LOGIN: Alphanetworks
PASSWORD: wrgg27_dlwbr_dir320
Printable View
скачал.. но проблемка : там три файла.....Quote:
Новейшая прошивка от Олега, lly, theMiron и меня 1.9.2.7-627-d-3g-wimax-mpcs со встроенной программой для спутникового шаринга MPCS и поддержкой GPRS, CDMA, UMTS , WiMAX модемов и телефонов c помощью скрипта. Инструкция и прошивка в архиве по ссылке http://rapidshare.de/files/48422578/...-mpcs.rar.html. В архиве прошивки для Asus 500gP, 500W , 500gPv2(она же для Dlink DIR-320 и для Asus 500gU) и 3 инструкции по настройке: mpcs, 3g модемов, WiMAX модема. Для этой прошивки пункт 9 выполнять не нужно. Размер архива 4 мегабайта.
старая прошивка: 1.9.2.7-d-r261M
какой из тех трех файлов для обновления использовать?
и после того как обновлю.. что делать? перезагрузить и все? reset ему делать не надо?
или еще какие нибудь фокусы?
Кто-нибудь пробовал поставить МТС-овскую прошивку на обычный DIR-320?
Ребят, имеется DIR-320, хотел прошить прошивкой от Олега, прочитав инструкцию, понял что меняются мак адреса. Скажите, пожалуйста, как узнать мак адрес вайфая? В статистике есть только адреса лан и ван. Этих трех адресов будет достаточно? Не хочется наломать дров. Подскажите, пожалуйста.
В прошивке ddns.conf не нашёл. Создал самостоятельно, изменил путь на /usr/local/etc/ddns.conf, проверил работу скрипта: при установленной галке в вебфейсе "DDNS" скрипт отрабатывает и посылает на сервер dyndns.org ip-адрес вида 10.х.х.х, что логично, т.к. он берёт его из wmx0.Code:if [ $(nvram get ddns_enable_x) == 1 ]; then
echo "interface=$2" > /etc/ddns.conf
start_ddns
Подскажите, где вообще используется (вызывается) содержимое файла ddns.conf? Я открыл его - в нём запись "interface=wmx0" (это понятно откуда). Как передать вместо ip wmx0-интерфейса ip-адрес, определяемый checkip.dyndns.org?
30/30/30 не помогает, при установке новой прошивки не работает либо инет, либо локальная сеть.даже на стандартной d-link.
Такой вопрос. Cабжевый роутер переодически отваливается от провайдера.. что бы это могло быть?
Oct 4 17:40:35 ntp client: Synchronizing time with time.nist.gov ...
Oct 4 17:44:17 pptp[99]: No response to 6 echo-requests
Oct 4 17:44:17 pptp[99]: Serial link appears to be disconnected.
Oct 4 17:44:17 pptp[99]: Connect time 4.9 minutes.
Oct 4 17:44:17 pptp[99]: Sent 36933592 bytes, received 2059676 bytes.
Oct 4 17:44:17 dnsmasq[67]: read /etc/hosts - 2 addresses
Oct 4 17:44:17 dnsmasq[67]: using nameserver xx.xxx.xxx.2#53
Oct 4 17:44:17 dnsmasq[67]: using nameserver xxx.xxx.xxx.2#53
Oct 4 17:44:17 PPTP: Disconnected
Oct 4 17:44:20 pptp[106]: Fatal signal 10
Oct 4 17:44:20 pptp[106]: Exit.
Oct 4 17:44:23 pptp[99]: Connection terminated.
Прошивка Олега 1.9.2.7-d-r617.
Опять отвалился :(
Oct 4 18:34:49 ntp client: Synchronizing time with time.nist.gov ...
Oct 4 19:39:47 pptp[91]: No response to 6 echo-requests
Oct 4 19:39:47 pptp[91]: Serial link appears to be disconnected.
Oct 4 19:39:47 pptp[91]: Connect time 66.1 minutes.
Oct 4 19:39:47 pptp[91]: Sent 1851601506 bytes, received 64233716 bytes.
Oct 4 19:39:47 dnsmasq[67]: read /etc/hosts - 2 addresses
Oct 4 17:44:17 dnsmasq[67]: using nameserver xx.xxx.xxx.2#53
Oct 4 17:44:17 dnsmasq[67]: using nameserver xxx.xxx.xxx.2#53
Oct 4 19:39:47 PPTP: Disconnected
Oct 4 19:39:53 pptp[91]: Connection terminated.
