[HowTo] Sane Scanner-Server with XSane Frontend

Printable View

Show 40 post(s) from this thread on one page

15-12-2010, 11:25
FordPerfect

Brother DCP-7010

Does anyone know if there is a solution for my Brother DCP-7010 Multi Printer/Scanner?

sane-find-scanner returns the device but scanimage -L show up the default error/no device found message.

For sane-backends/i386 the brother2 shoud work external, but I do not understand how they mean that.. see
http://www.sane-project.org/lists/sa...tml#S-BROTHER2

Maybe I can use the Linux drivers from:
http://welcome.solutions.brother.com.../en/index.html ?

I would be very happy if somebody know a solution...

Regards

FordPerfect
13-01-2011, 03:20
DeniDoman

Hi all.

I have a problem with DIR-320 (Oleg's FW), Sane and MP540.

My English is bad and i can's tell you long story about usb-hub, flash-card formatting and other =)

So, after night of linux-adventures, i have:

sane-find-scanner : found USB scanner... (bla-bla-bla, all ok).
scanimage -L : device (bla-bla-bla) is a PIXMA MP540 multi-functional... (all good too).

But when i try:

scanimage -T
or
scanimage --format=tiff > /opt/backup/test.tiff

My scanner do nothing. He write "Scanning in process" on the display, but it's not work. In terminal i have:

Code:

[admin@(none) root]$ scanimage -T scanimage: scanning image of size 638x877 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 1914 bytes...

And nothing write when just scanimage --format=tiff > /opt/backup/test.tiff.

It is necessary to tell, that test.tiff is creating in folder, but have 0Kb size.

Somebody solve this problem?
16-01-2011, 08:41
AlexWolf

Quote:

Originally Posted by electropanda

Victory!
I can scan by HP PhotoSmart c5283 now.
I intently viewed the forum :) and solution was found:
http://wl500g.info/showpost.php?p=189850&postcount=108
I had the same symptoms as described in http://wl500g.info/showthread.php?t=20098.
I changed dbus from 1.2.16-1 to 1.1.1-3.

Thus I came to current working condition through installing the following packages:
libusb - 0.1.12-2
libtiff - 3.9.4-1
libjpeg - 6b-3
libieee1284 - 0.2.11-1
sane-backends - 1.0.21-1
cups - 1.4.4-1
dbus - 1.1.1-3 (from http://wl500g.info/showpost.php?p=202794&postcount=12)
hplip - 3.9.2-1 (from http://wl500g.info/showpost.php?p=199955&postcount=119)

Else.
I had to add one line into post-boot script.

Code:

rm /opt/var/run/dbus/*

During the router starting /opt/etc/init.d/S20dbus do not examine whether daemon has already started or not.
If there is PID file in /opt/var/run/dbus/ S20dbus suppose daemon has already started. To be sure it actually starts we need to remove PID file before S20dbus is execute.
(Idea was peeped here)

Many thanks to Oliver for the How-To (and for XSane too)!

Hi, All!
I've read this and follow recommendations. And it works now!
Router - Asus RT-N16
Firmware - 1.9.2.7-rtn-r2274
Scanner - HP psc 1350 all-in-one series (detected as "found USB scanner (vendor=0x03f0 [hp], product=0x3b11 [psc 1300 series]) at libusb:001:004" by sane-find-scanner utility and as "device `hpaio:/usb/psc_1300_series?serial=XXXXXXXXXXXX' is a Hewlett-Packard psc_1300_series all-in-one" by scanimage -L)
Backends - XSane on Ubutu 10.10 and the same on Win XP.

The main clues was in using old version of dbus. Some additional problem was in downgrading:

Code:

ipkg install -force-downgrade <downloaded package with old dbus version>

Also a little trouble was with username in config /opt/etc/xinetd.d/saned We have to use the same name that used to login to router (or any else that exist in /etc/passwd). Some people use their own usernames and alot of them use root instead of default admin user.
22-01-2011, 16:29
DeniDoman

I look at the webpage with printers and see:

PIXMA MP540
USB 0x04a9/0x1730
Complete
All resolutions supported (up to 2400DPI)
pixma (0.16.1)
sane-pixma

What does it mean? That i must download and compile sane-pixma? Or what?

***

Somebody has setup SANE with Canon MP540? And, maybe, somebody know forum, where i can take help?
02-02-2011, 10:21
larmoe01

HP PSC 1402

Hi

My scanner HP PSC 1402 (and before that PSC 2110) has been working flawless for a while, until I recently upgraded a couple of packages. Now it stalls when initiating the scanning process.
The scanner is recognized by saned

Code:

$ scanimage -L device `hpaio:/usb/PSC_1400_series?serial=CN62SDD28D04DZ' is a Hewlett-Packard PSC_1400_series all-in-one

Running "dmesg" after the scanner stalls puts out these additional lines:

Code:

$dmesg ... printer.c: usblp0: removed usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x87 len 6 ret -79 usb_control/bulk_msg: timeout

I’m still using the old version of dbus. As for the other applications here is the versions:

Code:

$ipkg list_installed |grep 'libusb\|libjpeg\|libtiff\|hplip\|dbus\|sane' dbus - 1.1.1-3 - dbus-glib - 0.82-1 - D-Bus Glib bindings hplip - 3.9.2-1 - libjpeg - 6b-3 - collection of jpeg tools libtiff - 3.9.4-1 - Tag Image File Format Libraries libusb - 0.1.12-2 - Library for interfacing to the USB subsystem. sane-backends - 1.0.21-1 - SANE is a universal scanner interface

I would appreciate any suggestions what could be wrong.
22-02-2011, 03:17
fondpiggy

Can HP Officejet J5788 all-in-one scanner use SANE?

I have a HP Officejet J5788 scanner. I want sharing it on openwrt box.

openwrt firmware: KAMIKAZE (bleeding edge, r19957)
scanner: HP Officejet J5788 all-in-one
installed module:
hplip - 3.9.12-1
sane-backends - 1.0.20-2
sane-frontends - 1.0.20-2
sane-libs - 1.0.20-2

root@OpenWrt:~# scanimage -L
device `hpaio:/usb/Officejet_J5700_series?serial=CN82BCV1BC04T1' is a Hewlett-Packard Officejet_J5700_series all-in-one

root@OpenWrt:~# scanimage -T
scanimage: open of device hpaio:/usb/Officejet_J5700_series?serial=CN82BCV1BC04T1 failed: Device busy

root@OpenWrt:~#logread
Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/dot4.c 231: unable to read Dot4ReverseReply header: Resource temporarily unavailable bytesRead=0
Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/dot4.c 330: invalid DOT4InitReply: cmd=0, result=20 , revision=1
Jan 1 00:48:27 OpenWrt user.warn syslog: failed to open scan channel: scan/sane/hpaio.c 657
Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/hpmud.c 327: device_cleanup: device uri=hp:/usb/Officejet_J5700_series?serial=CN82BCV1BC04T1
Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/hpmud.c 339: device_cleanup: close device dd=1...
Jan 1 00:48:27 OpenWrt user.err syslog: io/hpmud/hpmud.c 341: device_cleanup: done closing device dd=1

Who can help me? Thanks
22-02-2011, 06:16
mvnet

Sane-backends-1.0.22 has been released a few weeks ago. Anyone knows when it will be available via ipkg?
06-03-2011, 16:42
rm_fontes

Quote:

Originally Posted by electropanda

Victory!
I can scan by HP PhotoSmart c5283 now.
I intently viewed the forum :) and solution was found:
http://wl500g.info/showpost.php?p=189850&postcount=108
I had the same symptoms as described in http://wl500g.info/showthread.php?t=20098.
I changed dbus from 1.2.16-1 to 1.1.1-3.

Thus I came to current working condition through installing the following packages:
libusb - 0.1.12-2
libtiff - 3.9.4-1
libjpeg - 6b-3
libieee1284 - 0.2.11-1
sane-backends - 1.0.21-1
cups - 1.4.4-1
dbus - 1.1.1-3 (from http://wl500g.info/showpost.php?p=202794&postcount=12)
hplip - 3.9.2-1 (from http://wl500g.info/showpost.php?p=199955&postcount=119)

Else.
I had to add one line into post-boot script.

Code:

rm /opt/var/run/dbus/*

During the router starting /opt/etc/init.d/S20dbus do not examine whether daemon has already started or not.
If there is PID file in /opt/var/run/dbus/ S20dbus suppose daemon has already started. To be sure it actually starts we need to remove PID file before S20dbus is execute.
(Idea was peeped here)

Many thanks to Oliver for the How-To (and for XSane too)!

This works for me too (HP PSC 1510) but I noticed that when I start Xsane, the printer disconnect herself (kernel: printer.c: usblp0: removed), so I won't be able to print until I reboot or disconnect and connect the printer again. Any solution?
I also would like to have xsane or similar on Android? Is it possible?
11-03-2011, 22:52
civilzhang

Help needed for Brother MFC-7340

Hi all

I had difficulties in figuring out how to make the scanner work over the network.

Router: ASUS RT-N16
Firmware: Tomato v1.28.9054 MIPSR2-beta K26 USB Ext
I installed all the packages mentioned in the thread but with no luck to get the scanner working

sane-find-scanner could find the scanner
found USB scanner (vendor=0x04f9, product=0x01e7) at libusb:001:003

but scanimage -L could not identify the scanner:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

I found the drivers at brother website but they are in .deb and .rpm format and could not be installed

Any suggestions will be appreciated. Thank you!
05-05-2011, 04:59
darthwissen

SANE + HPLIP + Tomato + F300 hangs with large scan areas

SANE + HPLIP 3.11.3a-1 + Tomato v1.28.8754 ND USB Std + Hp Deskjet F380 (F300 series) only works with small scan areas.

The problem is also related to DPIs, but I can't manage to get one full page with 75 DPI, which is the lowest possible.

If i get a small area (around 1/4 of the full glass) it will scan at some times, if i increase the DPI, it won't scan. I will get an Error during device I/O, even if I try to scan directly from scanimage.

I would like to have the scanner function of my AiO printer working, at least to scan the full glass in low resolutions (<=150).

I can't load previews as well.

I thought it could be a memory problem, since it does scan small areas, but it is not, in fact, the memory usage doesn't increase much during the scan, I even created a 128MB swap partition in my flash drive (was afraid of doing so, since it would wear it quickly, will probably remove now), but it didn't change anything, it still doesn't scan with more than 55% of the router's memory (16MB) free and more than 97% of the swap memory free.

I would also like to know where else should I look for a solution to this issue, already googled for hours and hours... Maybe someone could recommend me another forum or place to ask for help.

Thanks all in advance for your effort in helping me out,

Igor Campos

Here are my configuration files:

/opt/etc/sane.d/dll.conf

Code:

hpaio

/opt/etc/sane.d/saned.conf

Code:

192.168.0.0/24

/opt/etc/xinetd.d/saned

Code:

service saned { port = 6566 socket_type = stream server = /opt/sbin/saned protocol = tcp user = root group = root wait = no disable = no }

/opt/etc/xinetd.conf

Code:

# Copyright 1999-2004 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # Sample configuration file for xinetd defaults { only_from = localhost 192.168.0.0/24 instances = 60 log_type = FILE /opt/var/xinetd.log log_on_success = HOST PID log_on_failure = HOST cps = 25 30 } includedir /opt/etc/xinetd.d

Everything is configured properly, I got the dbus and cups installed since both are required for hplip to work properly.

Here are some other files, that shows what happens:

sane-find-scanner

Code:

# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x03f0 [HP], product=0x5511 [Deskjet F300 series]) at libusb:001:006 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.

scanimage -L

Code:

device `hpaio:/usb/Deskjet_F300_series?serial=CN6BSGK1M104KH' is a Hewlett-Packard Deskjet_F300_series all-in-one

hp-probe

Code:

root@white:/opt/bin# ./hp-probe -busb warning: python-dbus not installed. warning: hp-probe should not be run as root/superuser. HP Linux Imaging and Printing System (ver. 0.0.0) Printer Discovery Utility ver. 4.1 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. -------------------- | DEVICE DISCOVERY | -------------------- Device URI Model ------------------------------------------------- ---------------------- hp:/usb/Deskjet_F300_series?serial=CN6BSGK1M104KH HP Deskjet F300 series Found 1 printer(s) on the 'usb' bus. Done.

scanimage > test.jpg

Code:

scanimage: sane_start: Error during device I/O

saned -d5

Code:

[saned] main: starting debug mode (level 5) [saned] read_config: searching for config file [saned] read_config: done reading config [saned] saned (AF-indep+IPv6) from sane-backends 1.0.22 starting up [saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo) [saned] do_bindings: " sane-port " service unknown on your host; you should add [saned] do_bindings: sane-port 6566/tcp saned # SANE network scanner daemon [saned] do_bindings: to your /etc/services file (or equivalent). Proceeding anyway. [saned] do_bindings: [0] socket () using IPv6 [saned] do_bindings: [0] socket failed: Address family not supported by protocol [saned] do_bindings: [1] socket () using IPv4 [saned] do_bindings: [1] setsockopt () [saned] do_bindings: [1] bind () to port 6566 [saned] do_bindings: [1] listen () [saned] run_standalone: waiting for control connection [saned] handle_connection: processing client connection [saned] check_host: access by remote host: 192.168.0.10 [saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK [saned] check_host: local hostname: white [saned] check_host: local hostname(s) (from DNS): c0a8:2:1862:ff7f:: [saned] check_host: local hostname(s) (from DNS): c0a8:2:1862:ff7f:: [saned] check_host: local hostname(s) (from DNS): c0a8:2:1862:ff7f:: [saned] check_host: local hostname(s) (from DNS): white [saned] check_host: local hostname(s) (from DNS): white [saned] check_host: local hostname(s) (from DNS): white [saned] check_host: remote host doesn't have same addr as local [saned] check_host: opening config file: /etc/hosts.equiv [saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory) [saned] check_host: opening config file: saned.conf [saned] check_host: config file line: `192.168.0.0/24' [saned] check_host: subnet with base IP = 192.168.0.0, CIDR netmask = 24 [saned] check_host: access granted from IP address 192.168.0.10 (in subnet 192.168.0.0/24) [saned] init: access granted [saned] init: access granted to darthwissen@192.168.0.10 [saned] process_request: waiting for request [saned] process_request: got request 1 [saned] process_request: waiting for request [saned] process_request: got request 2 [saned] process_request: access to resource `hpaio' granted [saned] process_request: sane_open returned: Success [saned] process_request: waiting for request [saned] process_request: got request 4 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5 [saned] process_request: waiting for request [saned] process_request: got request 5

to be continued... (saned -d5 is huge)
27-09-2011, 17:13
lindalion

SCX-4200 don't work

hi!

Samsung SCX-4200, RT-N16, 1.9.2.7-rtn-r2252 (and 1.9.2.7-rtn-r3000):

Code:

[root@RT-N16 root]$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x04e8 [Samsung], product=0x341b [SCX-4200 Series]) at libusb:002:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. [root@RT-N16 root]$ scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [root@RT-N16 root]$ [root@RT-N16 root]$ scanimage -T scanimage: no SANE devices found [root@RT-N16 root]$

Code:

[root@RT-N16 root]$ vi /opt/etc/sane.d/saned.conf # saned.conf # Configuration for the saned daemon 192.168.1.0/24 #grant access to scanner from network 192.168.1.x ## Daemon options # Port range for the data connection. Choose a range inside [1024 - 65535]. # Avoid specifying too large a range, for performance reasons. # # ONLY use this if your saned server is sitting behind a firewall. If your # firewall is a Linux machine, we strongly recommend using the # Netfilter nf_conntrack_sane connection tracking module instead. # # data_portrange = 10000 - 10100 ## Access list # A list of host names, IP addresses or IP subnets (CIDR notation) that # are permitted to use local SANE devices. IPv6 addresses must be enclosed # in brackets, and should always be specified in their compressed form. # # The hostname matching is not case-sensitive. #scan-client.somedomain.firm #192.168.0.1 #192.168.0.1/29 #[2001:7a8:185e::42:12] #[2001:7a8:185e::42:12]/64 # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and # /etc/services must also be properly configured to start # the saned daemon as documented in saned(8), services(4) # and inetd.conf(4) (or xinetd.conf(5)). ~ ~ ~ ~

Code:

[root@RT-N16 root]$ vi /opt/etc/xinetd.d/saned service saned { socket_type = stream server = /opt/sbin/saned protocol = tcp user = root group = root wait = no disable = no } ~ ~

Code:

[root@RT-N16 root]$ grep "saned" /etc/services saned 6566/tcp # SANE network scanner daemon

Quote:

[root@RT-N16 root]$ grep "saned" /opt/etc/init.d/S01sane-backends
if !( grep -q ^saned.*6566 /etc/services ); then
echo "saned 6566/tcp # SANE network scanner daemon" >> /etc/services

help plz
22-10-2011, 14:23
dccharacter

scanimage -L: No scanners were identified. Xerox WorkCentre 3119

Hi All, thanks for the guide. I've got Xerox WorkCentre 3119 which is said to be supported. Made quite a few attempts trying to make it work - no luck so far. Tried almost everything including re-installation from scratch.

Code:

root]$ sane-find-scanner ... found USB scanner (vendor=0x0924 [Xerox], product=0x4265 [WorkCentre 3119 Series]) at libusb:001:002 ....

Code:

root]$ scanimage -L No scanners were identified. .....

Code:

root]$ cat /etc/services |grep sane saned 6566/tcp # SANE network scanner daemon ....

Code:

[root]$ killall xinetd [root]$ xinetd -d 11/10/22@13:26:07: DEBUG: 416 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/saned [file=/opt/etc/xinetd.conf] [line=15] Service defaults Instances = 60 CPS = max conn:25 wait:30 Bind = All addresses. Only from: localhost(HOST) 192.168.1.0/255.255.255.0(NET) No access: No blocked sites Logging to syslog. Facility = authpriv, level = info Log_on_success flags = HOST PID Log_on_failure flags = HOST Service configuration: saned id = saned flags = IPv4 socket_type = stream Protocol (name,number) = (tcp,6) port = 6566 wait = no user = 0 group = 0 Groups = no PER_SOURCE = -1 Bind = All addresses. Server = /opt/sbin/saned Server argv = saned Only from: localhost(HOST) 192.168.1.0/255.255.255.0(NET) No access: No blocked sites Logging to syslog. Facility = authpriv, level = info Log_on_success flags = HOST PID Log_on_failure flags = HOST 11/10/22@13:26:07: DEBUG: 416 {cnf_start_services} Started service: saned 11/10/22@13:26:07: DEBUG: 416 {cnf_start_services} mask_max = 6, services_started = 1 11/10/22@13:26:07: NOTICE: 416 {main} xinetd Version 2.3.14 started with no options compiled in. 11/10/22@13:26:07: NOTICE: 416 {main} Started working: 1 available service 11/10/22@13:26:07: DEBUG: 416 {main_loop} active_services = 1

Code:

root]$ cat /opt/etc/init.d/S01sane-backends #!/bin/sh PATH=/sbin:/bin:/usr/bin:/usr/sbin:/opt/bin:/opt/sbin if !( grep -q ^saned.*6566 /etc/services ); then echo "saned 6566/tcp # SANE network scanner daemon" >> /etc/services fi

Code:

root]$ saned -d128 [saned] main: starting debug mode (level 128) [saned] read_config: searching for config file [saned] read_config: done reading config [saned] saned (AF-indep+IPv6) from sane-backends 1.0.22 starting up [saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo) [saned] do_bindings: " sane-port " service unknown on your host; you should add [saned] do_bindings: sane-port 6566/tcp saned # SANE network scanner daemon [saned] do_bindings: to your /etc/services file (or equivalent). Proceeding anyway. [saned] do_bindings: [0] socket () using IPv6 [saned] do_bindings: [0] setsockopt () [saned] do_bindings: [0] bind () to port 6566 [saned] do_bindings: [0] listen () [saned] do_bindings: [1] socket () using IPv4 [saned] do_bindings: [1] setsockopt () [saned] do_bindings: [1] bind () to port 6566 [saned] do_bindings: [1] bind failed: Address already in use [saned] run_standalone: waiting for control connection

Is there any hope guys?
Thanks
10-01-2012, 12:12
loentar

1 Attachment(s)

lindalion, dccharacter, I have same problem with Samsung SCX-3185.

It's because sane 1.0.22 have an issue in xerox_mfp module. I have applied patch from (it can be downloaded from http://anonscm.debian.org/gitweb/?p=...3fa63e0a25b3f7), recompiled xerox_mfp using toolchain (file attached) and placed it into /opt/lib/sane.

After that my scanner is detected by xerox_mfp module, but now i have timeout error in sanei_usb.

Most interesting log fragment:

Code:

[sanei_usb] sanei_usb_open: opened usb device `libusb:003:003' (*dn=0) [xerox_mfp] :: dev_command(INQUIRY[0x12], 70) [sanei_usb] sanei_usb_write_bulk: trying to write 4 bytes [sanei_usb] 000 1B A8 12 00 .... [sanei_usb] sanei_usb_write_bulk: wanted 4 bytes, wrote 4 bytes [sanei_usb] sanei_usb_read_bulk: trying to read 1024 bytes USB error: error reading from bulk endpoint 0x84: Connection timed out [sanei_usb] sanei_usb_read_bulk: read failed: Connection timed out [xerox_mfp] usb_dev_request: sanei_usb_read_bulk: Error during device I/O [xerox_mfp] dev_command: dev_request: Error during device I/O [xerox_mfp] usb_dev_close: closing dev 0x41dda0 [sanei_usb] sanei_usb_close: closing device 0 [xerox_mfp] list_one_device: dev_inquiry(libusb:003:003): Error during device I/O

strace log:

Code:

open("/proc/bus/usb/003/003", O_RDWR) = 4 ioctl(4, USBDEVFS_SETCONFIGURATION, 0x7fff49d4) = 0 ioctl(4, USBDEVFS_CLAIMINTERFACE, 0x7fff49d4) = 0 ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff4a24) = 0 ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff4a24) = 0 gettimeofday({1326197756, 621351}, NULL) = 0 ioctl(4, USBDEVFS_SUBMITURB, 0x7fff481c) = 0 ioctl(4, USBDEVFS_REAPURBNDELAY, 0x7fff4800) = 0 ioctl(4, USBDEVFS_BULK, 0x7fff4900) = 70 ioctl(4, USBDEVFS_BULK, 0x7fff4900) = -1 ETIMEDOUT (Connection timed out) ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff493c) = 0 ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff4a44) = 0 ioctl(4, USBDEVFS_CLEAR_HALT, 0x7fff4a44) = 0 ioctl(4, USBDEVFS_RELEASEINTERFACE, 0x7fff4a2c) = 0 close(4) = 0

Same error in rtn-r3702 (2.6 kernel) and d-r2624 (2.4 kernel).

I belive the problem can be in sanei_usb or libusb, but I can't recompile it yet.
11-01-2012, 07:56
loentar

1 Attachment(s)

Finally, I get it worked!!!

Second problem was in libusb. Simple recompiling has solved issue.

How to install:

1. Download xerox_mfp_wl500.tar.bz2 from attach and place it into /tmp dir on your wl.
2. Unpack it and install:

Code:

cd /tmp tar jxf xerox_mfp_wl500.tar.bz2 ./install

Now you can do scanimage -L and so on.
11-01-2012, 08:12
lindalion

Thanks!!! It Worked!
21-06-2012, 02:33
joeyg1973

I am so hoping someone can help me here because I sure as heck won't get any help on any of the DD-WRT forums. I have and HP PSC 1610 printer/scanner combo. I have followed all the directions here and even gone with the older version of dbus but to no avail. I am still getting this error. Any help would be appreciated.

root@DD-WRT:~# scanimage -T
process 15247: arguments to dbus_connection_send() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 3046.
This is normally a bug in some application using the D-Bus library.
D-Bus not compiled with backtrace support so unable to print a backtrace
Aborted

Hoping you can help!

Joe
30-07-2012, 09:04
bseos

*removed*
followed this instead for tomato: http://shcherbyna.com/?p=960
03-08-2012, 21:39
Bogie67

Hi there, i have installed sane-backend as per instructions, but it turns out my printer/scanner (canon mp280) is not supported in sane-backends 1.0.22. But the 1.0.23git (http://www.sane-project.org/lists/sane- ... ml#S-PIXMA) does support it.

Is there any way to get the un-released sane-backends (1.0.23git) created into an ipkg?

"bind failed (Address already in use (errno = 98)). service = saned"
05-09-2012, 00:38
!gm

hm ipkg is death... you can upgrade to our, etnware called new repository and cross-compile the software yourself :)

http://code.google.com/p/wl500g-repo/wiki/Compiling
14-09-2012, 00:47
Bogie67

I am only a newbie to understand that complex thing. The Sane-backends 1.0.23 comes out and need someone help to update the repositories
05-10-2012, 00:49
Bogie67

Anyone can help!!!
29-10-2012, 05:03
madi123

The 1.0.24git sane-backends

Quote:

Originally Posted by Bogie67

Anyone can help!!!

Please read my post at h__p://www.dd-wrt.com/phpBB2/viewtopic.php?p=720294#720294, I posted there sane-backends (1.0.24git). I assume it will work for OpenWRT platform as well.
06-11-2012, 18:07
iGeophysix

SCX-4200 problems

Hi,

I have a problem with SCX-4200
Config:
ASUS RT-N16
Firmware: 1.9.2.7-rtn-r4667

sane version 1.0.22

Entering sane-find-scanner gives:

Code:

[root@Router /]$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x04e8 [Samsung], product=0x341b [SCX-4200 Series]) at libusb:001:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.

Entering scanimege -L

Code:

[root@Router /]$ scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

nano /opt/etc/sane.d/xerox_mfp.conf :

Code:

#Samsung SCX-4200 usb 0x04e8 0x341b

in saned.conf

Code:

# saned.conf # Configuration for the saned daemon ## Daemon options # Port range for the data connection. Choose a range inside [1024 - 65535]. # Avoid specifying too large a range, for performance reasons. # # ONLY use this if your saned server is sitting behind a firewall. If your # firewall is a Linux machine, we strongly recommend using the # Netfilter nf_conntrack_sane connection tracking module instead. # # data_portrange = 10000 - 10100 ## Access list # A list of host names, IP addresses or IP subnets (CIDR notation) that # are permitted to use local SANE devices. IPv6 addresses must be enclosed # in brackets, and should always be specified in their compressed form. # # The hostname matching is not case-sensitive. #scan-client.somedomain.firm #192.168.0.1 #192.168.0.1/29 #[2001:7a8:185e::42:12] #[2001:7a8:185e::42:12]/64 192.168.1.0/24 #grant access to scanner from network 192.168.1.x # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and # /etc/services must also be properly configured to start # the saned daemon as documented in saned(8), services(4) # and inetd.conf(4) (or xinetd.conf(5)).

could you help me please?
07-11-2012, 23:48
Bogie67

madi123,

Thanks for your reply! Would you please give a step by step instructions. How can I edit the ipkg.conf?
I really want this to work and sorry that I am only a newbie on this thing.
13-11-2012, 10:28
madi123

Quote:

Originally Posted by Bogie67

madi123,

Thanks for your reply! Would you please give a step by step instructions. How can I edit the ipkg.conf?
I really want this to work and sorry that I am only a newbie on this thing.

A month ago I ws a total newbie too. Probably there is a more simple way, but I couldn't figure out. You need to use "cd" and "ls" commands to locate ipkg.conf file in your /opt folder. I don't remember the exact location of this file. Then type "vi ipkg.conf" (vi is a simple text editor). then press "a", so you can edit the lines and put "#" in front of the line that has a link to repository to disable downloading of 1.0.22 backends by default. Then <esc> then type ":wq" and hit <return>.

Now you can go to folder were sane sane-backends_git20121025-1_mipsel.ipk file is located and type "ipkg install sane-backends". Then check the version installed "ipkg list_installed". It should show something like sane-backends 1.0.24git

After installation you can go back and edit ipkg.conf, to allow downloading of other packages from repository.
14-11-2012, 23:26
Bogie67

madi123,

Hi!

I done the first step - editing of ipkg.conf. It is located at folder /opt/etc/

Now I am figuring out how can I transfer the sane-backends-1.0.23 from sda3(partition 3) or from my pc going to opt/etc(partition 2). I have a 500 gb hdd being partitioned to swap, opt & sda3.

Is the command? Ipkg -d /opt/etc install /sda3/sane-backends-1.0.23
15-11-2012, 05:52
madi123

Quote:

Originally Posted by Bogie67

madi123,

Hi!

I done the first step - editing of ipkg.conf. It is located at folder /opt/etc/

Now I am figuring out how can I transfer the sane-backends-1.0.23 from sda3(partition 3) or from my pc going to opt/etc(partition 2). I have a 500 gb hdd being partitioned to swap, opt & sda3.

Is the command? Ipkg -d /opt/etc install /sda3/sane-backends-1.0.23

So, you are almost there. :)

First "ipkg remove sane-backends" then "cd /sda3" if it is a a folder were *.ipk file is located. Then "ipkg install sane sane-backends_git20121025-1_mipsel.ipk".

I don't think you need to specify -d option since it will be installed in default location anyway. I hope you followed all instructions from the first post before removing the old backends and installing new ones.
17-11-2012, 01:18
Bogie67

Hi madi123,

To give you update:

sane-find-scanner found USB scanner (vendor=0x04a9 [Canon], product=0x1746 [MP280 series]) at libusb:001:004

scanimage -L device `pixma:04A91746_A8B681' is a CANON Canon PIXMA MP280 multi-function peripheral

scanimage -T scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1914 bytes...
.................................................. ...................................waiting
FAIL Error: Error during device I/O

log on router:

Nov 17 09:09:52 Router user.warn kernel: usb 1-1.2: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
Nov 17 09:10:11 Router user.warn kernel: usb 1-1.2: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
Nov 17 09:10:16 Router user.warn kernel: usb 1-1.2: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
Nov 17 09:10:16 Router user.warn kernel: usb 1-1.2: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1

What is wrong??
18-11-2012, 16:30
madi123

1 Attachment(s)

Quote:

Originally Posted by Bogie67

Hi madi123,

To give you update:

sane-find-scanner found USB scanner (vendor=0x04a9 [Canon], product=0x1746 [MP280 series]) at libusb:001:004

scanimage -L device `pixma:04A91746_A8B681' is a CANON Canon PIXMA MP280 multi-function peripheral

scanimage -T scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1914 bytes...
.................................................. ...................................waiting
FAIL Error: Error during device I/O

log on router:

Nov 17 09:09:52 Router user.warn kernel: usb 1-1.2: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
Nov 17 09:10:11 Router user.warn kernel: usb 1-1.2: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
Nov 17 09:10:16 Router user.warn kernel: usb 1-1.2: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1
Nov 17 09:10:16 Router user.warn kernel: usb 1-1.2: usbfs: interface 1 claimed by usblp while 'scanimage' sets config #1

What is wrong??

Check if ScanImage or Xsane is working OK since Scanimage -T always shows FAIL Error: Error during device I/O when I run command for the 2nd time. Also you need to reboot and restart all your devices (scanner, USB hub and router). I made deeper investigations and added few more tweeks to PIXMA driver which further improved stability in my case. Unzip, copy to any location available for router. then run "cp libsane-pixma.so.1.0.24 \opt\lib\sane\libsane-pixma.so.1.0.24

If it won't help I'm not sure if I can help you...
27-11-2012, 04:53
Bogie67

Hi Madi123,

I run "cp libsane-pixma.so.1.0.24 \opt\lib\sane\libsane-pixma.so.1.0.24 and reboot the router/restart all devices.

The scanimage can see the scanner but when it issue a command to scan, it gives time out error. I think that the router does'nt receive the data from the scanner?

That is my thoughts!
20-12-2012, 04:36
madi123

1 Attachment(s)

Quote:

Originally Posted by Bogie67

Hi Madi123,

I run "cp libsane-pixma.so.1.0.24 \opt\lib\sane\libsane-pixma.so.1.0.24 and reboot the router/restart all devices.

The scanimage can see the scanner but when it issue a command to scan, it gives time out error. I think that the router does'nt receive the data from the scanner?

That is my thoughts!

The problem might be USB cable, or can be buried within the Scaner driver. Try to use shorter USB cable, also borrow another scanner (not HP) and check if it works.

You scanner (CANON Canon PIXMA MP280 multi-function peripheral) is described in pixma_mp150.c which I did not edited at all. I edited pixma_imageclass.c file to get my scanner work and used hit&miss aproach. I attached the pixma_imageclass.c from the git source (old) and edited file (new). Not sure if this will help you since your problem can be elsewhere.
20-01-2013, 23:03
Bogie67

Hi Madi123,
I check the content of the sane folders, but where should I put this file - pixma_imageclass.C.new?

Further research it is because of "usblp"
19-06-2013, 21:39
UncleVic

Quote:

Originally Posted by iGeophysix

Hi,

I have a problem with SCX-4200
Config:
ASUS RT-N16
Firmware: 1.9.2.7-rtn-r4667

sane version 1.0.22

I have same problem, but I have version 1.0.23.
I can't find answer
09-05-2014, 15:04
EdP

Hope someone is still out there involved in this project.

Finally decided to get saned installed on my WL-500gx (Oleg 1.9.2.7-d-r2624) for Canon Pixma MP520.
Got it installed after a couple of trials, but I can't get the scanner to complete any scans.

Here's what happens roughly (from my linux console):

Code:

user@ubuntu:~$ scanimage -L device `net:192.168.1.2:pixma:04A91724_16B31B' is a CANON Canon PIXMA MP520 multi-function peripheral

That's nice, cause it is the right answer. But when I proceed to test or scan, I get this:

Code:

user@ubuntu:~$ scanimage -T scanimage: scanning image of size 638x877 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 1914 bytes... ... continues forever ...^C scanimage: received signal 2 scanimage: trying to stop scanner ... also continues forever ...

Same goes for trying this directly from the router's prompt:

Code:

[root@WL500G root]$ scanimage -L device `pixma:04A91724_16B31B' is a CANON Canon PIXMA MP520 multi-function peripheral

Code:

[root@WL500G root]$ scanimage -T scanimage: scanning image of size 638x877 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 1914 bytes... ... continues forever ...

I've tried different USB cables but nothing changes. Printing via the same router and USB cable is fine, so I think this is not the issue. Needless to say, I can scan just fine with the same USB cable plugged straight into my laptop/desktop.
When I try to scan an image using SimpleScan or XSane, I can hear the scanner motor running and the scanner display says "Scanning ..." but that's all, the software just hangs until I power cycle the scanner.

In case you're wondering, here's what I have installed:

Code:

[root@WL500G ipkg]$ ipkg list_installed ipkg-opt - 0.99.163-10 - The Itsy Package Manager libieee1284 - 0.2.11-1 - libieee1284 is a cross-platform library for parallel port access. libjpeg - 6b-3 - collection of jpeg tools libtiff - 3.9.5-1 - Tag Image File Format Libraries libuclibc++ - 0.2.2-9 - C++ standard library designed for use in embedded systems libusb - 0.1.12-2 - Library for interfacing to the USB subsystem. ncurses - 5.7-3 - NCurses libraries psmisc - 22.13-1 - A set of some small useful utilities that use the proc filesystem. sane-backends - 1.0.22-1 - SANE is a universal scanner interface uclibc-opt - 0.9.28-13 - micro C library for embedded Linux systems xinetd - 2.3.14-11 - Highly configurable, modular and secure inetd zlib - 1.2.5-1 - zlib is a library implementing the 'deflate' compression system.
25-01-2015, 20:29
satraf.ckar

HowTo / Tutorial

I wrote a “documentation”, how I finally got it to work, after many hours of trial & error & search. Although I did on an other device (tp-link) the process it pretty similar, and this thread provided me great help to get it to work. Thats why I decided to post it here, it might help some other people in the future.

It might be a good idea to put the a link in the first post.

It is not guaranteed, that it will work for you too, but as I did not find a tutorial even as good as this one, I decided to write it.
Maybe it’s too detailed, but I wanted to make sure that people with close to zero linux experience can understand and do it.

HERE IT GOES TO THE TUTORIAL --->
https://docs.google.com/document/d/1...it?usp=sharing

Show 40 post(s) from this thread on one page