same problem here Oleg... :-/ (my driver is 7.21.1.3 digitally signed by Microsoft Windows Hardware Compatibility Publisher)
Printable View
same problem here Oleg... :-/ (my driver is 7.21.1.3 digitally signed by Microsoft Windows Hardware Compatibility Publisher)
Thanks the work for Oleg!!!!
This firmware work perfectly for me, but i have got one problem. Webcam drivers update: ov51x-1.65-1.12, pwc 9.0.2 (incl. compression and 640x480). But my newer Logitech sphere (ptz) can't work with this firmware (i buy this cam 130$).
Log: USB device 2 (vend/prod 0x46d/0x8c5) is not claimed by any active driver.
I read: Warning: This driver does not support these newer Logitech webcam:
Product Id Model
0x8C2 Logitech QuickCam PTZ (newer version of the sphere)
But i lokking for a newer driver and i find this: http://developer.berlios.de/projects/linux-uvc and i read the Linux UVC driver and tools know supported devices:
Device ID Name Manufacturer
046d:08c1 Logitech Quickcam Fusion Logitech
046d:08c2 Logitech Quickcam Orbit Logitech and etc....
I can't build-in the new driver in the firmware. And in really good for me this driver? I hope.
Oleg do you know this problem? And have you got any solution?
If you have, eternal thankfulness!!!!
WHQL does not guarantee anything...Quote:
Originally Posted by jimmy_cr
"This Project Has Not Released Any Files", sorry.Quote:
Originally Posted by Actre
I find UVC drive! Do you can use this?Quote:
Originally Posted by Oleg
know that, i'll test your older FW asap and i'll report... ;)Quote:
Originally Posted by Oleg
Hi all, is possilbe make with your firmware this:
WAN - as line from ISP (cable)
LAN and WIFI - on the same network, and using the same inner asus DHCP, WIFI in AP mode (connect for notebooks etc.), LAN port for other PCs.
Original firmware work as this (i think):
WAN and WIFI on the same network (?)
LAN with asus inner DHCP for clients, bud i need wifi for clients too, not for ISP, for ISP i have WAN port.
Thanks
yes, its standard "Home gateway" mode I think (System setup -> Operation mode) - I have set this at my home (PCs connected to LAN ports + my notebook connected via WiFi all of them getting IP from DHCP, internet connected to WAN port)Code:WAN = internet provider
LAN+Wifi = Local PCs
And what is the conclusion? :pQuote:
Originally Posted by jimmy_cr
lazy to downgrade FW, upgraded Marvell driver and everything seems to be okay...for now
strange, before was everything okay with old drivers... :)
Weird, when I updated the driver, it didn' t work. Which one did you download?Quote:
Originally Posted by jimmy_cr
Hi all,
Hi Oleg,
It looks like there is a little bug with security mode:
When the option is activated, the image file is attached in mail but this one is empty (0Kb). So unusable.
Working fine with official fw 1.9.5.0.
(wl500g in acces point mode - logitech 4000 pro webcam)
Finally a driver that works. Thanks. :DQuote:
Originally Posted by jimmy_cr
Hi
I cant get into the wl-500g anymore after i set it in AP mode.
And I cant reset it.
I think its the 1.9.2.7 rc7 i use
I have the 500g but with samba enable the usb 1.1 speed is not good.
To resolve this problem, I want to buy a 500g delux with 2 usb 2.0 port.
Two questions :
- With samba usb speed must be better ?
- I'm very happy with your firmware on my 500g, is it ok for 500g delux ?
I think there's separate firmware for WL500g Deluxe, also made by Oleg
Samba will probably work faster with Deluxe (faster "CPU", USB2.0), but not tested by me
It must be interesting to develop a raid 0 or 1 with wl500-g deluxe by using the two usb port ... :rolleyes:
And if you merge the BusyBox 1.2.1 (stable) ?
if you don't want to do this jump, and if you merge BusyBox 1.1.3 (stable) with lots of bugfix release like:
-makes passwd use salt, fixes a memory freeing bug in ls, fixes "build all sources at once" mode, makes mount -a not abort on the first failure, fixes msh so ctrl-c doesn't kill background processes, makes patch work with patch hunks that don't have a timestamp, make less's text search a lot more robust (the old one could segfault), and fixes readlink -f when built against uClibc.
-bug fix release consisting of 11 patches backported from the development branch: Some build fixes, several fixes for mount and nfsmount, a fix for insmod on big endian systems, a fix for find -xdev, and a fix for comm. Check the file "changelog" in the tarball for more info.
-etc..
Hi guys,
I wish to use Oleg's firmware because of the Samba feature.
I have tried to instal the 7e version on my WL500G Deluxe for several times now, but i cannot axcess the router because it is constantly rebooting itself (app. every 10 sec). Resetting doesn't work (button and diconecting power).
I don't know what to do anymore. Please help :confused:
Thanks
(Srry for my bad english, I'm dutch.)
Hi!
Since my connection speed has been raised from 2000 kBit/s to 6000 kBit/s I only get 1000 kBit/s downstream and about 180 kBit/s upstream. The WL500g is flashed with the current firmware v1.9.2.7CR7e. Everything worked fine with the line speed at 2000 kBit/s. Now, if I connect the pc directly to the Xentrix modem, I get full speed (6000/640). Connected to the router, I get the low speed either via WLAN and LAN. Changing the MTU/MRU in the router configuration didn't help. Disabling the Firewall didn't do it either.
