I do not have such diff at all.Quote:
Originally Posted by SurJector
Printable View
I do not have such diff at all.Quote:
Originally Posted by SurJector
Sorry I'm too elliptic, what I meant was: if you do not wish to spend the additional time and effort to make and publish this diff, I'll patch my source firmware alone. I hoped that it was easy for you to compute and publish that diff, that's all (fon instance: the linux kernel is published both in ``complete tarbal''l and ``patch with respect to the last version'', so that you can patch incrementally; it's obvisouly an additional hurdle for you and probably not useful for many people except (maybe) oleo and myself). If you keep the last version of the source tree it might be easy to do, so that I'd be happy to have such a diff, otherwise, let's forget my request.Quote:
Originally Posted by Oleg
I have WL-500G and AT&T is the isp. It was working with all the previouse 7a,7b,7c. After upgrade to 7d, it won't connect to internet. Back to 7c, everything is O.K. The log seems normal and it show connect, but just won't load the web page.Quote:
Originally Posted by dunatos
confirmed. same prb here. any clue?Quote:
Originally Posted by jycai
thx in advance
Guys, post your system logs, please. Which connection type you've selected in the WAN settings? Static/DHCP/...?
thx for ur reply.Quote:
Originally Posted by Oleg
WAN connect by DHCP
syslog with PM
thx
So far no problems with 1.9.2.7-7d. Working fine :)
Hm... According to your syslog, everything is OK, and you've pppoe connection, not dhcp. Also, this log is not for -7d version for sure... Please flash -7d and save correct log.Quote:
Originally Posted by knoes
syslog7d by PM (sorry my fault)Quote:
Originally Posted by Oleg
on 7c again to sent this stuff
greetz a. thx
According to your logs, you're running wl500g deluxe (not the wl500g). Also, according to your logs the box is connected to your ISP and working fine. Could you please clarify your problems?Quote:
Originally Posted by knoes
Also, your connection type is PPPoE, not DHCP!
installed .trx file - WL500gx-1.9.2.7-7dQuote:
Originally Posted by Oleg
connection type is - PPPoE
ISP connection is established though, no access to websides neither mail
flashing back to 7c all is working as it should without changing any settings.
greetz
Try to figure out the reason, i.e. from your PC type:
nslookup www.wl500g.info
ping www.wl500g.info
tracert www.wl500g.info
if something failed - telnet to router and type
nslookup www.wl500g.info
ping www.wl500g.info
traceroute www.wl500g.info
Post your results here.
P.S. I've PPPoE connection to my ISP, everything is working fine.
C:\Documents and Settings\opaold>nslookup www.wl500g.infoQuote:
Originally Posted by Oleg
Server: my.router
Address: 192.168.1.1
Non-authoritative answer:
Name: www.wl500g.info
Address: 87.239.8.20
C:\Documents and Settings\opaold>ping www.wl500g.info
Pinging www.wl500g.info [87.239.8.20] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 87.239.8.20:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Documents and Settings\opaold>tracert www.wl500g.info
Tracing route to www.wl500g.info [87.239.8.20]
over a maximum of 30 hops:
1 2 ms <1 ms <1 ms my.router [192.168.1.1]
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
over telnet:
[opaold@(none) root]$ nslookup www.wl500g.info
Server: www-proxy.K1.srv.t-online.de
Address: 217.237.150.97
Name: www.wl500g.info
Address: 87.239.8.20
[opaold@(none) root]$ ping www.wl500g.info
PING www.wl500g.info (87.239.8.20): 56 data bytes
64 bytes from 87.239.8.20: icmp_seq=0 ttl=57 time=50.7 ms
64 bytes from 87.239.8.20: icmp_seq=1 ttl=57 time=51.2 ms
64 bytes from 87.239.8.20: icmp_seq=2 ttl=57 time=50.3 ms
64 bytes from 87.239.8.20: icmp_seq=3 ttl=57 time=50.
[opaold@(none) root]$ traceroute www.wl500g.info
traceroute to www.wl500g.info (87.239.8.20), 30 hops max, 40 byte packets
1 * * *
2 217.0.74.2 (217.0.74.2) 41.147 ms 41.47 ms 40.55 ms
3 ams-e4.AMS.NL.net.DTAG.DE (62.154.15.2) 47.279 ms 47.686 ms 48.114 ms
4 so6-2-0.mpr3.ams1.nl.above.net (62.4.65.25) 47.679 ms 47.501 ms 48.205 ms
5 pos-8-0.cr1.ams2.nl.above.net (64.125.31.14) 48.423 ms 48.265 ms 48.479 m
s
6 grafix.ams4.nl.above.net (82.98.253.68) 48.861 ms 85.999 ms 48.938 ms
7 rtr-1.rtd-kub.grafix.nl (217.67.232.141) 58.514 ms 217.67.247.5 (217.67.247
.5) 50.192 ms 50.305 ms
8 web00.intention.nl (87.239.8.20) 51.173 ms 50.695 ms 50.204 ms
[opaold@(none) root]$
greetz
Please telnet to router (with 7d running), type
and post output...Code:iptables -vnL
iptables -t nat -vnL
Ok, the reason is the empty WAN ip address field. Wait a bit for 1.9.2.7-7e.
[opaold@(none) root]$ iptables -vnLQuote:
Originally Posted by Oleg
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
state INVALID
543 32375 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0
state RELATED,ESTABLISHED
8 480 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
state NEW
15 720 ACCEPT all -- br0 * 0.0.0.0/0 0.0.0.0/0
state NEW
3 160 SECURITY all -- ppp0 * 0.0.0.0/0 0.0.0.0/0
state NEW
0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0
tcp dpt:21
3 160 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT 17 packets, 816 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- br0 br0 0.0.0.0/0 0.0.0.0/0
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
state INVALID
17 816 TCPMSS tcp -- * * 0.0.0.0/0 0.0.0.0/0
tcp flags:0x06/0x02 tcpmss match 1453:6553
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0
state RELATED,ESTABLISHED
0 0 SECURITY all -- ppp0 * 0.0.0.0/0 0.0.0.0/0
state NEW
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0
ctstate DNAT
Chain OUTPUT (policy ACCEPT 889 packets, 590K bytes)
pkts bytes target prot opt in out source destination
Chain MACS (0 references)
pkts bytes target prot opt in out sourc
Chain SECURITY (2 references)
pkts bytes target prot opt in out source destination
3 160 RETURN tcp -- * * 0.0.0.0/0 0.0.0.0/0
tcp flags:0x16/0x02 limit: avg 1/sec burst 5
0 0 RETURN tcp -- * * 0.0.0.0/0 0.0.0.0/0
tcp flags:0x17/0x04 limit: avg 1/sec burst 5
0 0 RETURN udp -- * * 0.0.0.0/0 0.0.0.0/0
limit: avg 5/sec burst 5
0 0 RETURN icmp -- * * 0.0.0.0/0 0.0.0.0/0
limit: avg 5/sec burst 5
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
Chain logaccept (0 references)
pkts bytes target prot opt in out source destination
0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0
state NEW LOG flags 7 level 4 prefix `ACCEPT '
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0
Chain logdrop (0 references)
pkts bytes target prot opt in out source destination
0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0
state NEW LOG flags 7 level 4 prefix `DROP '
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
[opaold@(none) root]$ iptables -t nat -vnL
Chain PREROUTING (policy ACCEPT 29 packets, 1412 bytes)
pkts bytes target prot opt in out source destination
Chain POSTROUTING (policy ACCEPT 25 packets, 1438 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 17 packets, 1054 bytes)
pkts bytes target prot opt in out source destination
Chain VSERVER (0 references)
pkts bytes target prot opt in out source destination
greetz
Uploaded 1.9.2.7-7e, PPPoE with empty WAN IP address issue fixed.
works like charm.Quote:
Originally Posted by Oleg
thanks a bunch for your outstanding support, i appreciate it.
greetz
It is working for me now. Thanks Oleg for the great work!Quote:
Originally Posted by knoes
Im testing de 1.9.2.7-7e and no bugs so far...
When 54g Protection gets enabled in 7e, no wireless client can connect to the station.
It seems the clients are assigned only IPv6 adresses via DHCP - then again, syslog does not show any DHCP request from them anymore.
Unchecking it again does not solve this - only a reset to factory defaults does.
