Sorry for being late.
wengiCode:ipkg install e2fslibs
ipkg install e2fsprogs
Printable View
Sorry for being late.
wengiCode:ipkg install e2fslibs
ipkg install e2fsprogs
If the IPKG samba is installed the smb.conf is located in /opt/etc/samba
Hi,
Thats the reason why i state:wengiQuote:
This chapter is using the original samba of the firmware. If you installed the IPKG samba you will have to change the path /usr/sbin/ to /opt/...
Hi, I'm following your steps and on step 9, i cant seem to make cron appear on the task list... what should i check on slung and post boot and how do i do it? Thanks a lot!
Hey guys,
Just been reading through this quickly and it looks like a great router for a seed box. Just a quick question would i be able to use this as a Wireless Access Point for my TV to view youtube etc, as well as it being connected to a HDD downloading torrents?
Cheers
@jakesully
is /opt/etc/init.d/S10cron executable?
Post the result of "ls -la /opt/etc/init.d/".
@wood88
HDD and downloading torrents is no problem (but these routers are not the fastest ones...)
Wireless AP is a native function for the routers.
If your TV has WLAN and can show youtube videos you are fine with an asus router.
Have a look at the different models for hardware specs.
wengi
Thanks wengi for the quick response.
Any particular model you would suggest that can do the Wireless Access Point & downloading torrents to a usb hdd?
Also i remember seeing a chart saying which modems were compatible with olegs firmware and all there features but i cant seem to find it again, any chance you know where it is?
Cheers
Have a look at
http://code.google.com/p/wl500g/downloads/list
http://code.google.com/p/wl500g/wiki/Devices
The RT-N16 is the newest hardware, but firmware ist still ALPHA.
But i am not the hardware expert so i can not tell you which router to buy.
My WL-HDD is damn old and slow and i never looked for a newer model.
wengi
Hi wengi, thank you for your response. here's the result.
[admin@WL-E0CB4E44260F root]$ ls -la /opt/etc/init.d/
total 16
drwxr-xr-x 2 admin root 4096 Aug 27 23:01 .
drwxr-xr-x 5 admin root 4096 Aug 27 23:01 ..
-rwxr-xr-x 1 admin root 217 Aug 27 23:05 S10cron
-rwxr-xr-x 1 admin root 641 Aug 26 00:24 rc.unslung
Hey wpte,
This sounds like the one i need.
Just a quick question if u dont mind.
Just so i don't waste my money on this as im looking for this particular feature.
I know wengi said the WL-500 could be a wireless access point and download torrents with a connected USB HDD at the same time and obviously being connected only via wireless to the computer, so i dont need to keep my computer on all day/night downloading stuff. Will the RT-N16 be able to do the same thing? (but obviously at faster due to the bigger processor).
Thanks
@jakescully
What happens if you do a "/opt/etc/init.d/S10cron start"?
Error? cron starting?
If cron is started:
Stop it again and try the same with "/opt/etc/init.d/rc.unslung start"
If not:
post result of "cat /opt/etc/init.d/S10cron".
This should show the content of S10cron.
wengi
@wengi,
Thank you very much. I tried doing the steps all over again and it worked this time, now transmission is working. I stopped at step logrotate.
Now my problem is that in a day, the router hangs once or twice a day. Do you think this will be resolved by an additional power source for the HDD?
Here's my setup. Asus wl-520gu, and external HDD - 2.5" IDE 60Gb.