Printable View
Hi
I'm french (scuse for my poor english)
I have a problem with my wireless connection between the wl500g and my centrino notebook.
Even at a distance of 2 meters between my router and my notebook, speed varies from 1 to 54 mb/s (the notebook can be even disconnected sometimes)
Considering the short distance, I think that there is a problem, how to solve it?
hi silver,
i 've got the same problem (see my thread http://wl500g.info/showthread.php?t=4452 !).
which FW are you using? the last Oleg 1.9.2.7-7b?
the last thing i tried is to type in the console:
wl scansupress 1
&
wl intereference 2
do NOT reboot the router, check it with "wl scansuppress" and "wl interference".
for me it seems to work! (at the moment, you never know :o )
MARCO
unfortunately the problem came back!
i really don't know what to do else... :(
MARCO
Did you try wl rssidump? Post here output of this command (RSSI - Receiver Signal Strength Indicator).Quote:
Originally Posted by mako2077
hi snufkin,
i tried "wl rssidump", the result was this:
ACI is Active
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
this is the strenght of the signal!? :confused:
it looks ok, doesn' t it!?
MARCO
Looks very strange :confused:Quote:
Originally Posted by mako2077
Mine shows
In your case ACI is Active, and it needs further investigation.Code:ACI is Inactive
Channel 1 :
Channel 2 :
Channel 3 :
Channel 4 :
Channel 5 :
Channel 6 :
Channel 7 :
Channel 8 : 3 5 4 2 4 4 2 2 3 4 3 3 3 4 3 3 3 3 2 4 2 3 3 3 3 2 2 3 4 2 3 3 3 3 2 3 3 4 3 3 3 3 3 2 3 3 3 3 3 2
Channel 9 : 3 3 3 2 2 2 3 2 2 2 3 1 3 2 2 2 3 3 3 2 3 2 2 3 2 2 3 1 4 3 3 2 3 3 3 3 2 2 2 3 2 4 3 3 2 4 3 2 2 4
Channel 10 : 2 2 3 2 4 3 3 2 2 3 2 1 2 2 2 3 2 3 2 2 3 3 3 2 3 3 3 2 3 3 3 2 2 3 3 3 4 3 2 3 2 2 3 3 3 2 4 3 3 1
Channel 11 :
Channel 12 :
Channel 13 :
maybe this is because i used
"wl interference 2" and "wl scansuppress 1".
switching interference off ( "wl interference 0" ) i get:
Code:ACI is Inactive
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
what do all the 0s mean??
what is ACI? should it be active or inactive???
wl aciargs:
MARCOCode:Glitch count to enter ACI scan mode: 1000
Glitch count to exit ACI mode: 200
Usecs to spin between rssi samples : 10
Interval (in seconds) for ACI scanning in presence of high glitch count: 20
what ever this means, but today i get:
is this now the standard output??Code:ACI is Inactive
Channel 1 :
Channel 2 :
Channel 3 :
Channel 4 : 4 3 3 3 4 2 4 2 2 2 3 3 -20 -20 -18 -20 -18 -20 -18 -21 -19 -20 -19 -20 -18 -20 -20 -19 -20 -19 -20 -19 -20 -18 -20 -18 -20 -20 -20 -18 -20 -20 -20 -19 -20 -19 -20 -19 -21 -18
Channel 5 : 2 3 3 2 2 2 3 3 3 3 2 1 2 2 4 3
Channel 6 : -3
Channel 7 :
Channel 8 :
Channel 9 :
Channel 10 :
Channel 11 :
Channel 12 :
Channel 13 :
well, my wireless is working right now, with my centrino (intel 2200bg minicard inside)!!! speed and everything else seem to be ok.