This doesn't sound too good, too:
Code:Jun 22 00:24:29 kernel: Unable to handle kernel paging request at virtual address 000000e8, epc == 800d2ce8, ra == 800d2cc0
Jun 22 00:24:29 kernel: Oops in fault.c::do_page_fault, line 192:
Jun 22 00:24:29 kernel: $0 : 00000000 802098e4 00000001 0000001c 81c03110 00000000 00000000 00000008
Jun 22 00:24:29 kernel: $8 : 0000001c ffffffeb 00000010 6c761c64 00005000 00000000 00000000 00000000
Jun 22 00:24:29 kernel: $16: 802197e8 81cc4ac0 81c030e0 00000000 81a93e98 7fff78c8 0043b5f0 7fff79a0
Jun 22 00:24:29 kernel: $24: 00000010 2abd8790 81a92000 81a93e58 7fff7a4a 800d2cc0
Jun 22 00:24:29 kernel: Hi : 00000000
Jun 22 00:24:29 kernel: Lo : 00000001
Jun 22 00:24:29 kernel: epc : 800d2ce8 Not tainted
Jun 22 00:24:29 kernel: Status: 1000fc03
Jun 22 00:24:29 kernel: Cause : 00000008
Jun 22 00:24:29 kernel: Process pppd (pid: 89, stackpage=81a92000)
Jun 22 00:24:29 kernel: Stack: 01ad569b 0000004e 81a92000 81cbd960 7fff7e08 81a6d338 0000001e
Jun 22 00:24:29 kernel: 00000003 7fff7ed4 7fff78c8 800ebfc4 800ebf80 7fff7ed4 7fff7a4a 800c6808
Jun 22 00:24:29 kernel: 00030002 00000018 00000000 a2600b00 6c761c64 00316e61 8c282ac5 60002ac9
Jun 22 00:24:29 kernel: 00001001 81c031a0 4004745a 81ba4720 8024b2e0 81b6c680 80037a44 81aa26a0
Jun 22 00:24:29 kernel: 80042c58 810f0000 81aa26a0 81ba4720 810f4520 00000000 00000003 80035ebc
Jun 22 00:24:29 kernel: 80035ea8 ...
Jun 22 00:24:29 kernel: Call Trace: [<800ebfc4>] [<800ebf80>] [<800c6808>] [<80037a44>] [<80042c58>]
Jun 22 00:24:29 kernel: [<80035ebc>] [<80035ea8>] [<80048240>] [<800085a4>]
Jun 22 00:24:29 kernel:
Jun 22 00:24:29 kernel: Code: 00000000 8e450024 24020001 <c0a400e8> 00821823 e0a300e8 1060fffc 00821823 0000000f
Hello all,
I am new into this community and I decided to try upgrade firmware in my WL500G Deluxe ...
BUT ... when I upgrade to version: WL500gx-1.9.2.7-7e or any other, I am unable to set up my internet connection, so I had to downgrade back to version: 1.8.2.1 - because it is only ONE, where I am able set my internet connection
In version 1.8.2.1 I do follows after downgrade and complete reset: in Quick guide I choose Home gateway, cable modem connection with auto IP assigment, auto IP and DNS, in hostname and mac adress I fill in same: 0011e3548fb5 - reboot and it works ... in ANY other version doesn`t
In ANY other newer version my WL500Gx doesn`t receive IP adresses from my cable modem.
For setup I am using web interface.
Tried search these forums, but find anything what could help me ...
Thank you for any help or suggestions...
Luke
SOLVED ...
I just did same upgrade again to the Olegs latest drivers ... after upgrade i did complete restart of router (pushed button on the back side), didn`t setup anything and it works now ...
I don`t understand it ...
Does exist any manual to all those new functions in Olegs firmware?
Thx @ll
Luke
firmware version 1.9.2.7-7e
I followed the guide lines of "Ssh and telnet daemons" @ "http://oleg.wl500g.info/", but I still can't get dropbear to start at boot. I have to connect with telnet, and manually run dropbear before I can use ssh. I use Gentoo on my pc, and I am used to the easy Initscripts to load daemons @ bootup. Any suggestions will be gladly taken.Thank You For Your Time
I ran
I noticed the missing # so ICode:$cat /usr/local/sbin/post-boot
!/bin/sh
dropbear
Code:$ rm /usr/local/sbin/post-boot
$ echo "#!/bin/sh" >> /usr/local/sbin/post-boot
$ chmod +x /usr/local/sbin/post-boot
$ echo "dropbear" >> /usr/local/sbin/post-boot
$ cat /usr/local/sbin/post-boot
#!/bin/sh
dropbear
$ flashfs save && flashfs commit && flashfs enable
tar: Removing leading '/' from member names
tmp/local/
tmp/local/etc/
tmp/local/etc/dropbear/
tmp/local/etc/dropbear/dropbear_rsa_host_key
tmp/local/etc/dropbear/dropbear_dss_host_key
tmp/local/sbin/
tmp/local/sbin/post-boot
tmp/local/root/
-rw-r--r-- 1 admin root 1232 Jun 27 16:57 /tmp/flash.tar.gz
Check saved image and type "/sbin/flashfs commit" to commit changes
Commited.
