Guys, finally it's seems I've found an error in the ASUS stuff. Please try using this firmware. Hopefully it will fix kernel oopses. Please let me know if it's working now.
Rootfs is here
Regards, Oleg.
Printable View
One more error fixed in this one
Was even worse :-(
Looking in the log (attached), it has some memory problems. Had to reset and do a recover to get it working again.
I think you got a memory problem. It did not detect all memoryQuote:
Originally Posted by ebakke
Jan 1 01:00:14 WL500g user.warn klogd: Determined physical RAM map:\
Jan 1 01:00:14 WL500g user.warn klogd: memory: 00700000 @ 00000000 (usable)\
J
I dunno if that's a device issue or a firmware issue. I had it a couple of times, and switching off the device for a minute did miracles.
Power off router for several minutes. It's a "feature" of the broadcom memory size detection algorithm. Once the memory get's cleared it will boot normally.Quote:
Originally Posted by ebakke
Also, try reflashing firmware after that. It's seems it was not updated...
I am very impressed with Oleg's work :)Quote:
Originally Posted by Oleg
As the test4 firmware has solved the problem I have had with my EPSON Stylus 740 printer,
I was wondering if it is possible to get the 1.7.5.6-test4 rootfs ?
Regards, Steen
Switch the router of for couple of minutes and flashed it again (test4), everything seems to work fine now on my HP PSC 2210!!Quote:
Originally Posted by Oleg
{Deskjet 960c connected by parallel port}
log says:
Jan 1 00:00:18 WL500g user.notice dhcp client: deconfig: lease is lost
Jan 1 00:00:19 WL500g daemon.warn dnsmasq[430]: failed to drop root privs
Jan 1 00:00:20 WL500g user.notice dhcp client: bound IP address 192.168.0.4 from server 192.168.0.1
May 8 15:35:29 WL500g user.warn klogd: lp driver: get device ID
May 8 15:35:29 WL500g user.warn klogd: neg fail
May 8 15:35:31 WL500g user.warn klogd: lp driver: get device ID
May 8 15:35:31 WL500g user.warn klogd: neg fail
May 8 15:35:31 WL500g user.warn klogd: neg fail
May 8 15:35:33 WL500g user.warn klogd: Register User Space Key Handler : 637 0
May 8 15:35:33 WL500g user.emerg NTP client: time is synchronized to 131.107.1.10
May 8 15:35:37 WL500g user.warn klogd: lp driver: get device ID
May 8 15:35:37 WL500g user.warn klogd: neg fail
May 8 15:35:37 WL500g user.warn klogd: neg fail
May 8 15:35:43 WL500g user.warn klogd: lp driver: get device ID
May 8 15:35:43 WL500g user.warn klogd: neg fail
May 8 15:35:43 WL500g user.warn klogd: neg fail
May 8 15:35:49 WL500g user.warn klogd: lp driver: get device ID
May 8 15:35:49 WL500g user.warn klogd: neg fail
May 8 15:35:49 WL500g user.warn klogd: neg fail
May 8 15:35:55 WL500g user.warn klogd: lp driver: get device ID
May 8 15:35:55 WL500g user.warn klogd: neg fail
May 8 15:35:55 WL500g user.warn klogd: neg fail
May 8 15:36:01 WL500g user.warn klogd: lp driver: get device ID
May 8 15:36:01 WL500g user.warn klogd: neg fail
May 8 15:36:01 WL500g user.warn klogd: neg fail
May 8 15:36:07 WL500g user.warn klogd: lp driver: get device ID
May 8 15:36:07 WL500g user.warn klogd: neg fail
May 8 15:36:07 WL500g user.warn klogd: neg fail
FW version?Quote:
Originally Posted by darrellr
Please wait for 1.7.5.6-3. It's coming soon.Quote:
Originally Posted by Steen
FW = Oleg Test4
There is no printing attempts shown in the log. Have you read and followed the instructions? Please note, ASUS windows stuff does not work with custom firmwares.Quote:
Originally Posted by darrellr
Here is log when I attempt to print:
May 8 15:53:42 WL500g user.warn klogd: lp driver: get device ID
May 8 15:53:42 WL500g user.warn klogd: neg fail
May 8 15:53:42 WL500g user.warn klogd: neg fail
May 8 15:53:48 WL500g user.warn klogd: lp driver: get device ID
May 8 15:53:48 WL500g user.warn klogd: neg fail
May 8 15:53:48 WL500g user.warn klogd: neg fail
May 8 23:39:08 WL500g lpr.notice syslog: Connection from 192.168.1.5 port 3930 accepted
May 8 23:39:08 WL500g user.warn klogd: lp driver: get device ID
May 8 23:39:08 WL500g user.warn klogd: neg fail
Also the "status" webpage shows:
Printer Model: [blank]
Pinter Status: [Off-line]
User: [blank]
Action {remove button}
I'm really sorry but I can't do anything with that. LPT printing stuff is still not published by ASUS, so I can't even figure out what happens inside their stuff.
Log looks fine.
Thanks for replying.
I attached the printer via USB - it was correctly detected on the status page and printed fine (once I realised I needed to print on port 9101 instead of 9100!!!).
So USB okay, LPT no go. :confused: