Ïðîñòàÿ íàñòðîéêà ðîóòåðà äî òîððåíòîâ

Ñåãîäíÿ ïîñëå î÷åðåäíîãî

ipkg update
ipkg upgrade

îáíîâèëèñü rtorrent äî v.0.8.6-1 è libtorrent äî v.0.12.6-1.
À ïîñëå ïåðåçàãðóçêè ðîóòåðà â çàïóùåííûõ ïðîöåññàõ íåò rtorrent'a.

×òî èíòåðåñíî, rtorrent ïîñëóøíî çàïóñêàåòñÿ è íîðìàëüíî ðàáîòàåò ïî

rtorrent -n -o import=/opt/etc/rtorrent.conf

íî êàòåãîðè÷åñêè íå âîñïðèíèìàåò

/opt/etc/init.d/S99rtorrent start

ïèøåò: -sh: /opt/etc/init.d/S99rtorrent: not found, õîòÿ ôàéë òàì, ïîíÿòíîå äåëî, åñòü.

ps -u p2p ïîêàçûâàåò, ÷òî ó þçåðà p2p íå çàïóùåíî íè îäíîãî ïðîöåññà.

Ðîóòåð WL-500g Premium, ïðîøèâêà wl500g-1.9.2.7-d-r740.

Êóäà êîïàòü?

Âåðíè ñòàðûå S99rtorrent è rtorrent.conf íà ñâîè ìåñòà.

Quote:

---

Originally Posted by JHBTYN

Âåðíè ñòàðûå S99rtorrent è rtorrent.conf íà ñâîè ìåñòà.

---

Êàêèå ñòàðûå? Íà êàêèå ìåñòà? :confused:

Äàòû èçìåíåíèÿ S99rtorrent è rtorrent.conf - íå ñåãîäíÿøíèå, ò. å. êàê ðàç îíè-òî è îñòàëèñü ñòàðûìè. È íà ñâîèõ ìåñòàõ - â /opt/etc/init.d/ è /opt/etc/ ñîîòâåòñòâåííî.

Quote:

---

Originally Posted by Bober

Äàòû èçìåíåíèÿ S99rtorrent è rtorrent.conf - íå ñåãîäíÿøíèå, ò. å. êàê ðàç îíè-òî è îñòàëèñü ñòàðûìè.

---

Ïîêàæè ÷òî â íèõ. È ÷òî òû îòâåòèë êîãäà ïðî êîíôèã ñïðàøèâàëî?

Quote:

---

Originally Posted by JHBTYN

Ïîêàæè ÷òî â íèõ.

---

S99rtorrent :

Code:

---

#!/opt/bin/bash

############################################################################
#Optware package of rtorrent uses non-standard layout of directories.    ##
#Uncomment the following line to switch to the default layout of rtorrent.##
############################################################################
#dirlayout="RTORRENT_DEFAULT"

#############
###<Notes>###
#############
# This script depends on screen.
# For the stop function to work, you must set an
# explicit session directory using ABSOLUTE paths (no, ~ is not absolute) in your rtorrent.rc.
# If you typically just start rtorrent with just "rtorrent" on the
# command line, all you need to change is the "user" option.
# Attach to the screen session as your user with
# "screen -dr rtorrent". Change "rtorrent" with srnname option.
# Licensed under the GPLv2 by lostnihilist: lostnihilist _at_ gmail _dot_ com
##############
###</Notes>###
##############

#######################
##Start Configuration##
#######################
# You can specify your configuration in a different file
# (so that it is saved with upgrades, saved in your home directory,
# or whateve reason you want to)
# by commenting out/deleting the configuration lines and placing them
# in a text file (say /home/user/.rtorrent.init.conf) exactly as you would
# have written them here (you can leave the comments if you desire
# and then uncommenting the following line correcting the path/filename
# for the one you used. note the space after the ".".
# . /etc/rtorrent.init.conf

#Do not put a space on either side of the equal signs e.g.
# user = user
# will not work
# system user to run as
user="root"

# the system group to run as, not implemented, see d_start for beginning implementation
# group=`id -ng "$user"`

prefix="/opt"

# the full path to the filename where you store your rtorrent configuration
if [ "${dirlayout}" = "RTORRENT_DEFAULT" ] ; then
  config="${prefix}/home/${user}/.rtorrent.rc"
else
  config="/opt/etc/rtorrent.conf"
fi

