I do not have such diff at all.Quote:
Originally Posted by SurJector
Printable View
I do not have such diff at all.Quote:
Originally Posted by SurJector
Sorry I'm too elliptic, what I meant was: if you do not wish to spend the additional time and effort to make and publish this diff, I'll patch my source firmware alone. I hoped that it was easy for you to compute and publish that diff, that's all (fon instance: the linux kernel is published both in ``complete tarbal''l and ``patch with respect to the last version'', so that you can patch incrementally; it's obvisouly an additional hurdle for you and probably not useful for many people except (maybe) oleo and myself). If you keep the last version of the source tree it might be easy to do, so that I'd be happy to have such a diff, otherwise, let's forget my request.Quote:
Originally Posted by Oleg
I have WL-500G and AT&T is the isp. It was working with all the previouse 7a,7b,7c. After upgrade to 7d, it won't connect to internet. Back to 7c, everything is O.K. The log seems normal and it show connect, but just won't load the web page.Quote:
Originally Posted by dunatos
confirmed. same prb here. any clue?Quote:
Originally Posted by jycai
thx in advance
Guys, post your system logs, please. Which connection type you've selected in the WAN settings? Static/DHCP/...?
thx for ur reply.Quote:
Originally Posted by Oleg
WAN connect by DHCP
syslog with PM
thx
So far no problems with 1.9.2.7-7d. Working fine :)
Hm... According to your syslog, everything is OK, and you've pppoe connection, not dhcp. Also, this log is not for -7d version for sure... Please flash -7d and save correct log.Quote:
Originally Posted by knoes
syslog7d by PM (sorry my fault)Quote:
Originally Posted by Oleg
on 7c again to sent this stuff
greetz a. thx
According to your logs, you're running wl500g deluxe (not the wl500g). Also, according to your logs the box is connected to your ISP and working fine. Could you please clarify your problems?Quote:
Originally Posted by knoes
Also, your connection type is PPPoE, not DHCP!
installed .trx file - WL500gx-1.9.2.7-7dQuote:
Originally Posted by Oleg
connection type is - PPPoE
ISP connection is established though, no access to websides neither mail
flashing back to 7c all is working as it should without changing any settings.
greetz
Try to figure out the reason, i.e. from your PC type:
nslookup www.wl500g.info
ping www.wl500g.info
tracert www.wl500g.info
if something failed - telnet to router and type
nslookup www.wl500g.info
ping www.wl500g.info
traceroute www.wl500g.info
Post your results here.
P.S. I've PPPoE connection to my ISP, everything is working fine.
C:\Documents and Settings\opaold>nslookup www.wl500g.infoQuote:
Originally Posted by Oleg
Server: my.router
Address: 192.168.1.1
Non-authoritative answer:
Name: www.wl500g.info
Address: 87.239.8.20
C:\Documents and Settings\opaold>ping www.wl500g.info
Pinging www.wl500g.info [87.239.8.20] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 87.239.8.20:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Documents and Settings\opaold>tracert www.wl500g.info
Tracing route to www.wl500g.info [87.239.8.20]
over a maximum of 30 hops:
1 2 ms <1 ms <1 ms my.router [192.168.1.1]
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
over telnet:
[opaold@(none) root]$ nslookup www.wl500g.info
Server: www-proxy.K1.srv.t-online.de
Address: 217.237.150.97
Name: www.wl500g.info
Address: 87.239.8.20
[opaold@(none) root]$ ping www.wl500g.info
PING www.wl500g.info (87.239.8.20): 56 data bytes
64 bytes from 87.239.8.20: icmp_seq=0 ttl=57 time=50.7 ms
64 bytes from 87.239.8.20: icmp_seq=1 ttl=57 time=51.2 ms
64 bytes from 87.239.8.20: icmp_seq=2 ttl=57 time=50.3 ms
64 bytes from 87.239.8.20: icmp_seq=3 ttl=57 time=50.
[opaold@(none) root]$ traceroute www.wl500g.info
traceroute to www.wl500g.info (87.239.8.20), 30 hops max, 40 byte packets
1 * * *
2 217.0.74.2 (217.0.74.2) 41.147 ms 41.47 ms 40.55 ms
3 ams-e4.AMS.NL.net.DTAG.DE (62.154.15.2) 47.279 ms 47.686 ms 48.114 ms
4 so6-2-0.mpr3.ams1.nl.above.net (62.4.65.25) 47.679 ms 47.501 ms 48.205 ms
5 pos-8-0.cr1.ams2.nl.above.net (64.125.31.14) 48.423 ms 48.265 ms 48.479 m
s
6 grafix.ams4.nl.above.net (82.98.253.68) 48.861 ms 85.999 ms 48.938 ms
7 rtr-1.rtd-kub.grafix.nl (217.67.232.141) 58.514 ms 217.67.247.5 (217.67.247
.5) 50.192 ms 50.305 ms
8 web00.intention.nl (87.239.8.20) 51.173 ms 50.695 ms 50.204 ms
[opaold@(none) root]$
greetz
Please telnet to router (with 7d running), type
and post output...Code:iptables -vnL
iptables -t nat -vnL
Ok, the reason is the empty WAN ip address field. Wait a bit for 1.9.2.7-7e.