MF627

Printable View

Show 40 post(s) from this thread on one page

28-08-2009, 08:22
vectorm

Èòàê, ïîêîïàëñÿ â ñâîå ìîäåìå.
Ó ìåíÿ âåðñèÿ ïðîøèâêè BD_BLNP673M3V1.0.1B02, ò.å. íå øüåòñÿ íè îäíîé îáíîâëÿëêîé. Ðàçáèðàòüñÿ â ðó÷íûõ ìàíèïóëÿöèÿõ ïîêà íå ñ ðóêè.
Ïëþñ äëÿ ýòèõ ïðîøèâîê òðåáóåòñÿ íîâûé õèòðûé àëãîðèòì çàñûëêè ZOPERTE.
Òàê ÷òî ïðîâåðÿéòå èíñòðóêöèþ ñàìè, è îáÿçàòåëüíî îòïèøèòåñü ïî ïîâîäó çàòû÷êè.
01-09-2009, 20:22
Masheroff

×òî çà ìóòü?

Code:

Jan 1 00:00:07 kernel: usbserial.c: USB Serial support registered for Generic Jan 1 00:00:07 kernel: usbserial.c: Generic converter detected Jan 1 00:00:07 kernel: usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Jan 1 00:00:07 kernel: usbserial.c: Generic converter detected Jan 1 00:00:07 kernel: usbserial.c: Generic converter now attached to ttyUSB1 (or usb/tts/1 for devfs) Jan 1 00:00:07 kernel: usbserial.c: Generic converter detected Jan 1 00:00:07 kernel: usbserial.c: Generic converter now attached to ttyUSB2 (or usb/tts/2 for devfs) Jan 1 00:00:07 kernel: usbserial.c: USB Serial Driver core v1.4 Jan 1 00:00:27 pppd[125]: pppd 2.4.5 started by admin, uid 0 Jan 1 00:00:31 pppd[125]: Serial connection established. Jan 1 00:00:32 pppd[125]: Using interface ppp0 Jan 1 00:00:32 pppd[125]: Connect: ppp0 <--> /dev/usb/tts/2 Jan 1 00:00:32 kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling... Jan 1 00:00:32 kernel: usb.c: USB disconnect on device 00:03.1-1 address 2 Jan 1 00:00:32 kernel: usbserial.c: Generic converter now disconnected from ttyUSB0 Jan 1 00:00:32 kernel: usbserial.c: Generic converter now disconnected from ttyUSB1 Jan 1 00:00:32 kernel: usbserial.c: Generic converter now disconnected from ttyUSB2 Jan 1 00:00:32 pppd[125]: Hangup (SIGHUP) Jan 1 00:00:32 pppd[125]: Modem hangup Jan 1 00:00:32 pppd[125]: Connection terminated. Jan 1 00:00:33 kernel: hub.c: new USB device 00:03.1-1, assigned address 3 Jan 1 00:00:33 kernel: usbserial.c: Generic converter detected Jan 1 00:00:33 kernel: usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Jan 1 00:00:33 kernel: usbserial.c: Generic converter detected Jan 1 00:00:33 kernel: usbserial.c: Generic converter now attached to ttyUSB1 (or usb/tts/1 for devfs) Jan 1 00:00:33 kernel: usbserial.c: Generic converter detected Jan 1 00:00:33 kernel: usbserial.c: Generic converter now attached to ttyUSB2 (or usb/tts/2 for devfs) Jan 1 00:00:33 kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling... Jan 1 00:00:33 kernel: usb.c: USB disconnect on device 00:03.1-1 address 3 Jan 1 00:00:33 kernel: usbserial.c: Generic converter now disconnected from ttyUSB0 Jan 1 00:00:33 kernel: usbserial.c: Generic converter now disconnected from ttyUSB1 Jan 1 00:00:33 kernel: usbserial.c: Generic converter now disconnected from ttyUSB2 Jan 1 00:00:33 pppd[125]: Exit. Jan 1 00:00:33 kernel: hub.c: new USB device 00:03.1-1, assigned address 4 Jan 1 00:00:33 kernel: usbserial.c: Generic converter detected Jan 1 00:00:33 kernel: usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Jan 1 00:00:33 kernel: usbserial.c: Generic converter detected Jan 1 00:00:33 kernel: usbserial.c: Generic converter now attached to ttyUSB1 (or usb/tts/1 for devfs) Jan 1 00:00:33 kernel: usbserial.c: Generic converter detected Jan 1 00:00:33 kernel: usbserial.c: Generic converter now attached to ttyUSB2 (or usb/tts/2 for devfs) Jan 1 00:00:34 kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling... Jan 1 00:00:34 kernel: usb.c: USB disconnect on device 00:03.1-1 address 4 Jan 1 00:00:34 kernel: usbserial.c: Generic converter now disconnected from ttyUSB0 Jan 1 00:00:34 kernel: usbserial.c: Generic converter now disconnected from ttyUSB1 Jan 1 00:00:34 kernel: usbserial.c: Generic converter now disconnected from ttyUSB2 Jan 1 00:00:34 dnsmasq-dhcp[72]: DHCPDISCOVER(br0) 00:1d:e0:2c:0c:c9 Jan 1 00:00:34 dnsmasq-dhcp[72]: DHCPOFFER(br0) 192.168.1.54 00:1d:e0:2c:0c:c9 Jan 1 00:00:34 dnsmasq-dhcp[72]: DHCPREQUEST(br0) 192.168.1.54 00:1d:e0:2c:0c:c9 Jan 1 00:00:34 dnsmasq-dhcp[72]: DHCPACK(br0) 192.168.1.54 00:1d:e0:2c:0c:c9 Jan 1 00:00:34 kernel: hub.c: new USB device 00:03.1-1, assigned address 5 Jan 1 00:00:34 kernel: usb.c: USB device not accepting new address=5 (error=-71) Jan 1 00:00:34 kernel: hub.c: new USB device 00:03.1-1, assigned address 6 Jan 1 00:00:34 kernel: usb.c: USB device not responding, giving up (error=-71)

