Printable View
STOP!Quote:
Originally Posted by Egres
Which firmware version?
Do you use the firmware internal samba or the ipkg-installed version?
If firmware: This will not work with xinetd at the moment. You will have to wait for the New Version of my HowTo or have a look at the german version, which is already up to date.
If ipkg: NEVER activate the webinterface-samba.
wengi
Hi Wengi!
Thx for this nice tutorial!
Almost everything is working fine. :)
I build up this all on a WL-500gP and this is my router as well.
I have done the NAT-Virtual Server ( 192.168.1.1 65534 port) on the router .
I can not set up the Upnp nor the NAT for Transmission.
Apr 14 18:50:04 transmissiond[192]: Transmission daemon 1.05+ (5051) started - http://transmission.m0k.org/ at port 65534
Apr 14 18:55:18 transmissiond[192]: Port Mapping (NAT-PMP): If your router supports NAT-PMP, please make sure NAT-PMP is enabled!
Apr 14 18:55:18 transmissiond[192]: Port Mapping (NAT-PMP): NAT-PMP port forwarding unsuccessful, trying UPnP next
Apr 14 18:55:18 transmissiond[192]: Port Mapping (UPNP): upnpDiscover returned NULL (errno 2 - No such file or directory)
Apr 14 18:55:18 transmissiond[192]: Port Mapping (UPNP): UPNP_GetValidIGD failed. (errno 0 - Success)
Apr 14 18:55:18 transmissiond[192]: Port Mapping (UPNP): If your router supports UPnP, please make sure UPnP is enabled!
This is the log for the error.
Today I got another error message:
[admin@PSQ10 root]$ cron
cron: can't lock /opt/var/run/cron.pid, otherpid may be 161: Resource temporarily unavailable
So now I have no cron running in the backround.
My firmware release : 1.9.2.7-8
Can U help me what did I wrong?
Thanks in advance:
MrPeeth
Hi,
i am not sure if upnp will work properly on the asus itself... no experience.
Simply open that port in the firewall and disable upnp.
Is the cron error permanent?
It seems that cron coulnd not write to /opt/var/run. Thats strange...
wengi
I still have a problem with mkdir /opt/tmp
This is after df :
after mkdir /opt/tmp:Code:$ df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 2944 2944 0 100% /
/dev/discs/disc0/part1 195307264 128 195307136 0% /tmp/harddisk
/dev/discs/disc0/part2 3212240 65628 2983440 2% /tmp/harddisk/part1
What am I doing wrong?Code:
mkdir: Cannot create directory `/opt/tmp': Read-only file system
Hi Wengi,
I restarted the router and cron displayed this error message:
Apr 17 19:21:30 /opt/sbin/cron[158]: (CRON) STARTUP (V5.0)
Apr 17 19:21:30 /opt/sbin/cron[158]: (*system*) BAD FILE MODE (/opt/etc/crontab)
I guess you I right!
What should I do?
thx:
MrPeeth
Hi!
Now I got this error:
mount: Mounting /dev/discs/disc0/part2 on /opt failed: No such file or directory
mount: Mounting /dev/discs/disc0/part3 on /tmp/harddisk failed: No such file or directory
swapon: Can't stat '/dev/discs/disc0/part1': No such file or directory
/usr/local/sbin/post-boot: /usr/local/sbin/post-boot: 45: /opt/etc/init.d/rc.unslung: not found
/usr/local/sbin/post-boot: /usr/local/sbin/post-boot: 48: /opt/etc/init.d/S10cron: not found
/usr/local/sbin/post-boot: /usr/local/sbin/post-boot: 49: transmission_watchdog: not found
/usr/local/sbin/post-boot: /usr/local/sbin/post-boot: 50: /opt/etc/init.d/S80busybox_httpd: not found
/usr/local/sbin/post-boot: /usr/local/sbin/post-boot: 51: /opt/etc/init.d/S10xinetd: not found
[admin@PSQ10 root]$
I guess it means something strange. :confused::eek:
I know the datas are in safe on the HDD but the config?
Thanks for any help:
MrPeeth
@funmen:
your mount points are wrong.
Check for the mount for /opt in post-boot!
@MrPeeth
same for you. It seems your /opt is not mounted.
have a look at "mount" and your post-boot.
wengi
@ALL
I started to review the whole tut. Do NOT use it at the moment.