$ reboot
me to with this new firmware..
Code:Jul 3 19:03:15 wan: disconnected manually
Jul 3 19:03:16 pppd[147]: Terminating on signal 15.
Jul 3 19:03:16 dnsmasq[52]: read /etc/hosts - 4 addresses
Jul 3 19:03:16 dnsmasq[52]: read /etc/ethers - 3 addresses
Jul 3 19:03:16 dnsmasq[52]: reading /tmp/resolv.conf
Jul 3 19:03:16 PPPoE: Disconnected
Jul 3 19:03:19 wan: connected manually
Jul 3 19:03:19 pppd[147]: Terminating on signal 15.
Jul 3 19:03:20 pppd[147]: Modem hangup
Jul 3 19:03:20 pppd[147]: Connection terminated.
Jul 3 19:03:20 pppd[147]: Connect time 521.6 minutes.
Jul 3 19:03:20 pppd[147]: Sent 117014543 bytes, received 309216590 bytes.
Jul 3 19:03:20 kernel: Unable to handle kernel paging request at virtual address 000000e8, epc == 800d2ce8, ra == 800d2cc0
Jul 3 19:03:20 kernel: Oops in fault.c::do_page_fault, line 192:
Jul 3 19:03:20 kernel: $0 : 00000000 802098e4 00000001 000000c9 809864d0 00000000 00000000 00000008
Jul 3 19:03:20 kernel: $8 : 000000c9 ffffff81 00000010 7465c901 00005000 00000000 00000002 00000000
Jul 3 19:03:20 kernel: $16: 802197e8 8086d4e0 809864a0 00000000 808f3e98 7fff7828 0043bbe0 7fff7900
Jul 3 19:03:20 kernel: $24: 00000010 2abd8790 808f2000 808f3e58 7fff79aa 800d2cc0
Jul 3 19:03:20 kernel: Hi : 00000000
Jul 3 19:03:20 kernel: Lo : 0000000b
Jul 3 19:03:20 kernel: epc : 800d2ce8 Not tainted
Jul 3 19:03:20 kernel: Status: 1000fc03
Jul 3 19:03:20 kernel: Cause : 00000008
Jul 3 19:03:20 kernel: Process pppd (pid: 147, stackpage=808f2000)
Jul 3 19:03:20 kernel: Stack: 006d669b 0000004f 808f2000 80af1600 7fff7e08 80bddb18 0000001e
Jul 3 19:03:20 kernel: 00000003 7fff7ed4 7fff7828 800ebfc4 800ebf80 80b9eb90 800c6ab0 800c6808
Jul 3 19:03:20 kernel: 00030002 00000018 00000000 a01a9000 7465c901 0e003168 8c282ac5 60002ac9
Jul 3 19:03:20 kernel: 800c1001 fffffff0 80ee29a0 807f44c0 802ff2e0 80920400 80037a44 808348c0
Jul 3 19:03:20 kernel: 80042c58 8029a000 808348c0 807f44c0 809ba200 00000000 00000003 80035ebc
Jul 3 19:03:20 kernel: 80035ea8 ...
Jul 3 19:03:20 kernel: Call Trace: [<800ebfc4>] [<800ebf80>] [<800c6ab0>] [<800c6808>] [<800c1001>]
Jul 3 19:03:20 kernel: [<80037a44>] [<80042c58>] [<80035ebc>] [<80035ea8>] [<800085a4>]
Jul 3 19:03:20 kernel:
Jul 3 19:03:20 kernel: Code: 00000000 8e450024 24020001 <c0a400e8> 00821823 e0a300e8 1060fffc 00821823 0000000f
Jul 3 19:03:21 pppd[217]: Plugin rp-pppoe.so loaded.