Any suggestions?
Problem with the PPoE driver?
Do I have to buy a new router? :confused:
Thanks in advance.
Best Regards
hvonjomega
I flashed the current OLEG firmware for a second time
and restored factory settings. After entering ISP data
everything worked fine.
:)
I had the same problem at work with the Marvell NICs. We are using a netgear router, so this is not specific the WL500. What i did is install drivers from WindowsUpdate and since then all is fine !:)Quote:
Originally Posted by jimmy_cr
I've been away from the WL500g community for a while now.. What is Premium Support ?Quote:
Originally Posted by Oleg
Please use the 'Edit' button when replying repeatedly in a short time, thank you
Premium is a new version of the Deluxe router. It has 32 MB ram for example.Quote:
Originally Posted by max2950
Quote:
Originally Posted by HeatBreaker
did you try the Asus recovery stuff?
Many thanks for 7f, Oleg!
The USB speed-up is very welcome with my 500gx connected to my Topfield PVR.
I'm having some problems with changing the Samba configuration.
The config file is in /etc/smb.conf, but after changing it and rebooting the router it's set to the standards coming with the new oleg firmware. Even when saving the flash and committing it.
Also, with Samba I want to change the name that's shown in the network enverimont, from Samba etc. etc. to something like 'Router'.
Normal I would start samba with quote below, and that defines the name of the router.. Can I still change it somewhere now it's integrated?
Got any ideas?Quote:
/usr/sbin/smbd -D -l /opt/var/log/smbd.log -s /opt/etc/samba/smb.conf
/usr/sbin/nmbd -D -n Router -o -l /tmp -s /opt/etc/samba/smb.conf
Hi Oleg,
Just for the sake of it i tried to upgrade my wl500g (not de luxe) from 7e to 7f today.
I have reset the wl500g twice after the firmware upgrade, but NTP doesn't seem to work anymore.
The is no entry in the syslog file about ntp.
i am pointing to nl.pool.ntp.org which used to work fine.
I have not downgraded to 7e yet. I hope you can help to get it going without downgrading.
How can i test NTP? are there any other logs i can look at?
update:
-I flashed firmware 7f again. No improvement. still no sign of NTP
I also did a factory reset several times (5 sec. reset on the back of the unit until power led started rapidly flashing)
-I have downgraded to 7e now. NTP works without problem with the old firmware.
Can i conclude there is a problem in the 7f firmware?
Try to type flashfs save at the command prompt....Quote:
Originally Posted by Elect
no problem at wl-hdd..Quote:
Originally Posted by avberk
Quote:
Nov 8 18:36:16 ntp client: Synchronizing time with 130.149.17.21 ...
Hi Oleg,
Again thank you for your great work ! I just upgraded my router and noticed that if i try to upgrade through wireless the router drops the connection. Is this by design?
I was upgrading from 7e to 7f...
All went fine through cable connection....
Max2950: Never update your router via the wireless interface! I once tried that by mistake, and I had to use the firmware recovery mode to fix it...
I know i should not do that, but i was to lazy to get the cable... But for sure i will do it with the cable every time now. I was wondering if the fact that the wl500 drops the wireless during upgrade was by design.Quote:
Originally Posted by MMCM
Ok, i gave the f firmware a test run, and it runs like a charm. However, on my webcam the picture is still mirrored horizontally ....
I have a PHILIPS ToUcam FUN II (PCVC830K i guess ...)
Thanks Oleg for the new firmware, but i wanna ask you if its possible to do loadbalancing with the wl500g with two internetproviders?
Thanks,
I have the same problem. Have you set a time restrictionQuote:
Originally Posted by max2950
on wireless radio? Is NTP working?
Still my router out of nowhere when it's downloading 8 torrents or so. Resized my swapsize to 256 mb becouse the 60 mb's was too small..
The only other things that are running are the httpd server, stupid-ftpd and dropbear. Does anyone has a clue what it can be? Should I just stop downloading so many torrents? :(
[update]
Reinstalled everything. Still wondering what it is as the only thing that could bring it down is enhanced-ctorrent. Mine is a premium btw.
How can I turn the automounting off? I want my ipkg to use the /opt/tmp/ipkg folder, the rest is not writeable..
Quote:
USB storage: ext3 fs mounted to /tmp/harddisk
i have been looking around and carnt seem to find any firmwares for the WL-500g that have bandwith management that is IP based for uploading just like it is for downloading :(
is there any way that you could put this in?
i know port based is good BUT here in OZ all the main ISP's suck and only give us small U/L bandwith (i am on cable 10Mb down 128Kb up) and when the others in the house start any form of P2P the net stops i tryed to use the port shapeing but they just change the ports there useing and restart i dont mind them downloading but when it kills the connection because there is no U/L it sucks big time
i have allready set it up so there IP's are set from there MAC address so the IP shapeing would be grate
i know you do all of this work for free Oleg and it fantastic (been useing your firmware since you started doing it for wl500g) i amd i am sure that most of us here thank you grately
Adverse Effects