# set of options to run with
if [ "${dirlayout}" = "RTORRENT_DEFAULT" ] ; then
  options=""
else
  options="-n -o import=${config}"
fi

# default directory for screen, needs to be an absolute path
if [ "${dirlayout}" = "RTORRENT_DEFAULT" ] ; then
  base="${prefix}/home/${user}"
else
  base="/opt/share/torrent"
fi

# name of screen session
srnname="rtorrent"

# file to log to (makes for easier debugging if something goes wrong)
logfile="/opt/var/log/rtorrentInit.log"

#######################
###END CONFIGURATION###
#######################
PATH=/opt/bin:/opt/sbin:/usr/bin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME

# Do not proceed unless some apps are available.
test -x /opt/bin/screen || ( echo "screen not found." | tee -a "$logfile" >&2 ; exit 2 )
test -x /opt/bin/su -o -x /bin/su || ( echo "su not found." | tee -a "$logfile" >&2 ; exit 2 )

checkcnfg() {
        exists=0
        for i in `echo "$PATH" | tr ':' '\n'` ; do
                if [ -f "$i/$NAME" ] ; then
                        exists=1
                        break
                fi
        done


        if [ $exists -eq 0 ] ; then
                echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
                exit 3
        fi
        if ! [ -r "${config}" ] ; then
                echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
                exit 3
        fi
        session=`getsession "$config"`
        if ! [ -d "${session}" ] ; then
                echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
                exit 3
        fi
}

d_start() {
  [ -d "${base}" ] && cd "${base}"

  stty stop undef && stty start undef
  su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
  # this works for the screen command, but starting rtorrent below adopts screen session gid
  # even if it is not the screen session we started (e.g. running under an undesirable gid
  #su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2>&1 1>/dev/null\"" ${user} | tee -a "$logfile" >&2
  su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
}

d_stop() {
        session=`getsession "$config"`
        if ! [ -s ${session}/rtorrent.lock ] ; then
                return
        fi
        pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
        if ps | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
                kill -s INT ${pid}
        fi
}

getsession() {
        session=`awk '/^[[:space:]]*session[[:space:]]*=[[:space:]]*/{print($3)}' "$config"`
        echo $session
}

checkcnfg

case "$1" in
  start)
        echo -n "Starting $DESC: $NAME"
        d_start
        echo "."
        ;;
  stop)
        echo -n "Stopping $DESC: $NAME"
        d_stop
        echo "."
        ;;
  restart|force-reload)
        echo -n "Restarting $DESC: $NAME"
        d_stop
        sleep 1
        d_start
        echo "."
        ;;
  *)
        echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
        exit 1
        ;;
esac

exit 0

---

rtorrent.conf :

Code:

---

# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
scgi_port = 127.0.0.1:5000
enable_trackers = yes
session_save = yes
encoding_list = UTF-8
# Minumum amount of peers to connect per torrent, if available.
min_peers = 5
# Minumum amount of peers to connect per torrent.
max_peers = 40

# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 5
#max_peers_seed = 20

# Maximum number of simultanious uploads per torrent.
max_uploads = 10

# Global download rate in KiB. "0" for unlimited.
download_rate = 0

# Global upload rate in KiB. "0" for unlimited.
upload_rate = 0

# Default directory to save downloaded files. Note it doesn't support
# space yet.
directory = /opt/share/torrent/work/

# Watch a directory for new torrents, and stop those that have been deleted.
schedule = watch_directory,5,5,load_start=/opt/share/torrent/dl/*.torrent
schedule = untied_directory,5,5,stop_untied=

# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /opt/share/torrent/session

# The ip address reported to the tracker.
#ip =

# The ip address the listening socket and outgoing connections is
# bound to.
#bind = rakshasa

# Port range to use for listening.
port_range = 51711-51712

# Start opening ports at a random position within the port range.
port_random = no

# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = no

# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes

# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa

#
# Do not modify the following parameters unless you know what you're doing.
#

# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
hash_read_ahead = 5

# Interval between attempts to check the hash, in milliseconds.
hash_interval = 10

# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
hash_max_tries = 3

# Max number of files to keep open simultaniously.
#max_open_files = 128

# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>


# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"

# Remove a scheduled event.
#schedule_remove = "ip_tick1"

# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"
#schedule = ratio,30,60,stop_on_ratio=200


# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext

# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
dht = on

# UDP port to use for DHT.
#
dht_port = 9091

# Enable peer exchange (for torrents not marked private)
#
peer_exchange = yes

#
# Do not modify the following parameters unless you know what you're doing.
#
safe_sync = yes

---

Quote:

---

Originally Posted by JHBTYN

È ÷òî òû îòâåòèë êîãäà ïðî êîíôèã ñïðàøèâàëî?