This will take some days.
wengi
Hi wengi
i have a problem with swap mounting
[serge@ASUS root]$ mount -a
mount: Mounting /dev/discs/disc0/part1 on none failed: No such file or directory
#device Mountpoint FStype Options Dump Pass#
/dev/discs/disc0/part1 none swap sw 0 0
/dev/discs/disc0/part2 /opt ext3 rw,noatime 1 1
/dev/discs/disc0/part3 /tmp/mnt/disc0_3 ext3 rw,noatime 1 1
[serge@ASUS root]$ fdisk -l
Disk /dev/scsi/host0/bus0/target0/lun0/disc: 2021 MB, 2021654528 bytes
63 heads, 62 sectors/track, 1010 cylinders
Units = cylinders of 3906 * 512 = 1999872 bytes
Device Boot Start End Blocks Id System
/dev/scsi/host0/bus0/target0/lun0/part1 1 257 501890 82 Linux swap
/dev/scsi/host0/bus0/target0/lun0/part2 258 514 501921 83 Linux
/dev/scsi/host0/bus0/target0/lun0/part3 515 1010 968688
83 Linux
and mounting partition 3 to /tmp/harddisk in fstab ignored at boot and set to /tmp/mnt/disc0_3
Thanks a lot for this tutorial, I have no Linux experience, so would never have succeded in setting up my WL500gP without this tutorial.
Had one or two problems though, first time around it wouldn't activate my swap automatically, but started over from scratch and it worked. Don't know what I did wrong.
Another problem was really weird though, when rebooting the router it would hang, and I discovered that it was writing an endless log file to /opt/var/log/message.0, it would simply carry on till my disk was full. I solved it by removing the link to the original syslog and prevent it from copying content between the two.
wengi I have installed on new asus wl-500gp v2 a version 10 of oleg's firmware.
I have used the deutsche HowTo to config the router.
I have actived from web interface (internal samba) the Samba.
In "Samba File Share" i've selected "All Partition", in "Default Access Level" I've selected "Read/Write" and, finally, I've imposted hostname adn workgroup.
Samba doen't work. If I try to find the share from my PC I get error.
I've tried to active the internal FTP. FTP doe'nt work!
If I type
ps xaf
I don't see in process list neither smb neither vsftpd
Can you help me?
Hi. I had the same problem but did not solve it yet. When I reboot it is fine but when I save to flash, commit and reboot (with appriopriate command) then I have the same issue. The drive is being filled in with the message.0 file (opt/var/log/) However I can't reslove that issue. I removed the 'executable' flag from /usr/local/sbin/pre-shutdown but I dont't think it helped...Quote:
Originally Posted by Znake
Also I cannot connect to my samba with WinXp. When I go to the network neighbourhood or put the IP directly, my winxp opens the window with login to the guest account and pass. Whatever I put as a pass it won;t work. Can you help?
PS.
Nevertheless many thanks to Wengi for a great guide! :D
Problem could be in init startup script of syslogd.
This issue comes if you use the old syslog config with the new rc.unslung.
be sure you have both the newest version.
wengi
Thanks for the answer. Will try to update as soon as I get back home from work. Which also reminds me of another issue. Can someone please tell me where (or how) I can open port 22 for SSH so I can login from anywhere?
Also the issue with WinXP asking for password - anyone?
EDIT:
I found the answer for the SSH ine the forum - sorry for being so lame ;) Should've checked earlier :)
I have the same problem but have no idea what to do... :) I followed the steps as you writed down, so i guess there is the source of the problem. could you tell me what should i do now to make it work?Quote:
Originally Posted by wengi
Hi,
@ALL:
The HowTo is updated!! Please double check if your installation is up to date before posting requests here!
Have an eye on rc.unslung and startup scripts! They changed!!!
@ mrbazsee, yarosh, sarlacc, Garluk and others:
Your problems are a result of a not working HowTo version.
There was a reason why i stated the review status in bold red at the beginning of the howto until today ;-)
wengi
EDIT: Please report if you have problems by following the HowTo from scratch! There may still be failures..
Wengi, thumbs up for your great work! I will try to follow your new tut one of the following days and report back if there is anything not working.
Thanks again!
