[HowTo] Sane Scanner-Server with XSane Frontend

Hi,

means that the file is damaged...
I upoaded it again, the link is updated.

http://rapidshare.com/files/39484398...2-1_mipsel.ipk

Regards
Oliver

Unfortunately, I still get the same error.

here's the file I downloaded this morning
-rw-r--r-- 1 root root 47646 Jun 3 09:36 hplip_3.9.2-1_mipsel.ipk
here's the file I downloaded just now
-rw-r--r-- 1 root root 47648 Jun 3 13:28 hplip_3.9.2-1_mipsel.ipk

Hi,

I will check that tomorrow.

Regards
Oliver

Wow, thanks for amazing faq! I followed it to setup printer server for my RT-N16 and it works!

However the conf file for sane server was not properly generated, I had to modify it, but afterwards it works like a charm!

Hi,

what did you have to change at the config file?

Regards
Oliver

Quote:

Originally Posted by rm_fontes

I searched on the forum for this and found http://wl500g.info/showthread.php?t=20098.
Is it possible to make the hp dsc 1510 work without dbus?

Try use old version of dbus:
dbus_1.1.1-3_mipsel.ipk

Also, need install CUPS - all work fine with hplip_3.9.2-1_mipsel.ipk!
http://www.nslu2-linux.org/wiki/HowT...gScanWithHPLIP

Asus WL-500W + HP LaserJet 3055 All-in-One Printer

kulibin -- can you please let me know from where you downloaded hplip_3.9.2-1_mipsel.ipk. Is that the version carterb put on rapidshare? Thanks.

Hi,

yes, I compiled 3.9.2-1!
Should work...

Regards
Oliver

Quote:

Originally Posted by chuckwhite

kulibin -- can you please let me know from where you downloaded hplip_3.9.2-1_mipsel.ipk. Is that the version carterb put on rapidshare? Thanks.

Yes, this version of carterb from rapidshare.

Not working anymore with Canon PIXMA MP140

I have some problems getting this to work with my Canon PIXMA MP140 device. Previously (about a half year ago) I had no trouble using the scanner of the device: the sane scanner server worked like a charm with my WL500gPV2 and I could easily use the scanner via XSane with my PC.

However, now when I had to completely reinstall all software to the router (USB stick got corrupted), I no longer can use the scanner. I did everything exactly the same as previously. The scanner is recognized and even the scanning procedure starts. However, the problem is that the scanner is never stopped. The scanner seems to really scan the paper but then it does not stop as it should: the scanning lights just keep on rolling forever.

Below are some outputs with scanimage from my router:

Code:

[root@router root]$ scanimage -L device `pixma:04A9172B_05C0C4' is a CANON Canon PIXMA MP140 multi-function peripheral

Code:

[root@router root]$ sane-find-scanner found USB scanner (vendor=0x04a9 [Canon], product=0x172b [MP140 series]) at libusb:002:003

Code:

[root@router root]$ scanimage -vvvv -T scanimage: scanning image of size 638x877 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 1914 bytes... scanimage: received signal 2 scanimage: trying to stop scanner scanimage: received signal 2 scanimage: aborting

Above, the process hangs to the "reading one scanline, 1914 bytes". It does not stop until I press Ctrl+C when it tries to stop the scanner without luck. Finally, I have to manually power off the scanner.

The firmware is Oleg's WL500gpv2-1.9.2.7-d-r1612 (I also tried it with r1000 which I previously had but with no luck) with the full install specified in http://wl500g.info/showthread.php?t=21774.

I checked that the scanner of the device does really work by plugging it directly to my PC. I even tried a different USB cable. It seems that there is something wrong with the scanimage program: everything else works but it just can't stop the scanner. Any suggestions how to fix this? Are the previous versions of sane-backends downloadable for WL500g somewhere?

Hi,

can you scan from a remote client, XSane...?

Regards,
Oliver

Quote:

Originally Posted by carterb

Hi,
can you scan from a remote client, XSane...?