---

Ïî óìîë÷àíèþ - No. Òàê è îòâåòèë.

Ê ñëîâó, è ñàìáà, è lighttpd çàïóñêàþòñÿ è èñïðàâíî ðàáîòàþò. Êàïðèçíè÷àåò ñòðîãî òî, ÷òî îáíîâèëîñü. :(

Ó òåáÿ S99rtorrent òîò, êîòîðûé óñòàíàâëèâàåòñÿ ïî óìîë÷àíèþ. Èçìåíè åãî êàê óêàçàíî â òîé èíñòðóêöèè ïî êîòîðîé òû íàñòðàèâàë, è ïåðåçàïóñòè rtorrent.

Quote:

---

Originally Posted by Bober

Ñåãîäíÿ ïîñëå î÷åðåäíîãî

ipkg update
ipkg upgrade

îáíîâèëèñü rtorrent äî v.0.8.6-1 è libtorrent äî v.0.12.6-1.
À ïîñëå ïåðåçàãðóçêè ðîóòåðà â çàïóùåííûõ ïðîöåññàõ íåò rtorrent'a.

×òî èíòåðåñíî, rtorrent ïîñëóøíî çàïóñêàåòñÿ è íîðìàëüíî ðàáîòàåò ïî

rtorrent -n -o import=/opt/etc/rtorrent.conf

íî êàòåãîðè÷åñêè íå âîñïðèíèìàåò

/opt/etc/init.d/S99rtorrent start

ïèøåò: -sh: /opt/etc/init.d/S99rtorrent: not found, õîòÿ ôàéë òàì, ïîíÿòíîå äåëî, åñòü.

ps -u p2p ïîêàçûâàåò, ÷òî ó þçåðà p2p íå çàïóùåíî íè îäíîãî ïðîöåññà.

Ðîóòåð WL-500g Premium, ïðîøèâêà wl500g-1.9.2.7-d-r740.

Êóäà êîïàòü?

---

ñþäà ïðîáóé http://www.wl500g.info/showpost.php?...&postcount=832

Îòëè÷íûé íàáîð ñêðèïòîâ, ïîñòàâèëîñü íà óðà.
Íî ãëþêè åñòü
- ados íå çàðàáîòàë, íó äà áîã ñ íèì, íå îñîáî òî è íóæåí.
- ïîïðîáîâàë çàéòè â âåá ìîðäó rTorrent è RRD ñ íîóòà, êîòîðûé ïîäðóáàåòñÿ ê èíåòó ÷åðåç ðîóòåð, ïîÿâèëàñü ñòðàíè÷êà çàïðîñà ëîãèíà è ïàðîëÿ, ââîæó è ïîëó÷àþ 404 - Not Found :(
Ïîäñêàæèòå ãäå êîïàòü.... ó ìåíÿ ïðÿìîé IP è õîòåëîñü áû ñ ðàáîòû êîíòðîëèðîâàòü êàê çàêà÷êè èäóò.

PS: Íà íîóòå Linux, à ÿ òàê ïîíèìàþ ÷òî lightpd ðàçäàåò ïðàâà ïî âèíäîâûì ãðóïïàì? èëè ÿ îøèáàþñü.

Quote:

---

Originally Posted by Bober

Ñåãîäíÿ ïîñëå î÷åðåäíîãî

ipkg update
ipkg upgrade

îáíîâèëèñü rtorrent äî v.0.8.6-1 è libtorrent äî v.0.12.6-1.
À ïîñëå ïåðåçàãðóçêè ðîóòåðà â çàïóùåííûõ ïðîöåññàõ íåò rtorrent'a.