May the force be with you http://www.redhotsweeps.com/forum/im...ies/hae_73.gif http://www.redhotsweeps.com/forum/im...ies/hae_61.gif
wengi
Hi all,
I have installed Olegs Firmware 1.9.2.7-9 to my router. After reboot the router starts and web interface for configuration is running and reachable. I have installed dropbear and startet it. After this I worked with Putty in order to do the rest of my configuration. Internet access is ok, DNS is working. I have partinioned my disk to 512MB swap and rest for a share.
I tried to mount both partitions without success.
[root@WL500GP etc]$ mount -a
mount: Mounting /dev/discs/disk0/part1 on none failed: No such file or directory
mount: Mounting /dev/discs/disk0/part2 on /opt failed: No such file or directory
I tried to create necessary subdirectories but I got:
Cannot create directory
What did I wrong?
See System log:
Jan 1 01:00:06 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 01:00:06 kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:06 kernel: usb.c: registered new driver usb-storage
Jan 1 01:00:06 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:06 kernel: Vendor: SAMSUNG Model: SP2514N Rev: 0811
Jan 1 01:00:06 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 01:00:06 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Jan 1 01:00:06 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Jan 1 01:00:06 kernel: Partition check:
Jan 1 01:00:06 kernel: p1 p2
Jan 1 01:00:06 kernel: USB Mass Storage support registered.
Jan 1 01:00:07 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
May I ask for for help?
Thanks in advance,
Thomas
Are the partitions formated?
Do an e2fsck on the partitions.
If this does not help: give us some infos:
wengiCode:fdisk -l
free
mount
Wengi,Quote:
Originally Posted by wengi
thanks a lot for your quick feedback. I resolved the problem. I have formatted the disk with Partition Expert and tried to mount it without access. After a lot of trials (disk was identified and available under /dev/ide/host0/bus0/target0/lun0/partx,y,z but not mountable) I decided to re-partition the disk but this time using fdisk. After that I was able to mount all partitions execpt the biggest share which should be mounted to /tmp/harddisk via symbolic link from /tmp/mnt/disc0_6. ---strange behavior---
I did a ln -s /...... created the link and all partitions are working now.
Your tutorial said "If you allready partitioned your HDD as you want (incl. swap) go to the next chapter." ..... but I think this is not possible in all cases.
Let me thank you also for your great tutorial and your feedback.
Have a great and successful day.
BR, Thomas
Hi,
good to know it works.
I will mention this in the howto.
wengi
Hi all,
i edited the xinetd part and will do some more changes within the next days.
The problem is the file S10xinetd because it does not support the start|stop feature of rc.unslung.
Check your config if you are using xinetd.
wengi
thanks for the tut.
all working. web interface is slow for me...
anyone got samba and osx talking?
Nice tutorial, but now transmission is bringing the cpu to 100%.
Every time I operate on the web interface I have a new "transmission.cgi" and "busybox_httpd" between my tasks:
Code:top - 00:58:44 up 12 min, 0 users, load average: 1.94, 1.38, 0.73
Tasks: 34 total, 3 running, 31 sleeping, 0 stopped, 0 zombie
Cpu(s): 96.3% user, 3.7% system, 0.0% nice, 0.0% idle
Mem: 13964k total, 12580k used, 1384k free, 812k buffers
Swap: 506008k total, 1504k used, 504504k free, 5124k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