Yes I can, but it does exactly the same as using the scanimage directly from the router. Xsane finds the scanner and starts the scanning but the scanner is never stopped. The scanning lights on the scanner just keep rolling forever. The sounds that the scanner makes indicates that it does the actual scanning but for some reason fails at the last step.

The XSane program stops to the state "Receiving RGB data" so propably there are some problems in sending/receiving the scan data. Are there any ways to get more detailed error messages e.g. with scanimage or Xsane?

EDIT: Never mind about the extra debug info. I found out way to get extra info with setting some environmental variables specified in http://www.sane-project.org/man/sane-pixma.5.html

Here is some more detailed debug info about my problem:

Code:

export SANE_DEBUG_PIXMA=21 export PIXMA_EXPERIMENT=0 export SANE_CONFIG_DIR=/opt/etc/sane.d: scanimage -T [sanei_debug] Setting debug level of pixma to 21. [pixma] pixma is compiled without pthread support. [pixma] Could not read pixma configuration file: pixma.conf [pixma] pixma version 0.16.2 [pixma] pixma_collect_devices() found Canon PIXMA MP140 at libusb:002:012 [pixma] sanei_bjnp_find_devices: [pixma] Added all configured scanners, now do auto detection... [pixma] scanner discovery finished... [pixma] pixma_find_scanners() found 1 devices [pixma] pixma_collect_devices() found Canon PIXMA MP140 at libusb:002:012 [pixma] sanei_bjnp_find_devices: [pixma] Added all configured scanners, now do auto detection... [pixma] scanner discovery finished... [pixma] pixma_open(): Canon PIXMA MP140 [pixma] OUT T=2.823 len=16 [pixma] 00000000:f3 20 00 00 00 00 00 00 00 00 00 00 00 00 00 10 [pixma] [pixma] IN T=2.844 len=24 [pixma] 00000000:06 06 00 00 00 00 00 00 01 00 00 00 00 03 00 02 [pixma] 00000010:00 00 00 00 00 00 00 fa [pixma] [pixma] Current status: paper=0 cal=0 lamp=2 busy=0 [[pixma] Reader task started [pixma] [pixma] pixma_scan(): start [pixma] line_size=1914 image_size=1678578 channels=3 depth=8 [pixma] dpi=75x75 offset=(0,0) dimension=638x877 [pixma] gamma_table=0x444234 source=0 pixma] Reader task id=281 (forked) scanimage: scanning image of size 638x877 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 1914 bytes... [pixma] INTR T=5.019 len=16 [pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [pixma] [pixma] Sending time: '10/07/24 23:27' [pixma] OUT T=5.022 len=36 [pixma] 00000000:eb 80 00 00 00 00 00 00 00 00 00 00 00 00 00 14 [pixma] 00000010:31 30 2f 30 37 2f 32 34 20 32 33 3a 32 37 00 00 [pixma] 00000020:00 00 00 4c [pixma] [pixma] IN T=5.024 len=8 [pixma] 00000000:06 06 00 00 00 00 00 00 [pixma] [pixma] OUT T=5.130 len=16 [pixma] 00000000:db 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [pixma] [pixma] IN T=5.136 len=8 [pixma] 00000000:06 06 00 00 00 00 00 00 [pixma] [pixma] OUT T=5.138 len=28 [pixma] 00000000:dd 20 00 00 00 00 00 00 00 00 00 00 00 00 00 0c [pixma] 00000010:01 01 00 00 00 01 00 00 00 00 00 fd [pixma] [pixma] IN T=5.140 len=8 [pixma] 00000000:06 06 00 00 00 00 00 00 [pixma] [pixma] OUT T=5.142 len=2072 (snipped some useless stuff) [pixma] [pixma] IN T=5.172 len=8 [pixma] 00000000:06 06 00 00 00 00 00 00 [pixma] [pixma] OUT T=5.174 len=64 [pixma] 00000000:de 20 00 00 00 00 00 00 00 00 00 00 00 00 00 30 [pixma] 00000010:00 00 00 00 80 4b 80 4b 00 00 00 00 00 00 00 00 [pixma] 00000020:00 00 02 80 00 00 03 6d 08 18 00 00 00 00 00 00 [pixma] 00000030:ff 00 00 81 00 00 02 01 00 00 00 00 00 00 00 d5 [pixma] [pixma] IN T=5.176 len=8 [pixma] 00000000:06 06 00 00 00 00 00 00 [pixma] [pixma] OUT T=5.178 len=16 [pixma] 00000000:f3 20 00 00 00 00 00 00 00 00 00 00 00 00 00 10 [pixma] [pixma] IN T=5.180 len=24 [pixma] 00000000:06 06 00 00 00 00 00 00 01 00 00 00 00 03 00 02 [pixma] 00000010:00 00 21 00 00 00 00 d9 [pixma] [pixma] Current status: paper=0 cal=0 lamp=2 busy=0 [pixma] INTR T=5.399 len=16 [pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [pixma] [pixma] Sending time: '10/07/24 23:27' [pixma] OUT T=5.401 len=36 [pixma] 00000000:eb 80 00 00 00 00 00 00 00 00 00 00 00 00 00 14 [pixma] 00000010:31 30 2f 30 37 2f 32 34 20 32 33 3a 32 37 00 00 [pixma] 00000020:00 00 00 4c [pixma] [pixma] IN T=5.403 len=8 [pixma] 00000000:06 06 00 00 00 00 00 00 [pixma] [pixma] INTR T=18.069 len=16 [pixma] 00000000:00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 [pixma] [pixma] OUT T=18.071 len=16 [pixma] 00000000:f3 20 00 00 00 00 00 00 00 00 00 00 00 00 00 10 [pixma] [pixma] IN T=18.073 len=24 [pixma] 00000000:06 06 00 00 00 00 00 00 01 00 00 00 00 03 00 02 [pixma] 00000010:00 01 21 00 00 00 00 d8 [pixma] [pixma] Current status: paper=0 cal=0 lamp=2 busy=1 [pixma] OUT T=19.079 len=16 [pixma] 00000000:d4 20 00 00 00 00 00 00 00 00 00 00 00 08 00 08 [pixma] [pixma] IN T=19.081 len=512 [pixma] 00000000:06 06 00 00 00 00 00 00 00 00 00 00 00 03 80 00 [pixma] 00000010:bd 91 8a b1 94 9a bc 91 93 aa 97 a6 bf 93 ab b7 (snipped some useless stuff) [pixma] 000001f0:8c 7b 73 92 80 73 8a 7f 73 8b 83 75 87 7f 73 89 [pixma] [pixma] IN T=19.090 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] IN T=19.093 len=-9 [pixma] ERROR: ETIMEDOUT [pixma]

