Firmware v1.9.2.7 CR5, updated: v1.9.2.7 CR5a [Oleg]

Printable View

Show 40 post(s) from this thread on one page

10-05-2005, 14:39
kdudl

3 Attachment(s)

Problem with CR5 and HP Printer: fix for parallell interface is not working

Quote:

Originally Posted by Oleg

do you've timeouts in the system log?

First of all, you find as annex the syslog made with CR4 from boot up to time after a successful print.

In order to document the problem I have installed again CR5. You find as further annexes:
1) Syslog with CR5 without fix: from boot up to time after print of 2 documents (both documents unsuccessful)
2) Syslog with CR5 with fix : from boot up to time after print of 4 documents:
first doc: short doc printed with basic driver: successful
second doc: XP printer test page with basic driver: partly unsuccessful
third doc: short doc with HP driver: unsuccessful
fourth doc: XP printer test page with HP driver: unsuccessful

Would other infos be useful for you before i go back again to CR4 installation?
10-05-2005, 17:04
Oleg

Ok, everyone with RAW print problems are invited to test this firmware: http://wl500g.dyndns.org/WL500g-1.9.2.7-5a-pre1.trx and let me know if it starts working and other printing problems you probably have with RAW printing.
10-05-2005, 19:17
FIB

Quote:

Originally Posted by Oleg

Ok, everyone with RAW print problems are invited to test this firmware: http://wl500g.dyndns.org/WL500g-1.9.2.7-5a-pre1.trx and let me know if it starts working and other printing problems you probably have with RAW printing.

Sorry, but WL500g-1.9.2.7-5a-pre1.trx do not work for my, but different than WL500g-1.9.2.7-5.trx. Look like some missing/corrupted/extra chars are sent to the printer. I just do the "Print Test Page" in Windows XP, so I can't provide further details, sorry.
10-05-2005, 19:26
Oleg

FIB, it should work for you, as I've removed -b. Please try with trick again (should not help if you've flashed right firmware).
10-05-2005, 19:28
kdudl

Problem with CR5 and HP Printer: CR5a-pre1 not OK in RAW modus; OK in LPR

Quote:

Originally Posted by Oleg

Ok, everyone with RAW print problems are invited to test this firmware: http://wl500g.dyndns.org/WL500g-1.9.2.7-5a-pre1.trx and let me know if it starts working and other printing problems you probably have with RAW printing.

Hello Oleg, Thanks for your efforts to solve our printer problems.
I have installed the 5a-pre1 version.
In my case I register unfortunately no progress. In raw modus the printer does not print anything more correctly. Same situation with the basic driver or with the HP driver.

As I need to use the print server, I tried to switch to the LPR modus. The result is positive. The printer is working correctly. (I don't know if it was also the case with the original CR5 version; I did not test it earlier). So at this time I will stay with your last version and print with the LPR modus. In waiting and hope that a solution is once available for the RAW modus. I will also inform you if the other functions of 5a-pre1 are workink correctly.
10-05-2005, 19:51
Emand

still printer problems

Quote:

Originally Posted by Oleg

Ok, everyone with RAW print problems are invited to test this firmware: http://wl500g.dyndns.org/WL500g-1.9.2.7-5a-pre1.trx and let me know if it starts working and other printing problems you probably have with RAW printing.

Hi Oleg
I try the firmware, and the printer (hp890), print all the text, and a lot of other characters, my canon printer (Pixma4000), connected to the usb port, can't print at all.
With the firmware 1.9.2.7-5, the Canon printer, prints one good print, than I have to reboot, to get the printer work again.
If I after a reboot print one one the HP printer, then I can't print one the canon after this

Sorry for my english.

/Emand
10-05-2005, 20:40
FIB

Quote:

Originally Posted by Oleg

FIB, it should work for you, as I've removed -b. Please try with trick again (should not help if you've flashed right firmware).

The trick:

Code:

killall p910nd p910nd -f /dev/usb/lp0 0

do not do any difference on (my ;) ) WL500g-1.9.2.7-5a-pre1.trx.
10-05-2005, 20:43
Oleg

I need a system logs from unsuccessful printings. Please post them.
10-05-2005, 21:07
FIB

1 Attachment(s)

Quote:

Originally Posted by Oleg

I need a system logs from unsuccessful printings. Please post them.

From WL500g-1.9.2.7-5a-pre1.trx no trick.
10-05-2005, 21:23
kdudl

Problem with CR5 and HP Printer: CR5a-pre1 not OK in RAW modus

Quote:

Originally Posted by Oleg

I need a system logs from unsuccessful printings. Please post them.

Hi Oleg,
In the attachment the needed syslog (from boot time up to unsuccessful printing in RAW.
10-05-2005, 21:24
Emand

1 Attachment(s)

Quote:

Originally Posted by Oleg

I need a system logs from unsuccessful printings. Please post them.

I have maked a save in the syslog windows in the web interface, im not sure that this is log file you mean.

(5a-Pre1)
/Emand
10-05-2005, 21:24
hansbr

1 Attachment(s)

Quote:

Originally Posted by Oleg

I need a system logs from unsuccessful printings. Please post them.

Oleg,
I put your new firmware in the wl-500g. (5a-pre1)
Printing to my parallel port got worse, printing the same exel file as yesterday, gives a lot of corrupted text/pages.

thanks for your effort.

Hans
10-05-2005, 21:25
kdudl

1 Attachment(s)

Quote:

Originally Posted by kdudl

Hi Oleg,
In the attachment the needed syslog (from boot time up to unsuccessful printing in RAW.

Sorry, attachment was missing...
10-05-2005, 21:55
Oleg

Guys, yet another attempt. Fixed a stupid error in -pre1, do not use it anymore. Try this one and let me know if you are happy now. :)
10-05-2005, 22:12
Emand

The problem seems to be solved

Quote:

Originally Posted by Oleg

Guys, yet another attempt. Fixed a stupid error in -pre1, do not use it anymore. Try this one and let me know if you are happy now. :)

It seems that both of my printers are working all right now.

Thanks

/Emand

Show 40 post(s) from this thread on one page