EV-DO + people.net.ua

Printable View

Show 40 post(s) from this thread on one page

06-05-2011, 10:11
psvd

for rss

Quote:

Originally Posted by rss

# format of record - vid : pid : type : data port : UI port
# vid - vendor id (four hex digits), pid - product id (four hex digits),
# type - 'C' for CDMA or 'W' for WCDMA/HSPA/HSDPA/HSUPA/GSM
# data port - main modem interface number (one digit from 0 to 9)
# UI port - command interface number (one digit from 0 to 9)
# samples - a12b:1001:W:0:2, 01fc:003b:C:3:0

rss, áîëüøîå ñïàñèáî çà îïåðàòèâíîñòü! :)
06-05-2011, 10:18
psvd

huawei EC168

Quote:

Originally Posted by rss

# format of record - vid : pid : type : data port : UI port
# vid - vendor id (four hex digits), pid - product id (four hex digits),
# type - 'C' for CDMA or 'W' for WCDMA/HSPA/HSDPA/HSUPA/GSM
# data port - main modem interface number (one digit from 0 to 9)
# UI port - command interface number (one digit from 0 to 9)
# samples - a12b:1001:W:0:2, 01fc:003b:C:3:0

# vid - vendor id (four hex digits), pid - product id (four hex digits)
Óòî÷íèòå, êàêèå öèôðû íóæíî ââåñòè?
06-05-2011, 10:25
ConstAntz

Quote:

Originally Posted by psvd

# vid - vendor id (four hex digits), pid - product id (four hex digits)
Óòî÷íèòå, êàêèå öèôðû íóæíî ââåñòè?

Code:

nvram show | grep modem_vid nvram show | grep modem_pid
06-05-2011, 20:09
Anubis_OD

×óäåñà ñåãîäíÿ êàêèå-òî.
Ìîäåì ñòàë ñ äðóãèì PIDîì
â çàêëàäêå "View connected modems" òåïåðü PID 140c.
×åãî âäðóã?
Õîòÿ êîìàíäà

Quote:

nvram show | grep modem_pid

ãîâîðèò

Quote:

size: 25145 bytes (7623 left)
wan_modem_pid=0x1446
06-05-2011, 23:28
dlukanidin

Quote:

Originally Posted by ConstAntz

îáíîâèë ïðåäûäóùåå ñîîáùåíèå.
Åñëè è îòêëþ÷åíèå autodetect íå ïîìîãëî, ïîìåíÿéòå íîìåð äîçâîíà

2 dlukanidin huawei íàó÷èëñÿ äåëàòü CDMA ìîäåìû ñ òàêèì-æå ïèäîì?

Ïîñìîòðåë ëîãè.Ïîëíûé áðåä. Äåéñòâèòåëüíî Huawei äåëàåò óñòðîéñòâà ñ îäíèì ïèäîì íà ðàçíûå òåõíîëîãèè. Ýòî äëÿ íà êðàéíå íåóäà÷íîå ðåøåíèå, ò.ê äåëàåò íåâîçìîæíûì àâòîìàòè÷åñêîå îïðåäåëåíèå òèïà ìîäåìà. Ïîêà èäåé íåò.

Ïðîñüáà ê âëàäåëüöàì - ãëÿíüòå ïîä âèíäîé íà êàêîé pid EC122 ïåðåêëþ÷àåòñÿ ðîäíûìè äðàéâåðàìè.

Ïîä¸ðãàéòå çà õâîñò ïðîâàéäåðà, ïóñòü äîãîâîðèòñÿ ñ ïðîèçâîäèòåëåì, ÷òîáû èçìåíèëè ñèòóàöèþ, èíà÷å ïîä ëþáûì ëèí¸ì åñòü âîçìîæíîñòü âîçíèêíîâåíèÿ ïðîáëåì. Äëÿ íèõ ýòî äîëæåí áûòü ñòèìóë, èíà÷å îíè òåðÿþò ÷àñòü ïîäïèñ÷èêîâ.
07-05-2011, 00:45
ConstAntz

Quote:

Originally Posted by dlukanidin

Ïîñìîòðåë ëîãè.Ïîëíûé áðåä. Äåéñòâèòåëüíî Huawei äåëàåò óñòðîéñòâà ñ îäíèì ïèäîì íà ðàçíûå òåõíîëîãèè. Ýòî äëÿ íà êðàéíå íåóäà÷íîå ðåøåíèå, ò.ê äåëàåò íåâîçìîæíûì àâòîìàòè÷åñêîå îïðåäåëåíèå òèïà ìîäåìà. Ïîêà èäåé íåò.