274 admin 19 0 596 592 576 R 46.9 4.2 1:21.32 transmission.cg
244 admin 20 0 588 532 516 R 46.6 3.8 9:15.94 transmission.cg
279 admin 17 0 672 672 508 R 6.0 4.8 0:00.45 top
67 admin 9 0 480 400 376 S 0.3 2.9 0:00.73 watchdog
214 admin 9 0 644 560 492 S 0.3 4.0 0:03.24 dropbear
1 admin 8 0 472 336 336 S 0.0 2.4 0:02.58 init
2 admin 9 0 0 0 0 S 0.0 0.0 0:00.01 keventd
3 admin 18 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd_CPU0
5 admin 9 0 0 0 0 S 0.0 0.0 0:00.00 bdflush
6 admin 9 0 0 0 0 S 0.0 0.0 0:00.00 kupdated
59 admin 9 0 436 336 332 S 0.0 2.4 0:00.00 udhcpc
60 admin 9 0 0 0 0 S 0.0 0.0 0:00.00 khubd
52 admin 9 0 412 344 288 S 0.0 2.5 0:00.02 httpd
69 admin 8 0 384 300 264 S 0.0 2.1 0:00.05 ntp
76 admin 9 0 400 316 312 S 0.0 2.3 0:00.01 dropbear
93 admin 9 0 0 0 0 S 0.0 0.0 0:00.02 kjournald
4 admin 9 0 0 0 0 S 0.0 0.0 0:00.09 kswapd
96 admin 9 0 888 708 588 S 0.0 5.1 0:00.14 nmbd
98 admin 9 0 744 424 424 S 0.0 3.0 0:00.00 smbd
7 admin 9 0 0 0 0 S 0.0 0.0 0:00.48 mtdblockd
46 admin 9 0 312 244 236 S 0.0 1.7 0:00.01 telnetd
139 admin 9 0 400 312 304 S 0.0 2.2 0:00.01 busybox_httpd
57 admin 9 0 364 300 292 S 0.0 2.1 0:00.10 klogd
217 admin 9 0 1692 1632 1292 S 0.0 11.7 0:00.28 transmissiond
220 admin 9 0 1692 1632 1292 S 0.0 11.7 0:00.00 transmissiond
221 admin 9 0 1692 1632 1292 S 0.0 11.7 0:00.10 transmissiond
222 admin 9 0 556 552 424 S 0.0 4.0 0:00.51 sh
230 admin 9 0 452 404 356 S 0.0 2.9 0:00.02 busybox_httpd
231 admin 9 0 588 584 568 S 0.0 4.2 0:00.34 transmission.cg
94 admin 9 0 0 0 0 S 0.0 0.0 0:00.01 kjournald
255 admin 9 0 452 408 356 S 0.0 2.9 0:00.03 busybox_httpd
256 admin 9 0 596 592 576 S 0.0 4.2 0:00.35 transmission.cg
124 admin 9 0 400 332 304 S 0.0 2.4 0:00.02 syslogd
130 admin 9 0 408 376 352 S 0.0 2.7 0:00.01 cron
Any idea?Code:[admin@WL-HDD root]$ ps axf
PID TTY STAT TIME COMMAND
1 ? S 0:02 /sbin/init
2 ? S 0:00 [keventd]
3 ? SN 0:00 [ksoftirqd_CPU0]
4 ? S 0:00 [kswapd]
5 ? S 0:00 [bdflush]
6 ? S 0:00 [kupdated]
7 ? S 0:00 [mtdblockd]
46 ? S 0:00 telnetd
52 ? S 0:00 httpd
57 ? S 0:00 klogd
59 ? S 0:00 udhcpc -i br0 -p /var/run/udhcpc_lan.pid -s /tmp/landhcpc
60 ? S 0:00 [khubd]
67 ? Ss 0:00 watchdog
69 ? Ss 0:00 \_ ntp
76 ? S 0:00 dropbear
214 ? Ss 0:03 \_ dropbear
222 pts/0 Ss 0:00 \_ -sh
278 pts/0 R+ 0:00 \_ ps axf
93 ? S 0:00 [kjournald]
94 ? S 0:00 [kjournald]
96 ? Ss 0:00 /usr/sbin/nmbd -D
98 ? Ss 0:00 /usr/sbin/smbd -D
124 ? S 0:00 /sbin/syslogd -m 0 -O /opt/var/log/messages.log -S -l 6 -s 0
130 ? Ss 0:00 /opt/sbin/cron
139 ? S 0:00 /usr/sbin/busybox_httpd -c /opt/etc/httpd.conf -p 8008 -h /opt/share/www
230 ? S 0:00 \_ /usr/sbin/busybox_httpd -c /opt/etc/httpd.conf -p 8008 -h /opt/share/www
231 ? S 0:00 | \_ /bin/sh /opt/share/www/cgi-bin/transmission.cgi
244 ? R 8:59 | \_ /bin/sh /opt/share/www/cgi-bin/transmission.cgi
255 ? S 0:00 \_ /usr/sbin/busybox_httpd -c /opt/etc/httpd.conf -p 8008 -h /opt/share/www
256 ? S 0:00 \_ /bin/sh /opt/share/www/cgi-bin/transmission.cgi
274 ? R 1:05 \_ /bin/sh /opt/share/www/cgi-bin/transmission.cgi
217 ? Ss 0:00 transmissiond -p 65534 --nat-traversal -e -w 300 -u 10 -d -1 -i /opt/var/run/transmission.pid /tmp/harddisk/torrent/active-torrents.txt
220 ? S 0:00 \_ transmissiond -p 65534 --nat-traversal -e -w 300 -u 10 -d -1 -i /opt/var/run/transmission.pid /tmp/harddisk/torrent/active-torrents.txt
221 ? S 0:00 \_ transmissiond -p 65534 --nat-traversal -e -w 300 -u 10 -d -1 -i /opt/var/run/transmission.pid /tmp/harddisk/torrent/active-torrents.txt
[admin@WL-HDD root]$
There is a prob with transmission.cgi hanging after loading some kb of the webinterface.