×òî èíòåðåñíî, rtorrent ïîñëóøíî çàïóñêàåòñÿ è íîðìàëüíî ðàáîòàåò ïî

rtorrent -n -o import=/opt/etc/rtorrent.conf

íî êàòåãîðè÷åñêè íå âîñïðèíèìàåò

/opt/etc/init.d/S99rtorrent start

ïèøåò: -sh: /opt/etc/init.d/S99rtorrent: not found, õîòÿ ôàéë òàì, ïîíÿòíîå äåëî, åñòü.

ps -u p2p ïîêàçûâàåò, ÷òî ó þçåðà p2p íå çàïóùåíî íè îäíîãî ïðîöåññà.

Ðîóòåð WL-500g Premium, ïðîøèâêà wl500g-1.9.2.7-d-r740.

Êóäà êîïàòü?

---

Òàæå ñèòóàöèÿ...

Íó íàïèñàíî æå, ÷òî íàäî äåëàòü...

ïîñëå îáíîâëåíèÿ ïåðåçàïèñàëñÿ ôàéë S99rtorrent
â íîâîì ôàéëå íóæíî çàìåíèòü ñëåäóþùèå ñòðîêè:

Code:

---

#!/opt/bin/bash
íà
#!/bin/sh
è
user="root"
íà
user="p2p"

---

Âñå ðàáîòàåò!

ìîæåò ÿ ÷òî-òî íå äî÷èòàë, íî rtorrent íå ðåàãèðóåò íà êîìàíäó /opt/etc/init.d/S99rtorrent stop
êàê îòäà÷à øëà, òàê è èä¸ò. Ïðè÷¸ì êîìàíäó ïðîæ¸âûâàåò è ïèøåò "Stopping rtorrent: rtorrent."
ïðîñòî ñèòó¸âèíà òàêàÿ, ÷òî õàðä íåñêîëüêî õðóñòèò èç-çà îòäà÷è òîððåíòîâ è ïåðèîäè÷åñêè áûâàåò íåîáõîäèìîñòü åãî êàê-íèòü óñïîêîèòü (÷èòàé - âûðóáèòü òîððåíò), ÷òîáû áûëî òèõî, íî îñòàâèâ äîñòóïíûì ñàéò, ñòàòèñòèêó è ò.ä. Âåäü åñòü ÿ "ýäæåêòíó" õàðä èç-ïîä âåá ìîðäû àñóñà, òî âñ¸ êðîìå èíåòà óïàä¸ò. Ê òàêèì æåðòâàì íå ãîòîâ.
åñëè ÷òî - ðîóòåð WL500W ïðîøèâêà ïðåäïîñëåäíÿÿ ïîìîåìó 7**(êàêàÿ-òî).

ãóðó äàííîãî ôîðóìà ïðîøó ïîìî÷ü ñ äàííîé ïðîáëåìîé:
ðàíüøå óæå äåëàë êàê çäåñü âñå íàïèñàíî, íî íà ýòîò ðàç íè÷åãî íå ïîëó÷àåòñÿ, îáíîâèëñÿ äî 1.9.2.7-d-r893, ê ðîóòåðó ïðèñòûêîâàíà ôëýøêà íà 5Ãá, ÷åðåç òåðìèíàë âûïîëíèë êîìàíäû êîòîðûå çäåñü íàïèñàíû, íî íà äàííûé ðàç â GUI íå çàõîäèò, êòî ÷òî ñêàæåò???

â ëîãå âîò ÷òî ïèøåò:
Dec 20 14:43:36 kernel: kjournald starting. Commit interval 5 seconds
Dec 20 14:43:36 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Dec 20 14:43:36 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 20 14:43:36 USB storage: ext3 fs at /dev/discs/disc0/part2 mounted to /tmp/mnt/disc0_2
Dec 20 14:43:36 kernel: Adding Swap: 257000k swap-space (priority -1)
Dec 20 14:43:37 rc.unslung: start service /opt/etc/init.d/S80lighttpd
Dec 20 14:43:39 rc.unslung: start service /opt/etc/init.d/S97Samba
Dec 20 14:43:40 rc.unslung: start service /opt/etc/init.d/S99rtorrent

ìîæåò ìàëî èíôû ïðåäîñòàâèë, íàïèøèòå....

Åñëè ÷åñòíî òî ÿ íå ïîíÿë â ÷åì âûðàæàåòñÿ " â GUI íå çàõîäèò"
Åñëè lihttpd íå ñòàðòóåò, òî ïîïðîáóéòå âîò ýòî, â ïîñëåäíåì ñêðèïòå ýòî îáÿçàòåëüíî.