WDS / Hybrid not working? or i'm just stupid..
did someone manage to get 2 WL-500g's talking to eachother over WDS / Hybrid mode ?
i've 2 wl500g's(firm 1.6.5.3 patched) here, both in Hybrid mode,
added the MAC address of the remote wl500gs in it's remote bridge list, something seems to be working..
when i do 'ifconfig' it show's the normal devices plus this one:
wds0.2 Link encap:Ethernet HWaddr 00:0C:6E:9A:A9:46
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
but i'm not really able to ping/reach the other wl500g/network
help me! :)
Re: I have the same problem
Quote:
Originally posted by Noe
Hi, I had the same problem. Do you know where can I complain ?
Thanks
Dr. Noé Vilas Boas
University of Minho
Portugal
nope (or yes at asus..... don't expect much reply)
but it's reported working already by someone else
so the problem lies somewhere else i think
Cant connect laptop to asus wl-500g in wds mode
scenario:
2x Asus wl-500g
on in gateway mode, one in access point mode...
both of them are configured in hybrid mode and connect together.
anonymous access is disabled
access list with mac filter is on accept mode
in factory default mode with one asus wl-500g the pc card is working. if i put hybrid mode on the pc card isnt working any longer. someone has the same problem???
Re: Cant connect laptop to asus wl-500g in wds mode
Quote:
Originally posted by Wisi
scenario:
2x Asus wl-500g
on in gateway mode, one in access point mode...
both of them are configured in hybrid mode and connect together.
anonymous access is disabled
access list with mac filter is on accept mode
in factory default mode with one asus wl-500g the pc card is working. if i put hybrid mode on the pc card isnt working any longer. someone has the same problem???
can you explain more?
does the card see your network, and you can connect and then it disconnects again and says network avaible and so on ?
i have this problem, don't know if it's because of the wds didn't try (note wds is turned on, because i forgot to turn it off) if it work with wds turned off ?
ps the card i'm having problems with is a Intersil based minipci card.