Âîò ÷òî çà ìóòü çà ïîñòîÿííûì îòêëþ÷åíèåì-ïîäêëþ÷åíèåì MF626? Ñíà÷àëà ìîäåì âêëþ÷åí áûë íàïðÿìóþ, ïîòîì ÷åðåç õàá.
04-09-2009, 17:46
lit110

3G beeline è WL-500gV

Дайте ссылку на прошивку WL-500gV чтобы работал с 3G beeline.
04-09-2009, 19:45
vectorm

Quote:

Originally Posted by lit110

Äàéòå ññûëêó íà ïðîøèâêó WL-500gV ÷òîáû ðàáîòàë ñ 3G beeline.

×òî ýòî çà ðîóòåð òàêîé?
È ïî÷åìó ïðîñüáà â ïðèêàçíîì ïîðÿäêå?
Âàì íàäî - â ïîèñêå âñå äàààâíî åñòü.
04-09-2009, 21:16
lit110

Не написал пожалуйста.Роутер WL-500gpv2 прошивка 1.9.2.7-d-r382M и usb модем beeline MF 626 помогите настроить через вебинтерфейс,только опять пожалуйста не пинайте.
05-09-2009, 05:50
oleg71

Quote:

Originally Posted by lit110

Íå íàïèñàë ïîæàëóéñòà.Ðîóòåð WL-500gpv2 ïðîøèâêà 1.9.2.7-d-r382M è usb ìîäåì beeline MF 626 ïîìîãèòå íàñòðîèòü ÷åðåç âåáèíòåðôåéñ,òîëüêî îïÿòü ïîæàëóéñòà íå ïèíàéòå.

http://wl500g.info/showthread.php?t=18155
05-09-2009, 16:51
oleg71

Quote:

Originally Posted by lit110

Íå íàïèñàë ïîæàëóéñòà.Ðîóòåð WL-500gpv2 ....

Îäîëæåíèé íèêòî íå ïðîñèë.