íàèòèå ïîäñêàçûâàåò: CDMA-øíûå äîëæíû áûòü íà 140b

2 Anubis_OD, åùå îäíî ÷óäî áóäåò ïîñëå ïåðåçàãðóçêè :)
âåçäå áóäåò 140c
07-05-2011, 09:05
Anubis_OD

1 Attachment(s)

Quote:

Originally Posted by ConstAntz

íàèòèå ïîäñêàçûâàåò: CDMA-øíûå äîëæíû áûòü íà 140b

2 Anubis_OD, åùå îäíî ÷óäî áóäåò ïîñëå ïåðåçàãðóçêè :)
âåçäå áóäåò 140c

Ïîñìîòðåë VID/PID ïðîãðàìêîé USBView íà Win7 32b. Òàê òàì ìîäåì 12d1:140c.
Íî â èñòîðèè åñòü òî, ÷òî 30 àïðåëÿ ÿ åãî ïîäêëþ÷àë è áûëî 12d1:1446.
íà âñÿê ñëó÷àé ïðîâåðèë - Ìîäåì êîíåêòèòñÿ ðîäíîé ïðîãîé è âñ¸ ðàáîòàåò íîðìàëüíî. Â àòòà÷å ëîã òîãî, ÷òî ïðîãà íàøëà íà íåòáóêå ñ ïîäêëþ÷åííûì ìîäåìîì.
Ìîã PID êàê-òî èçìåíèòñÿ?
Attachment 8011
08-05-2011, 22:11
dlukanidin

Quote:

Originally Posted by Anubis_OD

Ïîñìîòðåë VID/PID ïðîãðàìêîé USBView íà Win7 32b. Òàê òàì ìîäåì 12d1:140c.
Íî â èñòîðèè åñòü òî, ÷òî 30 àïðåëÿ ÿ åãî ïîäêëþ÷àë è áûëî 12d1:1446.
íà âñÿê ñëó÷àé ïðîâåðèë - Ìîäåì êîíåêòèòñÿ ðîäíîé ïðîãîé è âñ¸ ðàáîòàåò íîðìàëüíî. Â àòòà÷å ëîã òîãî, ÷òî ïðîãà íàøëà íà íåòáóêå ñ ïîäêëþ÷åííûì ìîäåìîì.
Ìîã PID êàê-òî èçìåíèòñÿ?
Attachment 8011

Äëÿ ýòîãî ìîäåìà íàäî óñòàíàâëèâàòü âðó÷íóþ òèï CDMA.
Âñå îñòàëüíûå ïàðàìåòðû óñòðîéñòâà ìîæíî îñòàâèòü òå, êîòîðûå îïðåäåëÿòñÿ ïî usb loc.
Åñëè ÷òî-òî íå ïîëó÷àåòñÿ âûêëàäûâàéòå ëîãè (ñì. WIKI èç ïîäïèñè).
17-05-2011, 17:35
LastLeader

Òà æå ïðîáëåìà ñ EC122. Ñàìîå èíòåðåñíîå ÷òî ó ìåíÿ åñòü åùå ZTE (×åðåç êîòîðûé ÿ ñåé÷àñ â íåòå) è îí ñ òîé æå êàðòî÷êîé (è íàñòðîéêàìè) ðàáîòàåò îòëè÷íî.
Âêëþ÷àþ EC122, ìàðøðóòèçàòîð ïîêàçûâàåò ÷òî ïîäêëþ÷åíèå åñòü. À èíòåðíåò òîëè åñòü òîëè íåò íå ïîíÿòíî. Ãðóçèò ïî íåìíîãî íî ñ ãëþêàìè. Ëîãè íèæå:

Code:

