Tested : Working
Model : wl500g
Firmware : 1.9.2.7 CR3c by Oleg
Printer
Brand : Epson
Model : Stylus C46
USB interface : USB 1.1
Only small bug could be that the wl500 reports the printer as online once it was trully online at least once... :o
Printable View
Tested : Working
Model : wl500g
Firmware : 1.9.2.7 CR3c by Oleg
Printer
Brand : Epson
Model : Stylus C46
USB interface : USB 1.1
Only small bug could be that the wl500 reports the printer as online once it was trully online at least once... :o
Tested: WORKING :)
Model: WL-500g
Firmware: 1.9.2.7-2 (Oleg)
Device
Brandname: Canon
Brandtype: S750
USB Interface: YES
URL To manufacturer: http://www.canon.com
URL To product: http://www.canon.co.uk/for_home/prod...s750/index.asp
URL To driver: http://software.canon-europe.com/Pri...rs/S750604.asp
Settings: RAW, 9100; disabled StatusMonitor, Bidirectionla support
:) Canon PIXMA IP4000 Working Perfect
Tested: WORKING
Model: WL-500g
Firmware: 1.8.1.7-3
Device:
Brandname: Canon
Brandtype: PIXMA IP4000
USB Interface: Connected to Desktop PC
parallel port: LPT1 connection to WL-500G / RAW Port 9101
URL To manufacturer: Canon
Tested: WORKING
Model: WL-500g
Firmware: 1.9.3.5 (1.8.1.9 failed for me)
Device
Brandname: Canon
Brandtype: IP5000
USB Interface: YES
URL To manufacturer: http://www.canon.com
Settings: RAW, 9100; disabled StatusMonitor, Bidirectionla support
Tested : Working
Model : wl500g
Firmware : 1.9.2.7 CR3c by Oleg
Printer
Brand : Samsung
Model : ML-1210
USB interface : USB 1.1
on WLAN and LAN.
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-3c
Device
Brandname: Canon
Brandtype: PIXMA iP 2000
USB Interface: 1.1 compliant
URL To manufacturer: http://www.canon.com
URL To product: http://consumer.usa.canon.com/ir/con...&modelid=10237
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-CR4
Device
Brandname: HP (Hewlett Packard)
Brandtype: LaserJet 1010
URL To manufacturer: http://www.hp.com
Tested with Raw Printing, works fine, HUB compatible.
I notice periodic, very short motor starts of the printer, seems to becaused by the id request of the Router or so. I dont know if this harms the printer over longer time.
Tested: [WORKING!
Model: WL-500g
Firmware: 1.9.2.7-CR4 :) thx Olec
Device
Brandname: HP (Hewlett Packard)
Brandtype: PSC 950
URL To manufacturer: http://www.hp.com
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-4
Device
Brandname: Lexmark
Brandtype: Lexmark X6170 / X6190
URL To manufacturer: http://www.lexmark.com
Actually tested the X6190 but the only difference with the X6170 is the warranty (1 yr vs. 3 yrs).
Tested: NOT WORKING!
Model: WL-500g
Firmware: 1.9.2.7-4
Device
Brandname: Lexmark
Brandtype: Lexmark Z605
URL To manufacturer: http://www.lexmark.com
Tested: WORKING...but...
Model: WL-500g Deluxe
Firmware: 1.8.2.1
Device
Brandname: Lexmark
Brandtype: X1180
USB Interface: USB 2.0
URL To manufacturer: http://www.lexmark.com
URL To product: http://http://www.lexmark.co.uk/unco...en_0_1,00.html
Reply With Quote
connected to WL-500gx via USB interface as LPR server, print first page after plug in to electricity and after starting, but print job is detected up to 99% on my PC (Win XP Pro.) then it is stopped. Never reach 100 %. But document is physically printed. In queue in deleting mode. No next print job is enabled. :(
Tested: WORKING
Model: WL-500g
Firmware: 1.9.2.7-4
Device
Brandname: Lexmark
Brandtype: P915
URL To manufacturer: http://www.lexmark.com
WORKING !!!!!!
Brand: Hewlett Packard
Type : PSC 1110
Firmware: 1.8.2.1
URL : http://www.hp.com
USE Drivers for Deskjet 3650 !
Tested: WORKING
Model: WL-500gx
Firmware: 1.9.2.7-5a
Device
Brandname: HP (Hewlett Packard)
Brandtype: Deskjet 843C
Interface : USB 1.1
URL To manufacturer: http://www.hp.com
Settings: Raw on port 9100
Note: Printer has also parallel port but WL-500gx not, so this is not tested
Tested: WORKING
Model: WL-500g
Firmware: 1.9.2.7-5a
Device
Brandname: HP (Hewlett Packard)
Brandtype: Deskjet 930C
Interface : USB 1.1, LPT
URL To manufacturer: http://www.hp.com