Oct 4 19:40:25 pptp[91]: Starting link
Oct 4 19:40:25 pptp[91]: route_add: not adding existing route
Oct 4 19:40:26 pptp[91]: Connect: ppp0 <--> pptp (172.17.0.1)
Oct 4 19:40:26 pptp[91]: CHAP authentication succeeded
Oct 4 19:40:27 pptp[91]: Open TCP xx.xxx.xxx.xxx:2705 -> xx.xx.xx.xxx:40595
Oct 4 19:40:27 pptp[91]: Open TCP xx.xxx.xxx.xxx:2704 -> xx.xxx.xxx.xx:61475
Oct 4 19:40:27 dnsmasq[67]: read /etc/hosts - 2 addresses
Oct 4 17:44:17 dnsmasq[67]: using nameserver xx.xxx.xxx.2#53
Oct 4 17:44:17 dnsmasq[67]: using nameserver xxx.xxx.xxx.2#53
Oct 4 19:40:27 PPTP: connected to ISP
Cудя по второму логу-коннект сам обратно поднялся. Но чаще коннект отсутствует. Пока не перезагрузишь роутер. И не факт что после перезагрузки он поднимется. В чем может быть дело? Кто глючит? Роутер или провайдер?
Здравствуйте! Множится dnsmasq в логах :и т.д... Т.е. через примерно час запускаются ещё две копии dnsmasq с тем же PID :( Что это? Как это убрать? Не хочется действовать грубо - но пока пришла мысль только медвежья - перезагружать роутер скриптом раз в несколько часов... Но это, как говорится, не наш метод. Может подскажите что м.б?Code:Jan 1 03:00:02 syslogd started: BusyBox v1.15.1
Jan 1 03:00:02 kernel: klogd started: BusyBox v1.15.1 (2009-09-25 13:45:12 MSD)
Jan 1 03:00:02 kernel: CPU revision is: 00029029
Jan 1 03:00:02 kernel: Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Jan 1 03:00:02 kernel: Primary data cache 16kB, 2-way, linesize 16 bytes.
Jan 1 03:00:02 kernel: Linux version 2.4.37.6 (root@localhost) (gcc version 3.4.6) #3 2009-09-26 16:48:08 MSD
Jan 1 03:00:02 kernel: Setting the PFC to its default value
Jan 1 03:00:02 kernel: Determined physical RAM map:
Jan 1 03:00:02 kernel: memory: 02000000 @ 00000000 (usable)
Jan 1 03:00:02 kernel: On node 0 totalpages: 8192
Jan 1 03:00:02 kernel: zone(0): 8192 pages.
Jan 1 03:00:02 kernel: zone(1): 0 pages.
Jan 1 03:00:02 kernel: Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Jan 1 03:00:02 kernel: Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Jan 1 03:00:02 kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 1 03:00:02 kernel: Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 03:00:02 kernel: Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 03:00:02 kernel: Checking for 'wait' instruction... unavailable.
Jan 1 03:00:02 kernel: POSIX conformance testing by UNIFIX
Jan 1 03:00:02 kernel: PCI: no core
Jan 1 03:00:02 kernel: PCI: Fixing up bus 0
Jan 1 03:00:02 kernel: Linux NET4.0 for Linux 2.4
Jan 1 03:00:02 kernel: Based upon Swansea University Computer Society NET3.039
Jan 1 03:00:02 dnsmasq[67]: started, version 2.51test3 cachesize 150
Jan 1 03:00:02 dnsmasq[67]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-scripts no-TFTP
Jan 1 03:00:02 dnsmasq-dhcp[67]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, lease time 1d
Jan 1 03:00:02 dnsmasq[67]: read /etc/hosts - 2 addresses
Jan 1 03:00:02 kernel: usb.c: registered new driver usbdevfs
Jan 1 03:00:02 kernel: usb.c: registered new driver hub
Jan 1 03:00:02 kernel: usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
Jan 1 03:00:02 kernel: usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
Jan 1 03:00:02 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 03:00:02 kernel: hub.c: USB hub found
Jan 1 03:00:02 kernel: hub.c: 2 ports detected
Jan 1 03:00:03 kernel: ehci_hcd 00:03.1: PCI device 14e4:471a
Jan 1 03:00:03 kernel: ehci_hcd 00:03.1: irq 6, pci mem b8003800
Jan 1 03:00:03 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 03:00:03 kernel: ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 10 Dec 2004/2.4
Jan 1 03:00:03 kernel: hub.c: USB hub found
Jan 1 03:00:03 kernel: hub.c: 2 ports detected
Jan 1 03:00:03 kernel: usb.c: registered new driver usblp
Jan 1 03:00:03 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 03:00:04 kernel: hub.c: new USB device 00:03.1-1, assigned address 2
Jan 1 03:00:04 kernel: usb.c: USB device 2 (vend/prod 0x4e8/0x6761) is not claimed by any active driver.
