Printable View
Im using this firmware in a WL500g.
Ok this firmware its seems to have some little problem.
I have WMM activated and i use WPA-PSK with TKIP+AES authentication.
When some specific type of wireless card connect to the network ( A2500 Laptop ) the other wirelless users( a siemens card and a aiport from mac card) are disconnected and cant connect anymore.
Ok i have a record from the log i hope you can find something (i think its because of WMM) thank you.
Hello there. I tried to use ppdev.o from http://www.sephail.net/projects/openwrt/ with this firmware but no luck. The thing just freezes when i run lpif -d . I believe the problem is the kernel's version. Would be possible for you to include ppdev in the firmware, or at least to make a working copy of the module available for download?
Thank you
Try disabling WMM then. In fact, I could not help with wireless stuff compatibility, as wireless part is a closed binary.Quote:
Originally Posted by Tomekk
That's it: http://wl500g.dyndns.org/bin/ppdev.oQuote:
Originally Posted by KillerOPS
Save it to the flashfs.
Yes thank you Oleg.
It seems with WMM desactivated this issue never happen again.
Thank you, Oleg. I tried that but same thing...when i try to set something on the LPT with lpif it gives me an Segmentation fault then a reboot. I'm very intrigued by this because i have here two firmwares:
Your firmware - on which ppdev with lpif doesn't work
OpenWRT - on which my OV511-based webcam doesn't work (it just reboots after i start palantir)
=> i can't make them both work
However, I'll try to delete everything unusable from your firmware (printing, dnsmasq etc) and have another go. Maybe you can try (if you have enough free time) lpif -s 255 and lpif -s 0 on your router, to see how it handles it.
A confirmation would be very useful
Thank you again for your work and attention :)
parallel port stuff is not supported, as ASUS have not released source code. FYI, parallel port modules are compiled for 2.4.5 kernel, so looks like ppdev from 2.4.20 do not like this. Drop a mail to ASUS tech support about GPL violation.Quote:
Originally Posted by KillerOPS
I'm unwilling to play with this.
In 1.9.2.7-4 i compile kernel with pl2303 which was in sources (just enable modules usbserial and pl2303 in kernel config). In 1.9.2.7-5a - I use built-in firmware pl2303, and found in your sources of firmware - pl2303 was additionally patched in 1.9.2.7-5a...Quote:
Originally Posted by Oleg
two bugs
Connect dont work after disconnect!
Update Dinamic-DNS dont work!!
....
Hi, with the latest fw my router dies everyday at 13h. I donīt now why.
my configuration is very simple, mac control and wpa-psk tkip in wireless with Manually Assigned IP List.
sys log doesn't help, because after the connnection goes down it clears itself.
with 1.9.2.7 cr5 everything was OK.
Could you please try to found a reason for this problem? The error code returned from call is invalid arguments as seems. Unfortunatly I do not have any serial convertor around, so could not check on this.Quote:
Originally Posted by undead
Try using CR5 then and check if this helps.Quote:
Originally Posted by kiboko
Well, there is a module for the parallel port, module which works on OpenWrt, so i guess it should worl here too. Here it is: http://pwp.netcabo.pt/0246517002/parport_splink.c However, I don't think it's written by ASUS, but, as i said, it works on openwrt, so why it wouldn't here?Quote:
parallel port stuff is not supported, as ASUS have not released source code. FYI, parallel port modules are compiled for 2.4.5 kernel, so looks like ppdev from 2.4.20 do not like this. Drop a mail to ASUS tech support about GPL violation.
I'm unwilling to play with this.
There are 3 modules, parport_splink is just one of them. We need everything.Quote:
Originally Posted by KillerOPS
well, the two others aren't provided with the default kernel sources? (I'm assuming you are talking about parport.o and ppdev.o) Check out OpenWRT's kernel. I would use that instead, but something's wrong wit h the ov511 and/or usb