alpha rt-n firmware releases

Quote:

---

Originally Posted by maurer

do you think an older fw would do the trick - get more throughput?
maybe k 2.4 based ?
or newer :D - 3.0 Openwrt ?
I don't need any features like QoS.
IPv6 would be a good option (native DHCPv6 from ISP)...
Botton line is - highest possible throughput - less features.
Thanks for your help :)

---

it depends on what kind of device you're using.

if it's WL500gP WL500W or any of the R1 MIPS processor series I'd recommend using 2.4.20 kernel (2.6.22.19 kernel seems to be buggy and utilizies lots of CPU when there is network activity).

for new RT-N routers 2.6 kernel is preffered.

Quote:

---

Originally Posted by staticroute

if it's WL500gP WL500W or any of the R1 MIPS processor series I'd recommend using 2.4.20 kernel (2.6.22.19 kernel seems to be buggy and utilizies lots of CPU when there is network activity).

---

i dont know, i have wl500gpv2 and i went for 1.9.2.7-d-4257 and router froze (i had to plug it off and on) during the heavy torrent download (on PC), something that happened first time in years for me..

before i used some rtn-r4xxx revision and router seemed to work fine

what is the best/stable 1.9.2.7-d-rxxxx fw for wl500gpv2 ?

Quote:

---

Originally Posted by outlaw11

i dont know, i have wl500gpv2 and i went for 1.9.2.7-d-4257 and router froze (i had to plug it off and on) during the heavy torrent download (on PC), something that happened first time in years for me..

before i used some rtn-r4xxx revision and router seemed to work fine

what is the best/stable 1.9.2.7-d-rxxxx fw for wl500gpv2 ?

---

not sure, but I think Oleg's original firmware (1.9.2.7-10).

you might try latest -rtn as well, there were some bugs fixed.