the strange thing, i really don't know why? i didn't change anything!:cool: (at least i can't remember)
"wl txpwr" --> txpwr is 25
"wl txpwr1" --> TxPower is 56 qdbm, 14.00 dbm, 25 mW Override is Off
"wl rssi" --> eth1: Invalid argument
rssi Get the current RSSI val, for an AP you must specify the mac addr of the STA
nvram show | grep wl -->
(all used keys or phrases are ":-) :-) :-)"Code:wl_radius_port=1812
wl_mode_x=0
wl0_frameburst=off
filter_wl_default_x=ACCEPT
wl_wdsapply_x=0
wl_gmode_protection_x=0
wl0_akm=
wl_maxassoc=128
wl0_phrase_x=
wl_phytypes=
wl0_infra=1
wl0_country_code=DE
wl_infra=1
filter_wl_time_x=00002359
wl_maclist_x=
wl_radio_x=1
wl0_wme_sta_be=15 1023 3 0 0 off
wl_radius_ipaddr=
wl0_gmode_protection_x=0
wl0_ifname=eth1
wl0_wme_sta_bk=15 1023 7 0 0 off
wl_wdsnum_x=0
wl_net_reauth=36000
wl0_mrate=0
wl0_mode=ap
wl0_ap_isolate=0
wl0_radio_x=1
wl_mrate=0
wl_akm=
filter_wl_date_x=1111111
wl0_wme_no_ack=off
wl0_gmode=1
filter_wl_icmp_x=
wl_gmode=1
wl0_dtim=1
wl0_ssid=wlan
wl_wme_sta_vi=7 15 2 6016 3008 off
filter_wl_dstport_x=
fw_wl_enable_x=0
wl0_macnum_x=0
wl_wme_ap_be=15 63 3 0 0 off
wl_plcphdr=long
wl_wme_sta_vo=3 7 2 3264 1504 off
wl_macmode=disabled
wl_wme_ap_bk=15 1023 7 0 0 off
wl0_key1=:-) :-) :-)
wl_phytype=b
wl0_key2=:-) :-) :-)
wl_lazywds=0
wl0_key3=:-) :-) :-)
wl0_wdslist_x=
wl0_key4=:-) :-) :-)
wl_auth_mode=open
wl0_radio_power_x=19
wl_wpa_psk=:-) :-) :-)
filter_wl_num_x=0
wl0_wme_ap_vi=7 15 1 6016 3008 off
wl_mode=ap
wl0_wdsapply_x=0
wl0_closed=0
wl0_plcphdr=long
wl0_rate=0
wl0_macmode=disabled
wl_wpa_gtk_rekey=0
wl0_radioids=BCM2050
wl0_wme_ap_vo=3 7 1 3264 1504 off
wl0_phytype=g
wl0_lazywds=0
filter_wl_dstip_x=
wl0_afterburner=off
wl0_antdiv=-1
wl_chan_list=1 2 3 4 5 6 7 8 9 10 11 12 13
wl_wds_timeout=0
wl0_radio_time_x=00002359
wl0_mode_x=0
wl_ssid=wlan
wl_dtim=1
wl_mode_ex=ap
wl0_wpa_psk= :-) :-) :-)
wl_macapply_x=Both
wl_key1=:-) :-) :-)
wl_key2=:-) :-) :-)
wl0_unit=0
wl_key3=:-) :-) :-)
wl_key4=:-) :-) :-)
wl_country_code=DE
wl_hwaddr=
wl0_net_reauth=36000
wl0_mode_ex=ap
wl0_radio_date_x=1111111
wl0_wds=
filter_wl_proto_x=
wl_rate=0
wl_phrase_x=:-) :-) :-)
wl0_wep_x=0
wl0_radius_port=1812
wl0_wme=off
wl0_auth=0
wl0_radius_ipaddr=
wl0_wme_sta_vi=7 15 2 6016 3008 off
wl_country=
wl_wep_x=1
wl0_wme_sta_vo=3 7 2 3264 1504 off
wl_rateset=default
wl_crypto=aes
wl_radius_key=
wl0_maxassoc=128
wl_unit=0
SystemCmd=wl interference
wl0_phytypes=g
wl0_frag=2346
wl0_wep=enabled
wl0_country=
wl_wdslist_x=
wl_wds=
wl0_rateset=default
wl_wme=off
wl_wme_ap_vi=7 15 1 6016 3008 off
filter_wl_srcip_x=
wl0_wdsnum_x=0
wl_auth=0
wl_wme_ap_vo=3 7 1 3264 1504 off
wl_frameburst=off
wl_macnum_x=0
wl0_macapply_x=Both
wl0_rts=2347
wl_ifname=
wl_wep=disabled
wl0_maclist_x=
wl_gmode_protection=off
wl0_wpa_gtk_rekey=0
wl_radio_time_x=00002359
wl_frag=2346
wl0_key=1
wl_preauth=1
wl_maclist=
filter_wl_srcport_x=
wl_wme_sta_be=15 1023 3 0 0 off
wl_radioids=
wl0_radio=1
wl_corerev=
wl_channel=0
wl0_bcn=100
wl_wme_sta_bk=15 1023 7 0 0 off
wl0_hwaddr=00:15:F2:3D:7A:2C
wl_radio=1
wl_afterburner=off
wl0_preauth=1
wl0_gmode_protection=off
wl_radio_date_x=1111111
wl0_maclist=
wl_rts=2347
wl_ap_isolate=0
wl_wme_no_ack=off
wl0_radius_key=
wl0_wme_ap_be=15 63 3 0 0 off
