Printable View
Hi to everybody. I have tried to overcloccare l my wl500w with the settaggs of this post :
http://wl500g.info/showthread.php?t=...ht=reset+nvram.
Trying to restart the processor performing the command cat / proc / cpuinfo me for a long time
BogoMIPS: 263.78
Does it mean that overclocking is not possible? It would interest me since my cpu is almost always to 100% (transmission / rddtol / samba)
thx advance.
Well, overclocking is in my opinion no solution, because maybe you'll achieve 10% more, thats it! It isn't worth the risk to brick your router.
I would suggest to use your Asus as AP only, without any routing function (an other router can handle this). Further, I wouldn't start everything when booting - just when needed. Then I would throw out any unneeded modules in order to get more free ram, use lsmod - usually audio modules are never used as well as others (dependent to your config), but be careful some modules will show you unused and it's not true. In any case when you get more free memory, you router will work much better (swaping for instance takes a lot of cpu power)
When everthing must run on just one device, you can try to set priority of running softwaare to different levels.
For instance: give samba the highest priority:
echo "Starting smbd:"
/opt/bin/nice -n-20 /opt/sbin/smbd -D;
echo "Starting nmbd:"
/opt/bin/nice -n-19 /opt/sbin/nmbd -D;
Please read: "man nice"
Priority settings are -20 (highest) up to 19 (lowest), default=0
Have fun
Thanks of the infos. I have retried to overclocking but in my router it doesn't work therefore it will be my turn to leave it to 264Mhz!
Overcloking works for 500gP. Oleg suggests to use:
( http://wl500g.info/showthread.php?t=6820 )Code:nvram set clkfreq=300,150
nvram commit
reboot
However, his suggestion is to avoid using of this on the devicese different than 500gP (at least unless getting acquainted with sources) ;)
Hi, I've tried to overclock my router with:
It rebooted ok, seems to work... now I have:Code:nvram set clkfreq=300,150
nvram commit
reboot
My BIG question: How do I set it back ?Code:[admin@WL500gP_sus root]$ cat /proc/cpuinfo
system type : Broadcom BCM947XX
processor : 0
cpu model : BCM3302 V0.6
BogoMIPS : 299.82
nvram set clkfreq=266,133 ?
Propably this:
nvram set clkfreq=264
nvram commit
reboot
264 is the original clockfrequency.
I don't know where you got the '150' from...
Use search.Quote:
Originally Posted by Arise
Search for 'set clkfreq', first line from result of 4 lines, last message:
http://wl500g.info/showthread.php?p=...clkfreq&page=2
And backwards:
http://wl500g.info/showpost.php?p=38699&postcount=25
Please use the search function, usually everything is already solved.
Thanks. Tried it and it works.
I don't understand however why for overlock I have to specify beside the cpu speed (300) also the front side bus (this is the number 150 right?) and when I want to revert back I have to specify only the CPU speed?
don't really know why (maybe) fsb speed must be specified.
Maybe because 133 mhz is standard.
Anyway, overclocking is for me the last try - just one error and maybe you have to throw......could be pretty expensive for just one try.
Freeing ram, assigning different priorities for running software is the way to go when your router is abused as server and others. Even pc's with 10 times more cpu power do not run routing, firewall, nat, wireless, file-server, ftp-server, webserver, torrent-client and a bunch of other stuff at the same time!
Have fun
If you want to know why --- check sources... , or : http://wl500g.info/showpost.php?p=38616&postcount=4 ;)Quote:
I don't understand however why for overlock I have to specify beside the cpu speed (300) also the front side bus (this is the number 150 right?) and when I want to revert back I have to specify only the CPU speed?
I can't understand russian. :D
I translated the main idea :)
You see, Russian part of this forum contains a lot of valuable information. May be it's a good time to start learning Russian :D
:)Quote:
Originally Posted by al37919
Perhaps. Or, to use a translator. :)
We also read in other languages ...
Joking or not, using the translator doesn't guarantee 100% satisfaction.
For example: http://babelfish.altavista.com/babel...6postcount%3d4
:eek:
Just to clarify: there two 300Mhz entries in the bootloader table. It will use first (300,133) if you does not specify bus speed. Unfortunately there seems to be a bug in the bootloader which is preventing 300/133 to run properly, so we choose second entry 300,150 which works fine on most routers. As opposite, 264Mhz entry is the only one in the bootloader table.
Can you share how to do overclocking?:eek:Quote:
Originally Posted by wpte
sure: http://wpte.kicks-ass.net/forum/view...hp?thread_id=8Quote:
Originally Posted by snowx
Keep an eye on the temperature tho... asus underclocked the router for thermal reasons;)
Hello,
I read few threads about OC W500gP, but WL500W has different CPU - BCM4704 (default running at 266MHz). As we can read at Broadcom WWW BCM4704 is 300MHz CPU.
There is simple way to change CPU's freq using nvram command (additionally I want add heatsink and small fan to better air flow).
What about FSB of memory? If I think properly, when CPU is clocked at 266MHz there is 133MHz on memory. Can I setor I must setCode:clkfreq=300,133
Best regardsCode:clkfreq=300,150
the following applies to wl500gpv1 & wl500w:
http://wl500g.info/showthread.php?t=12546
Thank you.Quote:
Originally Posted by al37919