I didnt solve this until now because i have no idea where to start from.
If you use ctrl+c to exit lynx or close your browser the transmission.cgi is hanging and using 100% CPU.
killall transmission.cgi
will help...
wengi
PS: The download itself is working normaly...
I know that the download is working fine, but without a web interface it is impossible to choose something to download and so on.
Are you using a different web interface for transmission?
No. i am using the command line atm.
But i am going to post a thread for this.
wengi
Hi,
there was a change in S05syslog:
Loglevel has to be 7 for transmission to log properly
please check:wengiCode:OPTIONS="-m 0 -O $LOG_NEW/$LOGFILE -S -l 7 -s 0"
Hi Wengi,
Please look at this piece from your startup script for syslog:
If you REALLY want the name messages for syslog you need to use:Code:# Startup script for syslog
...
LOGFILE=messages.log
KERNLOGFILE=kern.log
LOG_OLD=/tmp
LOG_NEW=/opt/var/log
...
# Copy old syslog and create symlink to new
if [ ! -L /tmp/syslog.log ]; then
cat $LOG_OLD/$LOGFILE >> $LOG_NEW/$LOGFILE
mv $LOG_OLD/$LOGFILE $LOG_NEW/$KERNLOGFILE
ln -s $LOG_NEW/$LOGFILE $LOG_OLD/$LOGFILE
fi
...
LOGFILE_OLD=syslog.log
LOGFILE_NEW=messages.log
But IMHO LOGFILE=syslog.log is an better approach!
Otherwise, many thanks for your work in community service... :D
Hi,
you are right. And logrotate also had the wrong filename.
I changed both to syslog.log.
messages was for historical reasons and transmission....
wengi
Yes I know, I'm still searching for logs in /var/adm/messages... ;)Quote:
Originally Posted by wengi
Hi..
I think transmission is very slow downloadind..
Is it only possible to download one torrent at the time??
No,
you can download multiple torrents at the same time.
check your conf file.
wengi
USB stick not found
I installed last ver of Oleg fw..i schoose the steps to install dropbear..everything was ok..
1.i insert the USB stik, after i connected the cord extension..and i was wondering why doesn't blinck the stick..the led isn't show me that is worrking..
2.i wanna make partitions via a test stick with 256 mb..but i can't do fdisk cause i can't see the disk.. df show me only 3008..or some..not usb stick
what should i do?
p.s...samba and ftp disabled..as it should ...!:confused:
Hi,
which hardware are you using?
please post results of
This will show if the usb modules are loaded and which discs are known.Code:lsmod
ls -la /dev/discs
Also check your syslog for usb-specific entries.
wengi
hello wengi, I used your tutorial already a few months back ago.
because I saw you changed some stuff, I tried to set up the way you did it.
I noticed after a reboot that nothing was mounted for some reason and that's why I made a mix of your new how-to and old one.
it's working fine now, exept for 1 thing:
this thing is coming up every time I start a reboot, or just randomly.Quote:
1096 root 32 R cat /tmp/syslog.log
it uses almoast 100% of the cpu and writes full my whole /opt :eek:
I have 4gb of /opt space, but it just keeps writing till it has more than 3.5gb!
check your /opt/etc/init.d/S05syslogd and use the new version.
I do NOT recommend a mix of old and new files/configurations!!!
wengi
So where do I get this new syslog from? till I used your old boot version I had no problems, the only thing I touched the couple of days is the boot section.Quote:
Originally Posted by wengi
also /usr/local/sbin/post-mount is NOT executed at boot, while it's executable.
therefor I use post-boot with the old startupscript.
also your newer boot files don't contain the drobear start neither does it contain the scsi mod to start usb drives :rolleyes:
EDIT:
never mind about the syslog, I found it:p