wl_radio_power_x=25
wl0_corerev=5
wl_key=1
wl0_channel=0
wl0_wds_timeout=0
wl0_wme_ap_bk=15 1023 7 0 0 off
wl0_auth_mode=none
wl_closed=0
wl0_crypto=aes
wl_bcn=100
wl_antdiv=-1
i really don't understand all these variables. sorry. i hope everything is ok now! to be honest i don't trust my system (centrino+wl-500gx+1.9.2.7-7b)... but i'll see, yesterday and today it seemed to be stable. but i already got this feeling once and on the next day nothing worked anymore. maybe now!!:D
a big, big thank to everyone, helping me out! also in the german forum!!!:)
MARCO
My actual firmware is the 1.8.1.7-2a
Upgrade to 1.9.2.7-7b, it should be much stable.Quote:
Originally Posted by silver32
Ok, my routeur is now upgrade with the 1.9.2.7-7b firmware but problems are
still here.
command "wl rssidump" give :
andQuote:
ACI is Inactive
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Quote:
txpwr is 19
Quote:
TxPower is 51 qdbm, 12.75 dbm, 19 mW Override is Off
hi silver32,
today, my wireless died again. i can't use it anymore...
this is very strange, because it worked well the last two weeks! i did not change anything at all! i think there is a big problem of the Oleg FW 1.9.2.7-7b, if there are many other networks around you. today there are 7 other networks around me. i really don't understand!
I AM WAITING FOR A NEW OLEG FW!!!
MARCO
Code:ACI is Inactive
Channel 1 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 2 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 3 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 4 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 5 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 6 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 7 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 8 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 9 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 10 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 11 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 12 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Channel 13 : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
EDIT: now it is working again! with the same output!!!
despite all "0", my wireless connection is degraded but works a little (It seems that the new firmware didn't change anything)
edit, i did a new wl rssidump :
... I don't understand anythingQuote:
ACI is Inactive
Channel 1 : 5 6 6 5 5 5 6 5 6 4 4 4 4 5 5 4 6 5 4 4 4 6 5 5 5 5 6 6 5 3 5 5 5 4 5 5 6 4 4 6 5 6 4 4 3 5 4 4 5 4
Channel 2 : 4 5 6 3 4 5 3 4 5 5 5 6 7 5 5 3 6 4 5 4 4 5 6 6 5 4 6 4 6 5 4 6 3 4 5 6 4 4 5 5 5 5 4 4 5 5 5 5 4 6
Channel 3 : 3 4 6 4 5 5 5 4 5 4 4 4 4 6 7 5 5 4 4 5 4 7 4 5 6 5 4 6 5 5 5 4 6 4 4 6 4 5 4 5 4 5 4 4 5 5 6 5 3 4
Channel 4 :
Channel 5 :
Channel 6 :
Channel 7 :
Channel 8 :
Channel 9 : 5 4 5 7 6 6 7 6 5 6 5 6 5 6 4 7 6 5 5 6 6 4 6 5 6 4 5 5 5 6 4 6 5 5 5 6 5 6 5 6 5 5 5 6 4 6 5 6 6 5
Channel 10 : 6 4 5 5 4 6 5 5 5 6 6 5 5 6 6 4 6 6 6 6 5 4 6 4 6 6 5 6 5 6 4 4 6 4 5 5 6 5 6 4 5 6 5 6 5 6 6 4 6 7
Channel 11 : 5 4 3 6 4 5 6 5 5 4 6 5 5 6 5 5 5 6 6 5 6 4 6 4 5 5 4 6 5 5 5 6 6 5 5 4 5 4 4 5 4 6 5 5 4 3 4 5 4 3
Channel 12 :
Channel 13 :
Yesterday, I lost completly the wireless connection.