Hi,

that seems to be a problem with the pixma-backend...
Ask at the sane-project mailinglist for a support on that. Maybe they can help you any further...

http://lists.alioth.debian.org/mailm...nfo/sane-devel

1 Attachment(s)

please help!!! I have some troubles with Canon Pixma MP810

xsane permanently write FAIL Error: Error during device I/O

[root@rtn16 root]$ scanimage -L
device `pixma:04A9171A_313DEE' is a CANON Canon PIXMA MP810 multi-function peripheral

[root@rtn16 root]$ scanimage -T >> /tmp/sane-log.log
scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1914 bytes... FAIL Error: Error during device I/O

/tmp/sane-log.log is empty

/opt/etc/sane.d/saned.conf

Code:

# saned.conf # Configuration for the saned daemon ## Daemon options # Port range for the data connection. Choose a range inside [1024 - 65535]. # Avoid specifying too large a range, for performance reasons. # # ONLY use this if your saned server is sitting behind a firewall. If your # firewall is a Linux machine, we strongly recommend using the # Netfilter nf_conntrack_sane connection tracking module instead. # # data_portrange = 10000 - 10100 ## Access list # A list of host names, IP addresses or IP subnets (CIDR notation) that # are permitted to use local SANE devices. IPv6 addresses must be enclosed # in brackets, and should always be specified in their compressed form. # # The hostname matching is not case-sensitive. #scan-client.somedomain.firm #192.168.0.1 192.168.1.0/24 #[2001:7a8:185e::42:12] #[2001:7a8:185e::42:12]/64 # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and # /etc/services must also be properly configured to start # the saned daemon as documented in saned(8), services(4) # and inetd.conf(4) (or xinetd.conf(5)).

putty.log in attachment
sorry for my english.. :(

Hi,

there is no entry in your:

Code:

/opt/etc/sane.d/saned.conf

That might be the reason for xsane-error. Look at 2.3 on the HowTo.

