I'll do the upgrade tonight and will post my impressions later...Quote:
Originally Posted by Oleg
Printable View
I'll do the upgrade tonight and will post my impressions later...Quote:
Originally Posted by Oleg
No changes. How many times it disconnected? According to log - once. You may need to put "maxfail 0" (without quotes) to the Additional pppd options field and disable pppoe relay.Quote:
Originally Posted by Fama
and my post? about samba ?
int, telnet to router and typeQuote:
Originally Posted by int
post everything here.Code:mount
ps
cat /etc/smb.conf
cat /var/log/smb
cat /etc/hosts
nvram get lan_hostname
nvram get usb_smbenable_x
Thank you!Quote:
Originally Posted by Oleg
I'll give it a try...
I've also got problems after the upgrade (b on a gx).Quote:
Originally Posted by int
First of all a lot of settings where gone after the upgrade. The modem asked me to do the quick setup...
I did [flashfs enable] to restore my previous (samba) settings (/etc/smb.conf is back again) and I had to set my LAN name again.
The deamons are up and running, I get no errors in the /var/log files, /tmp/harddisk works fine, but I can't browse \\192.168.1.1\.
Update: the first problem had to do with the fact that my LAN name was the same as a machine name (that's what you get when you have to do the complete config again).
After that I could browse *something* but it sure wasn't my disk.
The logfile revealed the password file error, so setting
encrypt passwords = no
in /etc/smb.conf did the job.
talking about all things new....has anyone tried the new intel wireless drivers (9.0.2.0) with olegs superb firmware?
the command wl txpwr1 -1 which is supposed to set things to default
sets txpwr to 255
in cr6b and possibly others
Hi Oleg
6b is working here since 11 Days now, and stable even with doing lots of software trys on ipkg packages, so stable as hell for me.
But, my Terratec Webcam Pro is still not working, giving "Webcam capture no Frame" error repetedly in the logs, and showing lightgreen color all over the camserv generated pictures. Refering to here this is broken quite some time now and i have no other cam at the moment, so i am in need for a fix. Maybe a newer Version of the 2.xx Driver series for the OV51x Chips fixes this problem ?. I may remember had it working on some quite old Firmware, but i dont know which one it was, sry.
As a sidenote, disabling buttons for the 3 Print Servers form the Web iface would still be nice to gain some more memory, as we have lots of optional software now that can be enabled ...
Greets
Fine.Quote:
Originally Posted by WlanMan
Probably this would be updated in the 1.9.4.1 custom, but I've no ETA on this.Quote:
But, my Terratec Webcam Pro is still not working, giving "Webcam capture no Frame" error repetedly in the logs, and showing lightgreen color all over the camserv generated pictures. Refering to here this is broken quite some time now and i have no other cam at the moment, so i am in need for a fix. Maybe a newer Version of the 2.xx Driver series for the OV51x Chips fixes this problem ?. I may remember had it working on some quite old Firmware, but i dont know which one it was, sry.
I'm too lazy. On the other hand, if you've some packages running already, then you could easily add killall to the post-boot. That's the point. :)Quote:
As a sidenote, disabling buttons for the 3 Print Servers form the Web iface would still be nice to gain some more memory, as we have lots of optional software now that can be enabled ...
Hi i have two WL500GX. One is like AP with hybrid mode and the second was like client. I have upgraded the old firmware on 1.9.2.7CR6b and the client doesnt work. When i set the client to WDS mode it work but the speed is very slow. Has anything changed with client ?? My client setup was > Operation mode Acess Point, Wirelles bridge only ap, wirelles advanced Ethernet bridge tryied Station to. With this setting has with old firmware worked .. i tryied conect to telnet and putted in console wl scan wl scaresults i cant see the network. Can somebody help me?
Thanks for the note about new version. I tried it today, and so far it works really well - the transmission speed dropped by about 10% on the edge of the signal - but reliability went up incredibly. At the same spot I had about 40% packetloss before and 1% now (at ~100kB/sec speed). Finally usable in whole house ;)Quote:
Originally Posted by Wesleyrpg
Side note: I hate uninstaller of 9.0.1.0 - it rendered computer unbootable and I had to play for about two hours with regedit to get it running
Thanks for the info about this new version. I'm using the 9.0.2.0 intel drvrs right now with the ASUS 1.9.4.0 fw version and WPA2-PSK/TKIP. So I guess it will work fine with Oleg's firmware.Quote:
Originally Posted by Wesleyrpg
Last week I upgraded my WL500G with firmware v1.9.2.7 CR6b. All seems to be oke, but today I discovered that my ssid was not hidden anymore. This I like an invitation to join my wirelessnetwork. I have all of the securty enabled so there is no panic. I hide my SSID now manually by a tellnet session.
nvram set wl0_closed=1
nvram commit
Please can this bug be fixed, or did I something wrong when I upgraded?
Thanx
Colderon :confused: