WL-500gP with 3G USB Modem and Oleg's Firmware

Printable View

Show 40 post(s) from this thread on one page

05-09-2009, 18:02
luisfmoreira

Hi guys, I've managed to flip my modem I think but I don't know what to do next!

I've got this from lsusb:

P: Vendor=12d1 ProdID=1001 Rev= 0.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

And I configured the connection in the router has an GPRS/EDGE/UMTS config, but when I press connect I get this error:

Jan 1 00:14:16 pppd[1261]: no device specified and stdin is not a tty

What should I do next???

Thankx
08-09-2009, 10:16
luisfmoreira

Anyone? Please?
08-09-2009, 15:15
tdani

hi have you solved? i have a vodafone e180v and a asus wl500gp v2 . which firmware? how to? could you send me your??
thnaks
09-09-2009, 00:14
luisfmoreira

Hi, I haven't managed to make it work yet ... that's how far I've gotten. Maybe we can help each other.

What I think I've managed to do is to flip the modem ... but I never made it connect. Are you Portuguese by the way?
09-09-2009, 10:11
tdani

i'm italian.
My problem is that i can't also install the firmware inside..... how to put in recovery mode? how to install the firmware?
i have heard to install kopper firmware and the latest should be WL500gp-1.9.2.7-10-USB-1.71.trx . isn't it?

than what to do?
thanks
09-09-2009, 10:15
tdani

Hi, please how to install your firmware into router? any guide for mac or windows? with some guides on internet i can't do it.
how have you done? how to put in recovery mod?

can i use with this firmware also the huaewi e180?

thanks
09-09-2009, 22:00
tdani

i have an asus wl500gp v2 with a huawei e180. i can't configure to connect to internet . i use koppel. please help me....
i am a nebbie

thanks
04-10-2009, 18:45
ecser99

WL500G Delux with Huawei E1750 GPRS UMTS modem, can't connect

I have followed this guide: http://wl500g.info/showthread.php?t=13480 and installed the frimware WL500gx-1.9.2.7-10-USB-1.71.trx.
I have an USB GPRS modem, Huawei E1750, but this is not selectable in the USB GPRS settings of this firmware. I have tried to select all the Huawei modems but the connection does not work.:confused:
Is there a firmware, which supports this modem?
Is there a specific setting of the firmware I am using, whisch makes the connection work?

Thanks You
05-10-2009, 13:42
Kalixo

WL500g Premium and Huawei E 156G?

Hello!

I have WL500g Premium (WL500gpv2, firmware: 1.9.2.7-10-USB-1.71) and Huawei E 156G modem.

Is it possible to run this modem? I tried many times in many ways but It doesn't work. :mad::mad::mad:

Thank you all in advance for help. Regards from Poland.
09-10-2009, 11:57
BLU BUGATTI

Yes you can.

I have a WL500gP V2 with the last firm Koppel 1.71 and modem Huawei E156G

I set in the configuration web interface the model E169

It works perfectly even if it is not the same model
Have the same VendorID and ModemID
09-10-2009, 12:16
Kalixo

:))))))

Great to hear that!
Thank you very much for replay and solution.

I'll try it in the evening - I'll hope that I didn't change all other options :confused:

Would you be so kind and write me down all necessary options to run this modem?

Best Regards,
Kalixo
10-10-2009, 22:00
BLU BUGATTI

Excuse me if I am wrong in previous post.

The modem that I set in the router is e220.

Here you find the pictures of how I set the router.

http://img176.imageshack.us/img176/4442/50597735.th.jpg http://img176.imageshack.us/img176/3055/69913771.th.jpg

Best Regards
26-10-2009, 22:29
Kalixo

Thanks again

Thaks for screenshots :)

Unfortunatly, it didn;t helped... but i found that somenthing's wrong with my soft, becasue my asus also can't recognise any usb device (FAT).
I'll try tu update firmware and try again. Hope it'll work :confused:

Thanks again.
27-10-2009, 16:55
maucem

Hi,

I have a Dir-320 and I have successfully installed the latest oleg firmware.

I want use a 3g modem (Huawei E1692) as Wan connection.

I try to flash my router with the latest koppel firmware, but after the flashing procedure and 5 minutes, the router seemed dead.

Is possible use koppel with it?
09-12-2009, 22:45
ecser99

Quote:

Originally Posted by ecser99

I have followed this guide: http://wl500g.info/showthread.php?t=13480 and installed the frimware WL500gx-1.9.2.7-10-USB-1.71.trx.
I have an USB GPRS modem, Huawei E1750, but this is not selectable in the USB GPRS settings of this firmware. I have tried to select all the Huawei modems but the connection does not work.:confused:
Is there a firmware, which supports this modem?
Is there a specific setting of the firmware I am using, whisch makes the connection work?

Thanks You

I am still waiting, is there a new firmware? Any solution?
Thanx

Show 40 post(s) from this thread on one page