Calling CDMA/EVDO ATZ OK ATDT#777 ^HRSSILVL:40 ^HDRRSSI: 20 Failed Script /tmp/ppp/peers/chat.sh finished (pid 169), status = 0x3 Connect script failed Calling CDMA/EVDO ~Failed (~) <<< chat.sh >>> Modem session is up, force reconnect Script /tmp/ppp/peers/chat.sh finished (pid 175), status = 0x0 Serial connection established. using channel 1 Using interface ppp0 Connect: ppp0 <--> /dev/usb/tts/0 sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x3 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x4 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x5 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x6 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x6 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0x7 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x7 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x8 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x8 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0x9 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x9 <pcomp> <accomp>] rcvd [LCP ConfReq id=0xa <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0xa <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0xb <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0xb <pcomp> <accomp>] rcvd [LCP ConfReq id=0xc <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0xc <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0xd <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0xd <pcomp> <accomp>] rcvd [LCP ConfReq id=0xe <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0xe <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0xf <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0xf <pcomp> <accomp>] rcvd [LCP ConfReq id=0x10 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x10 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0x11 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x11 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x12 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x12 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0x13 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x13 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x14 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x14 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>] rcvd [LCP ConfReq id=0x15 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x15 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x16 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x16 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] LCP: timeout sending Config-Requests Connection terminated. Modem hangup Calling CDMA/EVDO ~Failed (~) <<< chat.sh >>> Modem session is up, force reconnect Script /tmp/ppp/peers/chat.sh finished (pid 181), status = 0x0 Serial connection established. using channel 2 Using interface ppp0 Connect: ppp0 <--> /dev/usb/tts/0 sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>] rcvd [LCP ConfReq id=0x17 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x17 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x18 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x18 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>] rcvd [LCP ConfReq id=0x19 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x19 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x1a <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x1a <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>] rcvd [LCP ConfReq id=0x1b <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x1b <pcomp> <accomp>] rcvd [LCP ConfReq id=0x1c <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x1c <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>] rcvd [LCP ConfReq id=0x1d <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x1d <pcomp> <accomp>] rcvd [LCP ConfReq id=0x1e <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x1e <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>] rcvd [LCP ConfReq id=0x1f <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x1f <pcomp> <accomp>] rcvd [LCP ConfReq id=0x20 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x20 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>] rcvd [LCP ConfReq id=0x21 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>] sent [LCP ConfRej id=0x21 <pcomp> <accomp>] rcvd [LCP ConfAck id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>] rcvd [LCP ConfReq id=0x22 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP ConfAck id=0x22 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>] sent [LCP EchoReq id=0x0 magic=0x358e8250] rcvd [CHAP Challenge id=0x1 <cf17a80044d123f5bee3fd702e898a17>, name = ""] sent [CHAP Response id=0x1 <98d5cf14403733f2e7f6362b413fd51c>, name = "80922028040@people.net.ua"] rcvd [LCP EchoRep id=0x0 magic=0x9e1b468f] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 <mppe -H -M -S -L -D +C> <deflate 15> <deflate(old#) 15>] sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] rcvd [IPCP ConfReq id=0x1 <addr 77.109.0.225>] sent [IPCP ConfAck id=0x1 <addr 77.109.0.225>] rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 12 12 06 00 00 00 01 1a 04 78 00 18 04 78 00] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1 <addr 109.167.15.178> <ms-dns1 77.109.1.8> <ms-dns2 77.109.1.9>] sent [IPCP ConfReq id=0x2 <addr 109.167.15.178> <ms-dns1 77.109.1.8> <ms-dns2 77.109.1.9>] rcvd [IPCP ConfAck id=0x2 <addr 109.167.15.178> <ms-dns1 77.109.1.8> <ms-dns2 77.109.1.9>] local IP address 109.167.15.178 remote IP address 77.109.0.225 primary DNS address 77.109.1.8 secondary DNS address 77.109.1.9 Script /tmp/ppp/ip-up started (pid 188) Script /tmp/ppp/ip-up finished (pid 188), status = 0x0 System time change detected.
04-07-2011, 12:06
Sotger

EC168

Quote:

Originally Posted by psvd

äîáàâèòü ïîääåðæêó ìîäåìà huawei EC168 îò Peoplenet

Âûëîæèòå ïîæàëóéñòà ãîòîâûå êîíôèãè ïîä ìîäåì EC168!!
04-06-2012, 20:12
Warlok

dir320+CDMA peoplenet ZTE AC8710+ïîñëåäíÿÿ îëåãîâñêàÿ ïðîøèâêà.
âñå ðàáîòàåò, êîííåêòèòñÿ, íî åñëè ïîäêëþ÷èòü ìîäåì ê êîìïó îí âûäàåò 1,5-2 ìåãàáèòà ñòàáèëüíî. ÷åðåç ðîóòåð íå áîëåå 30 êèëîáàéò â ñåêóíäó
÷å äåëàòü?
05-06-2012, 13:31
dimez

Quote:

Originally Posted by Warlok

dir320+CDMA peoplenet ZTE AC8710+ïîñëåäíÿÿ îëåãîâñêàÿ ïðîøèâêà.
âñå ðàáîòàåò, êîííåêòèòñÿ, íî åñëè ïîäêëþ÷èòü ìîäåì ê êîìïó îí âûäàåò 1,5-2 ìåãàáèòà ñòàáèëüíî. ÷åðåç ðîóòåð íå áîëåå 30 êèëîáàéò â ñåêóíäó
÷å äåëàòü?

À åñëè èñïîëüçîâàòü ïîäâàðèàíò ïðîøèâêè îò ýíòóçèàñòîâ îò Vampik?
Âñ¸-òàêè îëåãîâñêàÿ î÷åíü ñòàðàÿ óæå.
01-09-2012, 18:52
WhistlerWCT

1 Attachment(s)

Ïðîáëåìà ñ 3G ìîäåìîì Novatel U727 ïîä PeopleNet.
Ìîäåì â ïåðå÷íå ïîääåðæèâàåìûõ óñòðîéñòâ óêàçàí.
Ìîäåì âèäèòñÿ â èíòåðôåéñå ðîóòåðà êàê Model name: Novatel Wireless CDMA. Â ñïèñêå ìîäåëåé íàïðÿìóþ îòñóòñòâóåò, óñòàíàâëèâàþ â AUTO.
Ñâÿçü íå óñòàíàâëèâàåòñÿ. Ëîã ïðèëàãàþ.Attachment 9264

Show 40 post(s) from this thread on one page