Please post the output of:

Code:

sane-find-scanner

and

Code:

scanimage -L

Thanks for answer!

Quote:

Originally Posted by carterb

Hi,

there is no entry in your:

Code:

/opt/etc/sane.d/saned.conf

That might be the reason for xsane-error. Look at 2.3 on the HowTo.

Code:

# saned.conf # Configuration for the saned daemon ## Daemon options # Port range for the data connection. Choose a range inside [1024 - 65535]. # Avoid specifying too large a range, for performance reasons. # # ONLY use this if your saned server is sitting behind a firewall. If your # firewall is a Linux machine, we strongly recommend using the # Netfilter nf_conntrack_sane connection tracking module instead. # # data_portrange = 10000 - 10100 ## Access list # A list of host names, IP addresses or IP subnets (CIDR notation) that # are permitted to use local SANE devices. IPv6 addresses must be enclosed # in brackets, and should always be specified in their compressed form. # # The hostname matching is not case-sensitive. #scan-client.somedomain.firm #192.168.0.1 192.168.1.0/24 #[2001:7a8:185e::42:12] #[2001:7a8:185e::42:12]/64 # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and # /etc/services must also be properly configured to start # the saned daemon as documented in saned(8), services(4) # and inetd.conf(4) (or xinetd.conf(5)).

Quote:

Please post the output of:

Code:

sane-find-scanner

Code:

[root@rtn16 root]$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x04a9 [Canon], product=0x171a [MP810]) at libusb:001:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.

and

Quote:

Code:

scanimage -L

Code:

[root@rtn16 root]$ scanimage -L [pixma] udp_command: no data received (recv): Connection refused[pixma] udp_command: no data received (recv): Connection refused[pixma] udp_command: no data received (recv): Connection refused[pixma] Cannot read scanner make & model: device `pixma:04A9171A_313DEE' is a CANON Canon PIXMA MP810 multi-function peripheral

I`m reinstall sane and output "scanimage -L" was changed

Code:

[root@rtn16 root]$ scanimage -L device `pixma:04A9171A_313DEE' is a CANON Canon PIXMA MP810 multi-function peripheral

but scanning dont work...

Great howto

Hi.
first of all: great work Oliver

I'm trying to get this to work in dd-wrt version v24-sp2 (08/07/10) mega (I know, this is not the right firmware).
My scanner is a HP psc 1610 (printer and scanner all in one), witch on sane-project side is reported to work "good", and also is functioning perfectly if connected directly to my ubuntu box.

kernalversion 2.4
scanimange version 1.0.21
hplip version 2.8.12-1
dbus - 1.2.16-2
dbus-glib - 0.82-1

I had some trouble to get hp-probe to find my scanner. For some strange reason the models.py searched for the models.dat fil in /tmp/root/data/models and not /opt/share/hplips/models. To make a workaround i hardcoded the right path in models.py.
Then scanimage -L gave the output:
device `hpaio:/usb/PSC_1600_series?serial=MY62SC13KY04GH' is a Hewlett-Packard PSC_1600_series all-in-one
and sane-find-scanner:
<---snipped --->
found USB scanner (vendor=0x03f0 [HP], product=0x4811 [PSC 1600 series]) at libusb:001:009
<---snipped --->

This all seams promising. But when trying scanimage >/op/tmp/img.pnm i get this error:
<--- snipped --->
arguments to dbus_connection_send() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 3141.
<--- snipped --->
D-Bus not compiled with backtrace support so unable to print a backtrace.