Jan 1 03:00:04 kernel: usb.c: registered new driver audio
Jan 1 03:00:04 kernel: audio.c: v1.0.1:USB Audio Class driver
Jan 1 03:00:05 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 03:00:05 kernel: Initializing USB Mass Storage driver...
Jan 1 03:00:05 kernel: usb.c: registered new driver usb-storage
Jan 1 03:00:06 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 03:00:06 kernel: Vendor: Samsung Model: Install Disk Rev: 0.10
Jan 1 03:00:06 kernel: Type: CD-ROM ANSI SCSI revision: 02
Jan 1 03:00:06 kernel: USB Mass Storage support registered.
Jan 1 03:00:06 kernel: vlan1: Setting MAC address to 00 90 4c c0 00 00.
Jan 1 03:00:06 kernel: VLAN (vlan1): Underlying device (eth0) has same MAC, not checking promiscious mode.
Jan 1 03:00:07 dnsmasq[67]: read /etc/hosts - 2 addresses
Jan 1 03:00:07 dhcp client: deconfig: lease is lost
Jan 1 03:00:07 dropbear[109]: Running in background
Jan 1 03:00:13 kernel: Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Jan 1 03:00:18 admin: Start my post-boot script
Jan 1 03:00:18 kernel: USB device disconnected from the SCSI subsystem
Jan 1 03:00:22 dnsmasq[67]: read /etc/hosts - 2 addresses
Jan 1 03:00:23 dnsmasq[67]: read /etc/hosts - 2 addresses
Jan 1 03:00:23 dnsmasq[67]: using nameserver 94.25.128.74#53
Jan 1 03:00:23 dnsmasq[67]: using nameserver 94.25.208.74#53
Jan 1 03:01:08 ddns update: no update needed at this time
Oct 5 07:25:29 ntp client: Synchronizing time with time.nist.gov ...
Oct 5 07:29:37 ddns update: no update needed at this time
Oct 5 07:34:55 ddns update: no update needed at this time
Oct 5 07:40:12 ddns update: no update needed at this time
Oct 5 07:45:29 ddns update: no update needed at this time
Oct 5 07:50:46 ddns update: no update needed at this time
Oct 5 07:56:03 ddns update: no update needed at this time
Oct 5 08:01:20 ddns update: no update needed at this time
Oct 5 08:06:37 ddns update: no update needed at this time
Oct 5 08:11:55 ddns update: no update needed at this time
Oct 5 08:17:12 ddns update: no update needed at this time
Oct 5 08:22:30 admin: Script uptime 60 min. Deleting temp.log, update Hour.log
Oct 5 08:22:30 ddns update: no update needed at this time
Oct 5 08:27:48 ddns update: no update needed at this time
Oct 5 08:33:05 ddns update: no update needed at this time
Oct 5 08:38:22 ddns update: no update needed at this time
Oct 5 08:43:39 ddns update: no update needed at this time
Oct 5 08:48:56 ddns update: no update needed at this time
Oct 5 08:53:35 dnsmasq[67]: read /etc/hosts - 2 addresses
Oct 5 08:53:35 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 08:53:35 dnsmasq[67]: using nameserver 94.25.208.74#53
Oct 5 08:53:35 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 08:53:35 dnsmasq[67]: using nameserver 94.25.208.74#53
Oct 5 08:54:13 ddns update: no update needed at this time
Oct 5 08:59:30 ddns update: no update needed at this time
Oct 5 09:04:47 ddns update: no update needed at this time
Oct 5 09:10:05 ddns update: no update needed at this time
Oct 5 09:15:21 ddns update: no update needed at this time
Oct 5 09:20:38 admin: Script uptime 60 min. Deleting temp.log, update Hour.log
Oct 5 09:20:39 ddns update: no update needed at this time
Oct 5 09:25:37 ntp client: Synchronizing time with time.nist.gov ...
Oct 5 09:25:56 ddns update: no update needed at this time
Oct 5 09:31:18 ddns update: no update needed at this time
Oct 5 09:36:35 ddns update: no update needed at this time
Oct 5 09:42:02 ddns update: no update needed at this time
Oct 5 09:47:19 ddns update: no update needed at this time
Oct 5 09:52:36 ddns update: no update needed at this time
Oct 5 09:57:54 ddns update: no update needed at this time
Oct 5 10:03:11 ddns update: no update needed at this time
Oct 5 10:08:28 ddns update: no update needed at this time
Oct 5 10:13:45 ddns update: no update needed at this time
Oct 5 10:19:03 admin: Script uptime 60 min. Deleting temp.log, update Hour.log
Oct 5 10:19:03 ddns update: no update needed at this time
Oct 5 10:23:35 dnsmasq[67]: read /etc/hosts - 2 addresses
Oct 5 10:23:35 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 10:23:35 dnsmasq[67]: using nameserver 94.25.208.74#53
Oct 5 10:23:35 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 10:23:35 dnsmasq[67]: using nameserver 94.25.208.74#53
Oct 5 10:23:35 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 10:23:35 dnsmasq[67]: using nameserver 94.25.208.74#53
Oct 5 10:24:20 ddns update: no update needed at this time
Oct 5 10:29:37 ddns update: no update needed at this time
Oct 5 10:34:55 ddns update: no update needed at this time
Oct 5 10:40:12 ddns update: no update needed at this time
Oct 5 10:45:29 ddns update: no update needed at this time
Oct 5 10:50:46 ddns update: no update needed at this time
Oct 5 10:56:04 ddns update: no update needed at this time
Oct 5 11:01:20 ddns update: no update needed at this time
Oct 5 11:06:40 ddns update: no update needed at this time
Oct 5 11:11:57 ddns update: no update needed at this time
Oct 5 11:17:15 admin: Script uptime 60 min. Deleting temp.log, update Hour.log
Oct 5 11:17:15 ddns update: no update needed at this time
Oct 5 11:22:33 ddns update: no update needed at this time
Oct 5 11:25:46 ntp client: Synchronizing time with time.nist.gov ...
Oct 5 11:27:50 ddns update: no update needed at this time
Oct 5 11:33:07 ddns update: no update needed at this time
Oct 5 11:38:24 ddns update: no update needed at this time
Oct 5 11:43:41 ddns update: no update needed at this time
Oct 5 11:48:58 ddns update: no update needed at this time
Oct 5 11:53:36 dnsmasq[67]: read /etc/hosts - 2 addresses
Oct 5 11:53:36 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 11:53:36 dnsmasq[67]: using nameserver 94.25.208.74#53
Oct 5 11:53:36 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 11:53:36 dnsmasq[67]: using nameserver 94.25.208.74#53
Oct 5 11:53:36 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 11:53:36 dnsmasq[67]: using nameserver 94.25.208.74#53
Oct 5 11:53:36 dnsmasq[67]: using nameserver 94.25.128.74#53
Oct 5 11:53:36 dnsmasq[67]: using nameserver 94.25.208.74#53
P.S. Роутер Dir-320, прошивка из этой ветки, 627-я, с интегрированными 3g, Wimax, mscp.
А с чего вы взяли, что запускаются копии? Если PID такой же - то и процесс тот же.
Строчка "dnsmasq[67]: read /etc/hosts - 2 addresses" появляется после того, как dnsmasq получает сигнал (SIGHUP) на пере-считывание настроек DNS. Идущие после неё строчки ("dnsmasq[67]: using nameserver ...") показывают считанные из /etc/resolv.conf адреса серверов DNS. Видимо, у вас адреса серверов DNS дописываются в конец файла resolv.conf, вместо того, чтобы перезаписывать его. Поэтому строчки и плодятся.