Jul 3 19:03:21 pppd[217]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jul 3 19:03:21 pppd[218]: pppd 2.4.2 started by admin, uid 0
I had firmware 7b running with a USB stick attached to a usb-hub. (with 1 swap and 1 ext3 partition)
After following the macsat manual for setting up a usbstick/website etc I could mount it with the post-boot script posted below:
But now, with version 7e all my disks are gone and I can't find where and how to mount the usb stick and setup stuff as it was. /dev/discs/disc0/part1 does not exist, /dev/scsi is empty.Code:#!/bin/sh
# wait for /opt to mount
mount /dev/discs/disc0/part1 /opt
i=0
while [ $i -le 30 ]
do
if [ -d /opt/etc ]
then
break
fi
sleep 1
i=`expr $i + 1`
done
# Activate swap
swapon /dev/discs/disc0/part2
dropbear -j -k -p 2222
# Run all active services - active means starts with S
/opt/etc/init.d/rc.unslung
Any idea where things have gone? Oleg?
How can I install sftp package? I am using built-in dropbear. Where can I get sftp module? I do no see anything when I doQuote:
1.9.2.7-7e: Built-in SSH server should now correctly call sftp installed using ipkg
.Code:ipkg search '*sftp*'
I found out that if I insert a FAT partitioned usb stick right after flashing it seems to generate all devices (not so with the ext3 and swap partitioned disk. When I reinsert the ext3 and linux swap partitioned disk it is recognised. Now all works fine.
Hallo,
Im trying to configure my PDA (HP55xx) after router frmware update from previous OLEG version to current.
(on previous everything works fine)
PDA is working with .11b WPA-PSK/TKIP, but is unable to connect to router. I see in "Status & Log - Wireless" only MAC adress, no "associated" and no "authorized" msg.
Router is set to auto mode, .11g protection as was on previous firmware version. But when I change to "802.11B only" my PDA is successfully connected.
I tryed resets to factory defaults and set completely from "zero point" but still same - no G and B in one moment.
Could someone help me please?
Edit: Asus WL-500g Deluxe, working as home gateway
Hello,
I have a wl-hdd and put this firmware on it. Now i am not able to make shares on de hdd anymore with te webinterface.... someone can tell me how to do this ?
Carlo
It seems to me, as if with the latest firmware version (7e) a post-boot file, which has been copied to the flash, will not be executed properly. When I put the 7c-version on my WL-HDD again, the difficulties were gone.
Would be fine, if Oleg fixed that.
Hello,
I don't know for previous versions, but with 7e with post-boot and post-firewall scripts to open to WAN I can't access ftp until I enable Super user account and then once login with super user. After that I can login with users on user account list from WAN.
And another issue with external USB disk (FAT32). Once per day I have disk disconnection
System log:
Jul 24 22:39:08 kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
Jul 24 22:39:08 kernel: usb.c: USB disconnect on device 00:04.0-1 address 2
Jul 24 22:39:09 kernel: hub.c: new USB device 00:04.0-1, assigned address 3
Jul 24 22:39:11 USB storage: removed
Regards
Hello I've got a problem with the new 7e release. One of the computers I have stops transferring data packs from or to the router if I'm playing a game (.exe file). Its only with games because when I'm browsing or whatever it doesn't stop transferring data packs. He even looses its IP when I try to /ipconfig lease /ipconfig renew (after I played a game). There is only one way to get the IP back, and that is a reboot. And it is only with one computer (both integrated NIC cards), the other ones just work fine. And I didn't got this problem with the previous releases. And in the log files there is says that there is no request.
The NIC is a Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller.
Probably same problem here! Marvell Yukon integrated Gigabit Ethernet card stops sending packets. Renew of IP adress didn't help. Complete reboot of PC helped. I tried to set my Marvell Yukon to 100mbit full duplex (instead of Auto Sense) and it seems to be okay now.Quote:
Originally Posted by FF1987
EDIT2: Speed setting didn't helped at all, but I realized, that I can only DISABLE and then REENABLE my Marvel Yukon and it's working again... (for a while)
Is it possible to add a new feature to the next firmware release.
I'm looking for a feature that keeps my adsl2+ line alive. It can be something that pings a server every 15 seconds or something like that.
Still have this problem. Oleg any idea what it is?Quote:
Originally Posted by FF1987
I test that firmware but the motion detection is still not working with my logitech quickcam 4000.
Is there any explanation about this problem ??
Thanks
This is not a router problem. Either drivers or hw problem on your PC.Quote:
Originally Posted by FF1987