How do I get some more debugging info out of scanimage?

edit: added notification :)

xsane - no devices avalaible but sane server works fine

Hi
I have a problem with xsane application. I have installed sane-server sucessful according to how-to.When I wanted scan from xsane on windows or on linux,it showed -no device available.

I found out if I type scanimage -T,I get i/o error.
scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1914 bytes... FAIL Error: Error during device I/O

i have canon MP220

can you help me please?
thanks

sorry for my english ... :)

Hi all,

@poulsen: What kernel version exactly?

@Parkinstein: Don't know the reason yet...? Seems to me a sane-problem (not router related). Please ask at the sane-mailing-list.
http://lists.alioth.debian.org/mailm...nfo/sane-devel

@msio: What system are you using?

Quote:

Originally Posted by carterb

Hi all,
@poulsen: What kernel version exactly?

The exact kernal version is 2.4.37 from dd-wrt.

Hi

I got a little progress.
I got dbus playing a little nicer... by changing in the config-files for dbus (and /opt/etc/init.d/S20dbus) and changing the user dbus runs too the username that is on the router.
Now when i run scanimage -T I'm asked for a password.

I'll investigate a this some more and return later

Edit:
when running command scanimage -T I get this
WARNING: backend requested plain-text password
Authentification required for resource net:localhost:▒. Enter username: XXXX
Enter password:
Segmentation fault

Quote:

Originally Posted by carterb

Hi all,

@poulsen: What kernel version exactly?

@Parkinstein: Don't know the reason yet...? Seems to me a sane-problem (not router related). Please ask at the sane-mailing-list.
http://lists.alioth.debian.org/mailm...nfo/sane-devel

@msio: What system are you using?

i am using kernel 2.4.20 from Oleg ... thanks:)

First off; thanks carterb for maintaining the sane-backend package and for making the updated hplip package. Following this tutorial I have gotten my HP F4480 90% of the way to printing; the last 10% turns out is due to the fact that I need a minimum of 3.9.6 HPLIP to support this device according to the HP Website. Do you plan to update your 3.9.2 pacakge?

Thanks for all your great work.

I followed this howto about a year ago and was a happy user of my shared Epson RX 520, ...

Recently I installed a new desktop PC dualboot Ubuntu Maverick and Windows 7, both 64-bit - on both OSes scanning and/or printing over the network dit not work as it should:

on W7, prints half a page, then garbish;
scanning on W7 and ubuntu starts, but Xsane hangs before the page is completely scanned, ...

Scanning and printing with RX 520 directly attached to USB works OK on the same PC.

Also any problem for scanning and printing over the network with my older PC's (32 bit OS).

Anyone experienced the same problems ?

Thx

Hi,

@adolchristin: I can build a new version. May take some days...

@msio: Is that the newest kernel release??

need some help: saned and printing

Hello!
I've got an RT-N16 with the new Oleg (rev around 2080), and a HP LaserJet 3300 multifunctional printer.
I set up sane-backends and hplip with the help of the guide I've read here, but sane-find-scanner couldn't find my laserjet.
I searched for answers and found out that I need dbus and snmp too.
I installed both packages, but dbus gave segfault, so I replaced it with an older one.
This way sane-find-scanner still couldn't find the scanner, but hp-probe could, so finally scanning works.

The problem is that when I scan using XSane, the /dev/lp0 disappears, so I can't print anymore. I've read that this is normal and printing can be done by using cups, so I installed that package too.

It also gave segfault so once again I installed an older version of cups.
But! When I try to start cups, it crashes. The message in the system log is "/opt/var/spool/cups is not a directory!" despite the fact that the directory exists and is a directory.

That's all I think and sorry for the long post.
Someone please help me to make both printing and scanning possible!

Thanks in advance:
GandC

@carterb
I guess you have successfully built the sane-backends from the sources in your router, right? If so, could you provide some instructions how you build the sane-backends package from the sources? I tried to build the version 1.0.20 in my WL-500gPV2, however, I encountered some errors. The first problem is what to select as the build type when running ./configure? The configuration script does not automatically guess my system, so I have to set it manually. I used "mips", however, this makes the compilation fail so it probably isn't the correct build type.