Today it works a little...
Should I change some setting to get more stable this *bip* connection ???:(
Bonjour je suis Francais et j'ai eu le meme probleme.Quote:
Originally Posted by silver32
Je vais continuer en anglais que tout le monde puisse profiter de mon experience.
So here is my experience with my Centrino. I'm owning an Acer TM800 and all was fine since the day i upgraded the drivers from v8.1.1 to v9.x.x. After upgrading i had the same symptoms as you. The Asus doesn't seem to be faulty since i had the same problems at my workplace with a Netgear AP....
At my workplace a colleague is experiencing the same issues with a Sony Centrino notebook.
I got so pissed of by this Intel card that i replaced it with a Gigabyte WI01GS based on a Ralink chipset..... Now everything is just find, i can even connect to AP's the Intel card would'nt let me connect (even with drivers v8.1.1). I bought the card on eBay Germany.
If you want to downgrade to v8.1.1 to test let me know, because this old version of the driver is no more avilable on Intel's website, but i can upload it somewhere.
PS : No matter what driver version i was using i always had the best results using the Intel utility rather than the Windows utility.
Hi silver32,
it is me ones again...
try to use netstumbler (http://www.netstumbler.com/) to "see" the networks of your neighbours. which chanels are they using, use an other one! don't select the auto- function. this was one very important thing for me. unfortunatly there are sometimes up to 7 wireless- lans in my area, so it is hard to get a free chanel! using the chanel of a neighbour works very slowly or does not work at all!
maybe somebody else knows, how to set up the 500gx to search for a free chanel and to change to the new one at once!? i allways get the same chanel in "auto- mode", sometimes it is not free anymore.
MARCO
and also increase your txpower. Mine is on 45mwat
I've been struggling with the 2000BG in my X41 Tablet for a while.
I had the constantly changing connection speed problem, but an update to intel's latest driver solved that. You can get it on the intel site, although the latest there is 9.0.3.9, but I was able to get 9.0.4.8 from IBM. 9.0.3.9 did solve this problem for me.
http://support.intel.com/support/wir.../CS-010623.htm
Even with the update, I have had regular problems with holding a connection with any of the custom firmwares beyond 1.9.2.7-3b. The connection just drops out randomly--this is a common problem with the 2000BG and many routers, and there seems to be no fix that works in all cases.
I have found that 3b works w/ reasonable stability. I still lose the network connection at least twice a day, but a cycling of the wireless card off and on will reestablish it.
I have tried various versions of 1.9.2.7-6 and 7, and now I am actually trying out 3c, (haven't tried 4). I bet the switch to a different wireless driver in 1.9.2.7-5 is the culprit here. I don't think it is necessarily the new driver in the firmware, but rather that the intel card/software that is incompatible with this 5 and above.
Note that the likely problem is the 2000BG, not the firmware. Many, many people online complain about this wireless card. It works fine with some routers and has difficulty with others. You can find all sorts of recommendations on how to solve the problem, but it seems that there isn't one that works every time.
Honestly, if this was my computer, I would replace the 2000BG with another miniPCI card. But it is a work computer, so I'm not investing anything in it.