[HowTo] Install and configure Oleg's firmware

Printable View

Show 40 post(s) from this thread on one page

20-11-2007, 23:38
apostrophe

wengi

I've reinstalled everything and xinetd is now running and using SWAT 'Status' page I can see smbd is 'running' and nmbd 'not running'.

log.nmbd shows

[2007/11/20 23:08:32, 0] source/nmbd/nmbd.c:main(795)
Netbios nameserver version 2.2.12 started.
Copyright Andrew Tridgell and the Samba Team 1994-2002
[2007/11/20 23:08:32, 0] source/lib/charset.c:load_client_codepage(213)
load_client_codepage: filename /opt/lib/codepages/codepage.850 does not exist.
[2007/11/20 23:08:32, 0] source/lib/util_unistr.c:load_unicode_map(617)
load_unicode_map: filename /opt/lib/codepages/unicode_map.850 does not exist.
[2007/11/20 23:08:32, 0] source/lib/util_unistr.c:load_unicode_map(617)
load_unicode_map: filename /opt/lib/codepages/unicode_map.ISO8859-1 does not exist.
[2007/11/20 23:08:36, 0] source/nmbd/nmbd_responserecordsdb.c:find_response_record(235)
find_response_record: response packet id 30649 received with no matching record.

When I try to browse with XP explorer I see 'ASUS' under MSHOME but when I try to browse I get '\\ASUS is not accessible' message.

Thanks :)
21-11-2007, 07:58
wengi

Hi,

the files of the codepages are missing. Very strange!
Here is the listing of my codepages:

Code:

[admin@blechbuechse /]$ ls /opt/lib/codepages/ total 3708 drwxr-xr-x 2 admin root 4096 Feb 25 2007 . drwxr-xr-x 18 admin root 8192 Nov 5 08:37 .. -rw-r--r-- 1 admin root 588 Feb 23 2007 codepage.1125 -rw-r--r-- 1 admin root 140 Feb 23 2007 codepage.1251 -rw-r--r-- 1 admin root 196 Feb 23 2007 codepage.437 -rw-r--r-- 1 admin root 148 Feb 23 2007 codepage.737 -rw-r--r-- 1 admin root 388 Feb 23 2007 codepage.775 -rw-r--r-- 1 admin root 132 Feb 23 2007 codepage.850 -rw-r--r-- 1 admin root 172 Feb 23 2007 codepage.852 -rw-r--r-- 1 admin root 132 Feb 23 2007 codepage.857 -rw-r--r-- 1 admin root 460 Feb 23 2007 codepage.861 -rw-r--r-- 1 admin root 588 Feb 23 2007 codepage.866 -rw-r--r-- 1 admin root 8 Feb 23 2007 codepage.932 -rw-r--r-- 1 admin root 8 Feb 23 2007 codepage.936 -rw-r--r-- 1 admin root 8 Feb 23 2007 codepage.949 -rw-r--r-- 1 admin root 8 Feb 23 2007 codepage.950 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.1125 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.1251 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.437 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.737 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.775 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.850 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.852 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.857 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.861 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.866 -rw-r--r-- 1 admin root 262174 Feb 23 2007 unicode_map.932 -rw-r--r-- 1 admin root 262174 Feb 23 2007 unicode_map.936 -rw-r--r-- 1 admin root 262174 Feb 23 2007 unicode_map.949 -rw-r--r-- 1 admin root 262174 Feb 23 2007 unicode_map.950 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.ISO8859-1 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.ISO8859-13 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.ISO8859-15 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.ISO8859-2 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.ISO8859-5 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.ISO8859-7 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.ISO8859-9 -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.KOI8-R -rw-r--r-- 1 admin root 131614 Feb 23 2007 unicode_map.KOI8-U

Please recheck these files on your system.

Also post the result of

Code:

cat /opt/etc/ipkg.conf

wengi
21-11-2007, 13:57
zheka_ppp

My /opt/lib/codepages/ is emtpy too.
Where can I find all this codepage files ? I use samba3.
23-11-2007, 00:34
apostrophe

wengi

I do not know what I did different but I cleared everything and started again. Samba2 and everything else is working. I will move onto Transmission soon once the samba drive is fully configured. Thank you for your advice and patience.

:D
23-11-2007, 09:40
wengi

Quote:

Originally Posted by zheka_ppp

My /opt/lib/codepages/ is emtpy too.
Where can I find all this codepage files ? I use samba3.

I have no idea about smaba 3. Dont use it. But a reinstall should fix it _if_ these files are in the ipkg package.

wengi

EDIT:
You can download the ipkg package and extract it. Windows: e.g. use Winrar
24-12-2007, 11:22
wengi

Update to oleg 1.9.2.7-8

Hi all,

i updated to the new Version of olegs firmware following chapter 16 of my howto.

One single problem:
My WL-HDD was not responding after step 4. So i pulled the plug after 30 mins and then it worked fine.
Following my Howto after that and all went fine.

You need to substitute the real time clock driver!
The HowTo is updated.

wengi
27-12-2007, 09:14
Trailblazer

Thanks from Bill Gates

wengi,
Thanks so much for your tutorial! An MS Geek can't do it without the help of you and marcesium.

And Oleg, thanks for the great firmware. It's why I bought this router! :D
05-01-2008, 21:37
alex.bumbacea

how can i get a report daily about loggin hours on ssh?
06-01-2008, 09:07
Serpent

Simplest way is:
cat /tmp/syslog.log |grep dropbear
06-01-2008, 09:38
wengi

Hi,

only to correct it. The path to the log is different if you installed with my howto:

Code:

[admin@blechbuechse root]$ cat /opt/var/log/messages | grep -i dropbear Jan 1 01:00:08 post-boot: starting dropbear: Jan 1 01:00:08 dropbear[93]: Running in background Jan 6 10:24:47 dropbear[3496]: password auth succeeded for 'admin' from ::ffff:192.168.1.21:1148 [admin@blechbuechse root]$

wengi
06-01-2008, 10:05
al37919

wengi, it's a good idea to put a symlink:

PHP Code:

ln -s /opt/var/log/messages /tmp/syslog.log

Then you will be able to see log from the web-IF, and the above statements will be correct.
06-01-2008, 10:26
wengi

This is indeed a very good idea!!!
Didn't think about it until now.

Thanks :cool:

wengi
06-01-2008, 10:40
wengi

Hi all,

I made a little change in the syslog config.

There are two lines added to /opt/etc/init.d/S05syslogd:

Code:

# remove old syslog.log rm /tmp/syslog.log # add symlink so log is available at old location (e.g. for webinterface) ln -s /opt/var/log/messages /tmp/syslog.log /sbin/syslogd -m 0 -O /opt/var/log/messages -S -l 7

Background:

syslog is now linked to /tmp/syslog.log.
In result the syslog is viewable in the webinterface again.

Howto is updated
Thanks to al37919 for this.

wengi
10-01-2008, 23:09
velcrow

Hi Wengi,

Have just finished re-setting up my asus wlg500p with a USB WD Passport 250GB.

I wanted to replace the old USB harddisk (which worked for a year - no problems) with one that needed no external power supply.

Anyway, I was revisiting these forums and just wanted to thank you again for all your great posts - they are excellent!

Velcrow
11-01-2008, 07:51
wengi

Hi,

nice to hear that. Thank you ;)

wengi

Show 40 post(s) from this thread on one page