And why am I building this from the sources? I just can't get my scanner to work with my router with the version 1.0.21 of sane-backends so I have to revert back to 1.0.20 which I know was working earlier. Even better would be if someone could provide me the 1.0.20 version as an ipk package which would be easier to install than building from the sources.

@carterb can you upload hplip to other server?
i'm having problems downloading from rapidshare

Quote:

Originally Posted by carterb

Hi,
@adolchristin: I can build a new version. May take some days...

Please take your time; thank you for maintaining this package, I know we all appreciate it.

4 Attachment(s)

Greetings.
I need help.
I have wl500gp with 1.9.2.7-d-r1825 firmware. Also I have HP PhotoSmart c5283. And I should use it as scanner too (it works perfectly as printer).
I have installed sane-backends with all libs needed and hplip 3.9.2. Shorter I have exactly followed the HOW-TO. But it doesn`t work.

Input:

Code:

sane-find-scanner

Output:

Code:

Segmentation fault

Input:

Code:

scanimage -L

Output:

Code:

Segmentation fault

I have installed XSane on WinXP as described too.

When I run Xsane there is a message in /opt/var/log/xinetd.log:

10/10/3@14:43:53: START: saned pid=3559 from=192.168.1.5

Else,
Input:

Code:

xinetd -d

Output:

Code:

10/10/3@14:49:30: DEBUG: 3587 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/saned [file=/opt/etc/xinetd.conf] [line=16] 10/10/3@14:49:30: DEBUG: 3587 {handle_includedir} Reading included configuration file: /opt/etc/xinetd.d/swat [file=/opt/etc/xinetd.d/swat] [line=12] Service defaults Instances = 60 CPS = max conn:25 wait:30 Bind = All addresses. Only from: localhost(HOST) 10.0.0.0/255.0.0.0(NET) 172.16.0.0/255.240.0.0(NET) 192.168.1.0/255.255.0.0(NET) No access: No blocked sites Logging to file: /opt/var/log/xinetd.log (no limits) Log_on_success flags = HOST PID Log_on_failure flags = HOST Service configuration: saned id = saned flags = IPv4 socket_type = stream Protocol (name,number) = (tcp,6) port = 6566 wait = no user = 0 group = 0 Groups = no PER_SOURCE = -1 Bind = All addresses. Server = /opt/sbin/saned Server argv = saned Only from: localhost(HOST) 10.0.0.0/255.0.0.0(NET) 172.16.0.0/255.240.0.0(NET) 192.168.1.0/255.255.0.0(NET) No access: No blocked sites Logging to common log file Log_on_success flags = HOST PID Log_on_failure flags = HOST Service configuration: swat id = swat flags = IPv4 socket_type = stream Protocol (name,number) = (tcp,6) port = 901 wait = no user = 0 Groups = no PER_SOURCE = -1 Bind = All addresses. Server = /opt/sbin/swat Server argv = swat Only from: localhost(HOST) 192.168.1.0/255.255.255.0(NET) No access: No blocked sites Logging to common log file Log_on_success flags = HOST PID Log_on_failure flags = HOST USERID 10/10/3@14:49:30: ERROR: 3587 {activate_normal} bind failed (Address already in use (errno = 125)). service = saned 10/10/3@14:49:30: ERROR: 3587 {cnf_start_services} Service saned failed to start and is deactivated. 10/10/3@14:49:30: ERROR: 3587 {activate_normal} bind failed (Address already in use (errno = 125)). service = swat 10/10/3@14:49:30: ERROR: 3587 {cnf_start_services} Service swat failed to start and is deactivated. 10/10/3@14:49:30: DEBUG: 3587 {cnf_start_services} mask_max = 0, services_started = 0 10/10/3@14:49:30: CRITICAL: 3587 {init_services} no services. Exiting...

Contents of
/opt/etc/xinetd.conf,
/opt/etc/xinetd.d/saned,
/opt/etc/sane.d/saned.conf,
C:\sane\etc\sane.d\net.conf
are below (in attachments).

2 Attachment(s)

Ok. I`ve solved the problem.
I have reinstalled sane-backends and libs required.