Êàê çäåñü âñå êðóòî ïåðåìåùàåòñÿ :D
_________________________________

Â îáùåì íå çíàþ ÷òî âû òàì ãîñïîäà ðàçðàáîò÷èêè íàáåäàêóðèëè,
íî íà 520-é âäðóã ïîäñêî÷èëà ñêîðîñòü ïî òåñòàì Speedtest.net (ïðàâäà,
íå íàìíîãî, áûëî îò 1 Ìáèò\ñ äî 1,2 - ñòàëî îò 1,48 äî 1,96
ïåðåä çàìåðàìè:
ÿ ïîäóìàë, ÷òî õóæå íå áóäåò è ñäåëàë êàê ïîñîâåòîâàë
theMIROn

Code:

nvram wan0_pptp_kernel=1 && nvram commit

õîòÿ íå äîëæíî áûòü ïðàâäîé :confused:

×òî ïîâëèÿëî - ïðîøèâêà èëè ÿäð¸ííîñòü - íå çíàþ...

P/S/ À ìîæåò îïåðàòîð ñìåíèë ïðîøèâêó :)))
06-09-2009, 18:26
lit110

Огромное спасибо за инструкцию .Все получилось
06-09-2009, 21:58
lit110

Получилось ,но рано радовался через 2 минуты перезагружается У меня версия прошивки BD_BLNP673M3V1.0.1B02
07-09-2009, 10:37
lit110

Есть чешская прошивка USB 1.71 телефон NOKIA работает с ней идеально.
Может возможно с этой прошивкой настроить ZTE626 beeline?
07-09-2009, 11:44
oleg71

Quote:

Originally Posted by lit110

Åñòü ÷åøñêàÿ ïðîøèâêà USB 1.71 òåëåôîí NOKIA ðàáîòàåò ñ íåé èäåàëüíî.
Ìîæåò âîçìîæíî ñ ýòîé ïðîøèâêîé íàñòðîèòü ZTE626 beeline?

Åëêè-ìîòàëêè - íå ïîéìó ÿ âàøèõ ýêñïåðèìåíòîâ!
Â ïåðâîì ïîñòå òåìû - èíñòðóêöèÿ - è âñå!
Ðàáîòàåò ÷åòêî, ÿ óæå è íà ìîäåì íå ñìîòðþ...
äàæå ïðè ïåðåïðîøèâêå: âûòàùèë - ïðîøèë - âñòàâèë - ðàáîòàåò!
ñáîé áûë êîãäà áàáêè çàêîí÷èëèñü :D
07-09-2009, 12:10
vectorm

Quote:

Originally Posted by lit110

Ïîëó÷èëîñü ,íî ðàíî ðàäîâàëñÿ ÷åðåç 2 ìèíóòû ïåðåçàãðóæàåòñÿ Ó ìåíÿ âåðñèÿ ïðîøèâêè BD_BLNP673M3V1.0.1B02

Äëÿ ýòîé, è áîëåå íîâûé ïðîøèâîê, íóæåí õèòðûé ñêðèïò. Ïîêà â ñâîáîäíîì äîñòóïå ÿ åãî íå âèäåë.
07-09-2009, 19:38
lit110

Получается WL-500gPV2 и USB модем ZTE 626 beeline с версией прошивки модема BD_BLNP673M3V1.0.1B02 без разрывов через 2 минуты настроить не получится?
08-09-2009, 11:29
oleg71

Âîò ÷òî-òî ïðîñêà÷èëî:

Code:

Äåëî â òîì, ÷òî ìîäåì ïîñòîÿííî ñèíõðîíèçèðóåòñÿ ñ ñåòåâîé êàðòîé ÷åðåç ôàéë DLL_Netcard_R.dll, ñâÿçàííûé ñ ÁÈÄ.åõå ôàéëîì db.dat.

î ÷åì ðå÷ü - ïîíÿòèÿ íå èìåþ, íî âäðóã ïîìîæåò!
08-09-2009, 13:41
Masheroff

Ñêðèïò äëÿ íîâûõ MF626

Åñëè áû êòî ñêðèïò ñìîã íàïèñàòü... àëãîðèòì ó ìåíÿ åñòü. Îí íåñëîæíûé.

Show 40 post(s) from this thread on one page