6 WL500gPV2 (Exclusive release)

Printable View

Show 40 post(s) from this thread on one page

23-07-2008, 13:34
nsec

WOW :D

I like the new web interface. Thanks for the screenshots !
Hope Oleg`s new firmware will have this changes too ;)
24-07-2008, 03:26
Antiloop

Quote:

Originally Posted by Devil-Strike

I have installed the firmware it works but no internet, iti s vlan related, so if some1 can make a good cfg than it works also on v1 version of the router.

Here nvram backup v3.0.2.6 installed on V1

Edit// i have it working on V1, what you need todo is:
1) install oleg or original firmware for v1
2) make backup of config.cfg
3) install v2 firmware 3.0.2.6
4) load config.cfg
5) reboot Router
6) enjoy :D
Use it on your own risk.

Also firmware says that ther is no ethernet connection, but lan and wan works, only need to find out how usb works.
Also if you need to flash back to older firmware on V1 asus restoration wont work, use tftp command or util.

try connecting your WAN cable to LAN4 (they are swapped if I'm correct)

I've tried this firmware on a WL-500w unit, but it didn't bootup at all
menu seems to be pimped up, nothing special if you ask me
24-07-2008, 03:30
Antiloop

Quote:

Originally Posted by darius

Hi,

one short question.
If this new firmware is subject to release and has not been distributed by Asus yet, so what is a way to get it released here ?
Is original firmware by Asus developed by third parties or by Asus itself ?

Darius

I don't know if I understand your question,

but this firmware is developped by Asus, but has not been released to the public yet

meaning I have received this firmware from Asus, with the intention to distribute it among other users at this forum, normally if this happends the firmware will be released in a short time by Asus on their own download pages (now it did not)
24-07-2008, 11:34
Devil-Strike

Quote:

Originally Posted by Antiloop

try connecting your WAN cable to LAN4 (they are swapped if I'm correct)

I've tried this firmware on a WL-500w unit, but it didn't bootup at all
menu seems to be pimped up, nothing special if you ask me

I have tried that, but i get only on wan port a public ip, on lanport4 no ip from my modem.

What i see is that dhcp deamon with standard settings use eth0 and on the v1 it use vlan1.

It runs very stable for a beta also speeds are also perfect, usb works only whene u enable wlan.
25-07-2008, 15:10
Elpibe

Hi,

Has anyone already test this firmware with wl500gp v2 ? I have one gp500 v2 with the version 2.0.1.5.
If i use this new version, it is possible to rollback to another or current version (2.0.1.5) if i dont like it?
Does anyone know if this version works well with the usb disks? For example, to mount an ftp server or to use download master?

Does anyone know if the ddwrt firmware, v24, supports USB on this router? Or know if there is a custom firmware that suports usb?

Thanks
26-07-2008, 07:35
Devil-Strike

Quote:

Originally Posted by Elpibe

Hi,

Has anyone already test this firmware with wl500gp v2 ? I have one gp500 v2 with the version 2.0.1.5.
If i use this new version, it is possible to rollback to another or current version (2.0.1.5) if i dont like it?
Does anyone know if this version works well with the usb disks? For example, to mount an ftp server or to use download master?

Does anyone know if the ddwrt firmware, v24, supports USB on this router? Or know if there is a custom firmware that suports usb?

Thanks

Yes you can always go back to older firmware via webpage update or via tftp.
26-07-2008, 17:53
Elpibe

Thanks for your answer.

I already instaled this firmware, and so far so good, its working very well. If anyone wants that i do some tests please tell me.

Usb works well, ftp, media server, etc... I do this tests with a 4GB usb pen disk.
Download master is ok, but torrents speed are a little slow. In some situations i add the torrent and takes some minutes to start downloading, and sometimes stops the download and stay queued, and then starts again. It needs some improvement.
I dont have time to test FTP/HTTP trought download master, i will test later.
26-07-2008, 17:55
DemonGloom

Please, post /WWW folder here... Or send it to me (demongloom@bk.ru). I'll try to port it for wl-500g Premium v1
26-07-2008, 18:10
Elpibe

You have the download link in the first page.

http://website.wl500g.info/beta/wiza...model=35&id=93
26-07-2008, 18:23
Devil-Strike

Quote:

Originally Posted by DemonGloom

Please, post /WWW folder here... Or send it to me (demongloom@bk.ru). I'll try to port it for wl-500g Premium v1

That, will be nice if you can port it to the v1.
26-07-2008, 19:08
darius

My congratulations.

Nice competition Oleg vs. 100 engineers/developers from ASUS ;)

Quote:

Originally Posted by Antiloop

I don't know if I understand your question,

but this firmware is developped by Asus, but has not been released to the public yet

meaning I have received this firmware from Asus, with the intention to distribute it among other users at this forum, normally if this happends the firmware will be released in a short time by Asus on their own download pages (now it did not)
26-07-2008, 21:09
Elpibe

Do you know if oleg firmware supports usb on the WL500GPv2?
27-07-2008, 06:29
DemonGloom

Yes, It supports.
27-07-2008, 06:44
DemonGloom

Good... I've downloaded this file... But I haven't wl-500gpv2 , only v1... I need not firmware image, but this folder...
29-07-2008, 10:57
Devil-Strike

Quote:

Originally Posted by DemonGloom

Good... I've downloaded this file... But I haven't wl-500gpv2 , only v1... I need not firmware image, but this folder...

I think it is not possible to extract the bin.trx file in linux, we need the Source of it.

Show 40 post(s) from this thread on one page