If someone will be interested in..

Oliver,
Thanks for this How-To.
I'm use now HP7400C with wl500gP and can scan on desktop Win7(32) and netbook WinXP(32) with XSane.

arguments to dbus_connection_send() were incorrect

Hi.

I have another problem.

After sane-backends and libs reinstalling result was:

sane-find-scanner:

Code:

# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x03f0 [HP], product=0x5d11 [Photosmart C5200 series]) at libusb:003:004 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.

scanimage -L:

Code:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

Then I have installed python, cups and dbus (it wasn`t installed before). The result:

scanimage -L:

Code:

device `hpaio:/usb/Photosmart_C5200_series?serial=MY87EG22GZ0559' is a Hewlett-Packard Photosmart_C5200_series all-in-one

But when I try scanimage --format=tiff >/tmp/mnt/hdd_ext/test.tiff I get:

Code:

process 1169: arguments to dbus_connection_send() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 3141. This is normally a bug in some application using the D-Bus library. D-Bus not compiled with backtrace support so unable to print a backtrace Aborted

Anybody help.
Thanks

It`s works!

Victory!
I can scan by HP PhotoSmart c5283 now.
I intently viewed the forum :) and solution was found:
http://wl500g.info/showpost.php?p=189850&postcount=108
I had the same symptoms as described in http://wl500g.info/showthread.php?t=20098.
I changed dbus from 1.2.16-1 to 1.1.1-3.

Thus I came to current working condition through installing the following packages:
libusb - 0.1.12-2
libtiff - 3.9.4-1
libjpeg - 6b-3
libieee1284 - 0.2.11-1
sane-backends - 1.0.21-1
cups - 1.4.4-1
dbus - 1.1.1-3 (from http://wl500g.info/showpost.php?p=202794&postcount=12)
hplip - 3.9.2-1 (from http://wl500g.info/showpost.php?p=199955&postcount=119)

Else.
I had to add one line into post-boot script.

Code:

rm /opt/var/run/dbus/*

During the router starting /opt/etc/init.d/S20dbus do not examine whether daemon has already started or not.
If there is PID file in /opt/var/run/dbus/ S20dbus suppose daemon has already started. To be sure it actually starts we need to remove PID file before S20dbus is execute.
(Idea was peeped here)

Many thanks to Oliver for the How-To (and for XSane too)!

Samsung 4623f, development (git) version of backend

Hi - I'm using an Asus WL-500gp V2 running Tomato.
I'm new to this whole Tomato / Sane thing.

I've installed sane-backends 1.0.21-1 using optware / ipkg. However, I would like to get this working with a Samsung 4623 scanner, which is only supported in the development (git) version of sane-backends. Is there any way I can install the development version of sane-backends? Does anyone have the development version compiled so that I can install it with ipkg? Thank you.

Hi,

Quote:

Originally Posted by electropanda

Victory!
I can scan by HP PhotoSmart c5283 now.
I intently viewed the forum :) and solution was found:
http://wl500g.info/showpost.php?p=189850&postcount=108
...

nice to hear. I will link to your post in the HowTo.
Strange problems with dbus versions...??

Hi,

Quote:

Oliver,
Thanks for this How-To.
I'm use now HP7400C with wl500gP and can scan on desktop Win7(32) and netbook WinXP(32) with XSane.
Beitrag bearbeiten/löschen

thanks for the information!

Alternatively, is there some kind of newbie's guide to compiling SANE? For example, I tried downloading the source from git, but wasn't sure what parameters to use for configure.

Quote:

Originally Posted by protective1

Hi - I'm using an Asus WL-500gp V2 running Tomato.
I'm new to this whole Tomato / Sane thing.

I've installed sane-backends 1.0.21-1 using optware / ipkg. However, I would like to get this working with a Samsung 4623 scanner, which is only supported in the development (git) version of sane-backends. Is there any way I can install the development version of sane-backends? Does anyone have the development version compiled so that I can install it with ipkg? Thank you.

Samsung SCX-4200 no longer work

Hi!
Deleted.